XAA117

XAA117
Dual Single-Pole, Normally Open
OptoMOS® Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
On-Resistance (max)
LED Current to Operate
Ratings
60
150
16
1
Units
VP
mArms / mADC

mA
Description
The XAA117 is a dual, single-pole, normally open
(1-Form-A) Solid State Relay with two independently
controlled, optically coupled MOSFET switches that
feature 3750Vrms of input to output isolation.
The optically coupled outputs, which use the
patented OptoMOS architecture, are controlled by a
highly efficient GaAIAs infrared LED.
Features
• Low Input Control Current: 1mA
• 3750Vrms Input/Output Isolation
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• Arc-Free With No Snubbing Circuits
• FCC Compatible
• VDE Compatible
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Surface Mount Tape & Reel Version Available
This dual single-pole OptoMOS relay provides a more
compact design solution than discrete single-pole
relays in a variety of applications, and saves board
space by incorporating both switches in a single 8-Pin
package.
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Compliant
Applications
• Security
• Passive Infrared Detectors (PIR)
• Data Signaling
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Ordering Information
Part #
XAA117
XAA117S
XAA117STR
XAA117P
XAA117PTR
Description
8-Pin DIP (50/Tube)
8-Pin Surface Mount (50/Tube)
8-Pin Surface Mount (1,000/Reel)
8-Pin Flat Pack (50/Tube)
8-Pin Flat Pack (1,000/Reel)
Pin Configuration
+ Control - Switch #1
– Control - Switch #1
+ Control - Switch #2
– Control - Switch #2
1
8
2
7
3
6
4
5
Load - Switch #1
Load - Switch #1
Load - Switch #2
Load - Switch #2
Switching Characteristics of
Normally Open Devices
Form-A
IF
90%
10%
ILOAD
ton
Pb
DS-XAA117-R03
toff
e3
www.ixysic.com
1
INTEGRATED CIRCUITS DIVISION
XAA117
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
Total Power Dissipation 2
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
1
2
Ratings
60
5
50
1
150
800
3750
-40 to +85
-40 to +125
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Derate linearly 1.33 mW / ºC
Derate linearly 6.67 mW / ºC
Electrical Characteristics @ 25ºC
Parameter
Output Characteristics
Load Current
Continuous 1
Peak
On-Resistance
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics
Input Control Current to Activate
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
Common Characteristics
Input to Output Capacitance
1
2
Conditions
Symbol
Min
Typ
Max
Units
t =10ms
IL=150mA
VL=60VP
IL
ILPK
RON
ILEAK
-
7
-
150
±400
16
1
mArms / mADC
mAP

VL=50V, f=1MHz
ton
toff
COUT
-
0.1
0.5
25
5
5
-
IL=150mA
IF=5mA
VR=5V
IF
VF
IR
0.05
0.9
-
1.2
-
1
1.4
10
mA
mA
V
µA
-
CI/O
-
3
-
pF
IF=5mA, VL=10V
µA
ms
pF
If both poles operate simultaneously, then the load current must be derated so as not to exceed the package power dissipation value.
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
XAA117
PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
25
25
20
15
10
15
10
5
5
1.21
75
1.22
1.23
1.24
1.25
LED Forward Voltage Drop (V)
Typical IF for Switch Operation
(N=50, IL=100mA)
25
20
15
10
5
0
0
0
Typical Turn-Off Time
(N=50, IF=5mA, IL=100mA)
25
20
Device Count (N)
Device Count (N)
30
Device Count (N)
35
Typical Turn-On Time
(N=50, IF=5mA, IL=100mA)
80
85
90
95
Turn-On Time (Ps)
100
0.35
105
0.45 0.50 0.55 0.60
Turn-Off Time (ms)
0.65
Typical Blocking Voltage Distribution
(N=50)
Typical On-Resistance Distribution
(N=50, IL=100mA)
20
0.40
35
15
10
5
10
5
25
20
15
10
0
0
0.05
0.06
0.07 0.08 0.09 0.10
LED Current (mA)
0.11
1200
1.5
7.0
7.1
7.2
On-Resistance (:)
84
7.4
7.3
Typical Turn-On Time
vs. LED Forward Current
(IL=100mA)
Typical LED Forward Voltage Drop
vs. Temperature
1.6
6.9
6.8
IF=20mA
1.3
IF=10mA
IF=5mA
IF=2mA
IF=1mA
1.2
1.1
1.0
-40
Turn-Off Time (Ps)
1.4
800
600
400
200
0
20
40
60
Temperature (ºC)
80
100
0
Typical IF to Operate vs. Temperature
(IL=100mA)
86
87
88
89
Blocking Voltage (VP)
90
480
475
470
465
460
0
-20
85
Typical Turn-Off Time
vs. LED Forward Current
(IL=100mA)
485
1000
IF=50mA
Turn-On Time (Ps)
LED Forward Voltage Drop (V)
15
5
0
0.18
Device Count (N)
Device Count (N)
Device Count (N)
30
20
5
10
15
LED Forward Current (mA)
0
20
Typical Turn-On Time
vs. Temperature
(IL=50mA)
600
5
10
15
LED Forward Current (mA)
20
Typical Turn-Off Time
vs. Temperature
(IL=50mA)
800
IF=1mA
0.14
0.12
0.10
0.08
-40
700
Turn-Off Time (Ps)
Turn-On Time (Ps)
IF (mA)
0.16
500
400
300
200
IF=5mA
0
20
40
60
Temperature (ºC)
80
100
0
-40
IF=1mA & IF=5mA
500
400
300
100
-20
600
-20
0
20
40
60
Temperature (ºC)
80
100
200
-40
-20
0
20
40
60
Temperature (ºC)
80
100
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
R03
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
XAA117
PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
Typical Load Current
vs. Load Voltage
(IF=1mA)
Typical On-Resistance
vs. Temperature
(IF=5mA, IL=50mA)
12
150
9
8
7
Load Current (mA)
10
Current (mA)
0.1
0.0
-0.1
6
-0.2
5
-40
-0.3
-1.5
-20
0
20
40
60
Temperature (ºC)
80
100
-1.0
-0.5
0.0
0.5
1.0
Typical Leakage vs. Temperature
Measured Across Pins 5&6 or 7&8
Leakage (nA)
88
86
8
6
4
2
-20
0
20
40
60
Temperature (ºC)
80
100
110
Both Poles
100
90
0
-40
-20
0
20
40
60
Temperature (ºC)
80
100
-20
0
20
40
60
Temperature (ºC)
80
100
Energy Rating Curve
10
90
120
-40
12
92
130
70
1.5
Voltage (V)
94
Single Pole
140
80
Load Current (A)
On-Resistence (:)
0.2
Typical Blocking Voltage
vs. Temperature
Blocking Voltage (VP)
160
0.3
11
84
-40
Maximum Load Current
vs. Temperature
(IF=2mA)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10Ps 100Ps 1ms 10ms 100ms
Time
1s
10s 100s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
4
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
XAA117
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
XAA117 / XAA117S / XAA117P
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
XAA117 / XAA117S
250ºC for 30 seconds
XAA117P
260ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
Pb
R03
e3
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
XAA117
Mechanical Dimensions
XAA117
2.540 ± 0.127
(0.100 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
8-0.800 DIA.
(8-0.031 DIA.)
2.540 ± 0.127
(0.100 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
6.350 ± 0.127
(0.250 ± 0.005)
Pin 1
PCB Hole Pattern
7.620 ± 0.254
(0.300 ± 0.010)
6.350 ± 0.127
(0.250 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
0.457 ± 0.076
(0.018 ± 0.003)
7.620 ± 0.127
(0.300 ± 0.005)
7.239 TYP.
(0.285)
4.064 TYP
(0.160)
7.620 ± 0.127
(0.300 ± 0.005)
0.254 ± 0.0127
(0.010 ± 0.0005)
Dimensions
mm
(inches)
0.813 ± 0.102
(0.032 ± 0.004)
XAA117S
9.652 ± 0.381
(0.380 ± 0.015)
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
Pin 1
0.635 ± 0.127
(0.025 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
9.525 ± 0.254
(0.375 ± 0.010)
0.457 ± 0.076
(0.018 ± 0.003)
PCB Land Pattern
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
7.620 ± 0.254
(0.300 ± 0.010)
0.254 ± 0.0127
(0.010 ± 0.0005)
0.65
(0.0255)
4.445 ± 0.127
(0.175 ± 0.005)
Dimensions
mm
(inches)
0.813 ± 0.102
(0.032 ± 0.004)
XAA117P
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
0 MIN / 0.102 MAX
(0 MIN / 0.004 MAX)
9.398 ± 0.127
(0.370 ± 0.005)
Pin 1
9.652 ± 0.381
(0.380 ± 0.015)
7.620 ± 0.254
(0.300 ± 0.010)
2.286 MAX.
(0.090 MAX.)
2.54
(0.10)
0.635 ± 0.127
(0.025 ± 0.005)
0.203 ± 0.013
(0.008 ± 0.0005)
8.70
(0.3425)
1.55
(0.0610)
0.65
(0.0255)
2.159 ± 0.025
(0.085 ± 0.001)
0.457 ± 0.076
(0.018 ± 0.003)
0.864 ± 0.120
(0.034 ± 0.004)
6
PCB Land Pattern
Dimensions
mm
(inches)
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
XAA117
XAA117STR Tape & Reel
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
W=16.00
(0.63)
Bo=10.30
(0.406)
K0 =4.90
(0.193)
Ao=10.30
(0.406)
K1 =4.20
(0.165)
Embossed Carrier
Embossment
P=12.00
(0.472)
User Direction of Feed
Dimensions
mm
(inches)
NOTES:
1. Dimensions carry tolerances of EIA Standard 481-2
2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
XAA117PTR Tape & Reel
2.00
(0.079)
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
Embossment
W = 16.00
(0.63)
7.50
(0.295)
Bo = 10.30
(0.406)
K0 = 2.70
(0.106)
K1 = 2.00
(0.079)
Embossed Carrier
4.00
(0.157)
Ao = 10.30
(0.406)
P = 12.00
(0.472)
User Direction of Feed
Dimensions
mm
(inches)
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
7
Specification: DS-XAA117-R03
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/22/2012