FEATURES PROFESSIONAL LED INDICATORS Ø6.35mm Mounting 662 SERIES PACK QUANTITY = 10 PIECES l Black anodised aluminium housing l Unique hexagonal bezel aids mounting l Hard anodised option to marine specifiecation l Sealed to IP67 l Suitable for high vibration applications l Short body length is ideal for portable equipment SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg STANDARD INTENSITY 01-662-303-04 Red Colour Diffused 2.0 20 100@10mA 625 -30 ~ +85 -40 ~ +85 Yes 01-662-309-04 Yellow Colour Diffused 2.1 20 30@10mA 590 -30 ~ +85 -40 ~ +85 Yes 01-662-312-04 Green Colour Diffused 2.2 20 50@10mA 565 -30 ~ +85 -40 ~ +85 Yes Vdc mA mcd nm °C °C UNITS Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown - Refer to the diagrams below. 303 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. We reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 024/08 Issue 2 312 BS EN ISO 9001:2000 Approved Manufacturer Page 1 of 2 662 Series MOUNTING HOLE Dimensions in mm (Typical) Anode termination indicated by long pin. Not to scale Mounting hole to be clean and burr free. MATERIALS PUSH-ON CONNECTORS Body Black Anodised Aluminium Nut Bright Nickel Plated Brass Panel Seal Viton Fresnel lens Polycarbonate Encapsulation PC5430 Resin Lock Washer Spring Steel 909-000-00 is gold plated. 910-000-00 is tin plated. For use with 662 series lamps. Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES 662 MAXIMUM MAXIMUM DISSIPATION VOLTAGE 75 3 mW Vdc POWER REVERSE PANEL NUT MINIMUM MIN/MAX. TORQUE CENTRES THICKNESS 6.35 0.6 x,y = 11.0 1.5-5.0 mm Nm mm mm CUTOUT MOUNTING MOUNTING PANEL OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY VOLTAGE WIRE WIRE COLOUR LENGTH 15 DC Products Red-anode / Black-cathode 150mm 19 DC Products Red-anode / Black-cathode 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 19/0.15mm 1.2mm OF OVER COMMENTS Customised lengths available The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. We reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 024/08 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 2