FEATURES PROFESSIONAL LED INDICATORS Ø25.4mm Mounting 672 SERIES PACK QUANTITY = 1 PIECE l Black anodised aluminium housing l Sealed to IP67 l Bi-Polar product fitted with a bridge rectifier for true AC/DC operation l Large LED indication l Specially designed mounting kit to allow 32mm mounting SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE AC/DC Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg HIGH INTENSITY 672-290-99 Red Colour Diffused UNITS 110 17 100 627 -40 ~ +85^ -40 ~ +85 Vac/dc mA mcd nm °C °C Yes Other voltages AC/DC available. Please contact our Technical sales. 290 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 014/07 Issue 1 SAMPLES AVAILABLE Page 1 of 2 672 Series Mounting Hole Dimensions in mm (Typical) Anode termination indicated by colour dot. Not to scale Mounting hole to be clean and burr free. MATERIALS MOUNTING KIT Body Black Anodised Aluminium Part number: 949-000-00 Nut Aluminium 32mm mounting kit and washer which increases the overall Panel Seal Neoprene Termination Tags Tin Plated Brass Lens Epoxy Encapsulation PC5430 resin Lock Washer Spring Washer mounting diameter of either 671 or 672 series. TECHNICAL CHARACTERISTICS SERIES MAXIMUM PANEL POWER CUTOUT DISSIPATION NUT MINIMUM MIN/MAX. TORQUE CENTRES THICKNESS MOUNTING MOUNTING PANEL 672 2500 25.4 1.2 x,y = 41.0 2.0-10.0 UNITS mW Vdc mm Nm mm PUSH-ON CONNECTORS 926-000-00 is brass tin plated, vinyl insulation. Dimensions in mm (Typical) For use with 672 series lamps. Not to scale website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 014/07 BS EN ISO 9001:2000 Approved Manufacturer Issue 1 Page 2 of 2