FEATURES PROFESSIONAL LED INDICATORS Ø8.1mm Mounting 614 SERIES Tri-colour PACK QUANTITY = 10 PIECES l Black anodised aluminium housing l Sealed to IP67 l Common anode version available l Colour coded flying lead terminations l Internal reverse protection diode fitted as standard in all voltage models. l This product is configured to work as a three colour option LED. Red, Green and Amber SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE LENGTH λp (nm) OPERATING STORAGE TEMP TEMP Topr Tstg TRI-COLOUR STANDARD INTENSITY 614-535-04-35 Red/Green Water Clear 2.0/2.2* 20/10 5/5 627/565 -40 ~ +85^ -40 ~ +85 Yes 614-535-20-35 Red/Green Water Clear 5/6 20/10 5/5 627/565 -40 ~ +85^ -40 ~ +85 Yes 614-535-21-35 Red/Green Water Clear 12 19/9 5/5 627/565 -40 ~ +85^ -40 ~ +85 Yes 614-535-22-35 Red/Green Water Clear 24 13/7 5/5 627/565 -40 ~ +85^ -40 ~ +85 Yes Vdc mA mcd nm °C °C UNITS Please note there are two LED die built into these units allowing the colour options as detailed above. Please contact our sales department for further details of other available options. * = Voltage DC for 20mA product if Vf@20mA, not Vopr. ^ = Products must be de-rated according to the derating information. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 072/07 Issue 2 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 1 of 2 614 Series MOUNTING HOLE Dimensions in mm (Typical) Red wire denotes red anode, green wire denotes green Not to scale anode. Centre wire is common cathode black. MATERIALS CIRCUIT DIAGRAM Body Black Anodised Aluminium Nut Bright Nickel Plated Brass Panel Seal Viton Lens Polycarbonate Encapsulation PC5430 Resin Lock Washer Spring Steel TECHNICAL CHARACTERISTICS SERIES MAXIMUM PANEL POWER CUTOUT DISSIPATION NUT MINIMUM MIN/MAX. TORQUE CENTRES THICKNESS MOUNTING MOUNTING PANEL 614 700 8.1 0.6 x,y = 14.5 1.5-13.0 UNITS mW Vdc Nm mm mm CONNECTION OPTIONS • Red LED option - Red wire termination anode • Green LED option - Green wire termination anode • Amber LED option - Red and Green wire termination anode • Black wire termination cathode website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 072/07 Issue 2 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 2