Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series 218 Series, 5×20 mm, Time-Lag Fuse RoHS Pb PS E Description 5×20mm Time-Lag glass body cartridge fuse designed to IEC specification. Features • Designed to International (IEC ) Standards for use globally • Meets the IEC 60127-2, Sheet 3 specification for Time-Lag fuses Agency Approvals Agency PS E Agency File Number Cartridge: NBK090205-E10480A NBK120802-E10480C Leaded: NBK090205-E10480B NBK120802-E10480D 2005010207145715 SU05001-3005 SU05001-2008 SU05001-2009 E10480 1A – 5A 6.3A – 15A Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. 1A – 5A 6.3A – 15A Additional Information 0.032A – 6.3A 0.032A – 0.040A 0.050A – 0.800A 1A – 10A 0.032A – 16A 0.032A-10A;15A 1402476 0.032A – 6.3A 40013496 0.032A – 10A 40016604 15A* N/A • RoHS compliant and lead-free Applications Ampere Range 29862 KM41462 • Available in cartridge and axial lead form Datasheet % of Ampere Rating 150% 210% 275% * Approval for Cartridge versions only 400% 1000% © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 07/27/15 Samples Electrical Characteristics 0.080A – 6.3A 0.032A – 16A Resources Ampere Rating Opening Time 0.032A–0.100A 60 minutes, Minimum 0.125A-6.3A 60 minutes, Minimum 8A-15A 30 minutes, Minimum 0.032A-0.100A 120 sec., Maximum 0.125A-6.3A 120 sec., Maximum 8A-16A 120 sec., Maximum 0.032A-0.100A 200 ms., Min.; 10 sec. Max. 0.125A-6.3A 600 ms., Min.; 10 sec. Max. 8A-16A 600 ms., Min.; 10 sec. Max. 0.032A-0.100A 40 ms., Min.; 3 sec. Max. 0.125A-6.3A 150 ms., Min.; 3 sec. Max. 8A-15A 150 ms., Min.; 3 sec. Max. 0.032A-0.100A 10 ms., Min.; 300 ms. Max. 0.125A-6.3A 20 ms., Min.; 300 ms. Max. 8A-15A 20 ms., Min.; 300 ms. Max. Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series Electrical Characteristics Nominal Cold Resistance (Ohms) Agency Approvals Maximum Maximum Power Nominal Voltage Drop at Rated Dissipation Melting Current At I2t (A2 sec) (mV) 1.5ln(W) Amp Code Amp Rating (A) Voltage Rating (V) .032 0.032 250 48.2580 0.01100 5000 1.6 x x x x x x .040 0.04 250 31.8620 0.01100 4000 1.6 x x x x x x x .050 0.05 250 21.2920 0.02700 3500 1.6 x x x x x x x .063 0.063 250 14.2680 0.04600 3000 1.6 .080 0.08 250 9.0700 0.07500 2500 1.6 Interrupting Rating PS E x x x x x x x x x x x x x x x x .100 0.1 250 6.0180 0.07900 2000 1.6 x x x x x x x x .125 0.125 250 4.2000 0.1465 1900 1.6 x x x x x x x x x .160 0.16 250 3.7000 0.14400 1500 1.6 x x x x x x x .200 0.2 250 1.6000 0.3410 1300 1.6 x x x x x x x x .250 0.25 250 1.0495 0.5405 1100 1.6 x x x x x x x x .315 0.315 250 0.8475 1.1100 1000 1.6 x x x x x x x x .400 0.4 250 0.5350 1.3250 900 1.6 x x x x x x x x 35 A @ 250 VAC .500 0.5 250 0.3700 2.8250 300 1.6 x x x x x x x x .630 0.63 250 0.2750 4.6750 250 1.6 x x x x x x x x .800 0.8 250 0.0813 3.370 150 1.6 x x x 001. 1 250 0.0613 6.730 150 1.6 x x x 1.25 1.25 250 0.0446 12.650 150 1.6 x x x x x x x x x 01.6 1.6 250 0.0336 23.350 150 1.6 x x x x x x x x x x x x x x x x x x x x 002. 2 250 0.0293 14.450 150 1.6 x x x x x x x x x 02.5 2.5 250 0.0219 23.250 120 1.6 x x x x x x x x x 3.15 3.15 250 0.0173 38.150 100 1.6 x x x x x x x x x 004. 4 250 40 A @ 250 VAC 0.0129 69.10 100 1.6 x x x x x x x x x 005. 5 250 50 A @ 250 VAC 0.0104 111.00 100 1.6 x x x x x x x x x 06.3 6.3 250 63 A @ 250 VAC 0.0076 198.50 100 1.6 x x x x x x x x x 008. 8 250 80 A @ 250 VAC 0.0059 341.50 100 4 x x x x x x x x x x 010. 10 250 100 A @ 250 VAC 0.0045 568.00 100 4 x x 12.5 12.5 250 63 A @ 250 VAC 0.0034 889.00 100 4 x x 015. 15 250 100 A @ 250 VAC 0.0028 1405.00 100 4 x x 016. 16 250 63 A @ 250 VAC 0.0021 1955.00 100 4 x x x x x* x * Approval for cartidge versions only Average Time Current Curves 0.032A 0.040A 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 8A 10A 12.5A 15A 16A Temperature Re-rating Curve 10000 1000 TIME IN SECONDS 100 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.01 0.1 1 10 100 CURRENT IN AMPERES © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/27/15 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds 40 Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Product Characteristics Material Body: Glass Cap: Nickel–plated Brass Leads: Tin–plated Copper Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202, Method 208 Product Marking Cap1:Brand logo, current and voltage ratings Cap2:Agency approval marks Packaging Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/ reel) © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/27/15 Operating Temperature –55ºC to +125ºC Thermal Shock MIL-STD-202, Method 107, Test Condition B (5 cycles, –65°C to +125°C) Vibration MIL-STD-202, Method 201 Humidity Salt Spray MIL-STD-202, Method 103, Test Condition A (High RH (95%) and elevated temperature (40°C) for 240 hours) MIL-STD-202, Method 101, Test Condition B Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series Dimensions Part Numbering System 0218 xxxx M X E P 20+0.5 0218 000P 5.2+0.1 -0.2 5.1+0.6 Series 5.1+0.6 Amp Code Refer to Amp Code column of Electrical Characteristics Table 0218.032 XEP to 0218.100XEP 40±1.0 5.6±0.4 21.5±1.0 Quantity Code M = 1000 0.65±0.05 Packaging Code X = Filler 0218.125 XEP to 0218016. XEP 40±1.0 Option Codes 5.5±0.3 21.5±1.0 Blank : Cartidge Type Fuse E : Axial Lead Fuse Lead-free 0.65±0.05* All dimensions in mm Notes: * Ratings above 6.3A have 0.8±0.05 diameter lead. Packaging Packaging Option 218 Series Bulk Bulk Reel and Tape Bulk Bulk Bulk Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A N/A EIA 296-E N/A N/A N/A 1000 1000 1000 1000 1000 100 MX MXE MRET1 MXG MXB HX N/A N/A T1=53mm (2.087”) N/A N/A N/A © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/27/15