Axial Lead & Cartridge Fuses 3.6 X 10 mm > Slo-Blo® Fuse > 875 Series 875 Series Fuse, Lead-free 3.6×10 mm, Slo-Blo® Fuse RoHS Pb Description Single Pigtail Axial Lead 3.6×10mm, Slo-Blo® Fuse Features Agency Approvals Agency • Designed to UL/CSA 248 Standard • Single Pigtail Axial Lead format •Slo-Blo® Fuse, ceramic body fuse in a compact package • Pb-free and RoHS Compliant • Available in ratings of 0.10 to 10 Amperes Applications Agency File Number Ampere Range E10480 0.100A - 10 A This space saving fuse is ideally suited for lighting, power supply, and adapter applications. Electrical Characteristics Additional Information Datasheet % of Ampere Rating Opening Time 100% 4 hours, Minimum 200% 60 seconds, Maximum Samples Resources Electrical Characteristics Amp Code Ampere Rating (A) Voltage Rating (V) .100 .125 .200 .250 .300 .400 .500 .600 .800 001. 01.5 01.6 002. 02.5 003. 004. 005. 006. 007. 008. 010. 0.100 0.125 0.200 0.250 0.300 0.400 0.500 0.600 0.800 1.00 1.50 1.60 2.00 2.50 3.00 4.00 5.00 6.00 7.00 8.00 10.00 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) 50A @ 250 VAC 3.000 2.060 0.921 0.6575 0.435 0.321 0.256 0.151 0.116 0.095 0.0519 0.0476 0.02887 0.02246 0.0171 0.0135 0.00954 0.00891 0.008 0.0077 0.00675 0.0023 0.0072 0.0086 0.038 0.043 0.136 0.288 0.611 0.919 1.503 4.33 5.08 8.45 17.85 42.85 42.45 60.90 72.30 106.80 134.59 208.00 Agency Approvals x x x x x x x x x x x x x x x x x x x x x Notes: Cold resistance measured at less than 10% of rated current at 23ºC. © 2015 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 05/12/15 Axial Lead & Cartridge Fuses 3.6 X 10 mm > Slo-Blo® Fuse > 875 Series 6A 7A 8A 10A .800A 1A 1.5A 1.6A 2A 2.5A 3A 4A 5A .500A .600A .200A .250A .300A .400A .125A Average Time Current Curves .100A Temperature Re-rating Curve 1000 100 TIME IN SECONDS 10 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 1 0.1 0.01 0.001 0 .1 1 10 100 100 0 CURRENT IN AMPS Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds 40 20 Time (Seconds) Cooling Time Preheat Time Dwell Time © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/12/15 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 20 Recommended Hand-Solder Parameters: 0 10 Temperature (°C) - Measured on bottom side of board 300 Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Axial Lead & Cartridge Fuses 3.6 X 10 mm > Slo-Blo® Fuse > 875 Series Product Characteristics Materials Body: Ceramic Cap: Nickel Plated Brass Tin Plated Copper Operating Temperature -55ºC to 125ºC Terminal Strength MIL-STD-202, Method 211, Test Condition A Thermal Shock MIL-STD-202, Method 107 Test Condition B3 (5 cycles -65ºC to +125ºC) Solderability MIL-STD-202, Method 208 Vibration MIL-STD-202, Method 201 (10-55 Hz) Product Marketing Body: Brand Logo, Current Rating Characteristic “T”, Agency approval marks Humidty MIL-STD-202, Method 106, High Humidity (90-98%RH), Heat (65ºC) Packaging Bulk (1000 pcs/pkg) Tape & Reel (1000 pcs/reel) Salt Spray MIL-STD-202, Method 101, Test Condition B Dimensions Part Numbering System 0875 xxxx M X E P Series Amp Code Refer to Amp Code column of Electrical Characteristics Table Quantity Code M = 1000 Packaging Code X = Filler Option Code E = Axial Leaded Lead-free P = Lead-Free Others = Special Options Please call Littelfuse for detail All dimensions in mm Packaging Packaging Option 875 Series Bulk Tape and Reel Packaging Specification Quantity Quantity & Packaging Code Taping Width Bulk EIA 296 1000 1000 MXE MRET1 N/A T1 = 52mm (2.062”) © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/12/15