ILU - 006 series Appearance Application LED Bulb(MR16,GU10,etc...) LED Down-light , Street Light, others ... Recommended LED CL-L251 series CL-L233 series Material : PMMA Outline Unit : [mm] Layout φ1(Type) Gate (under φ28) φ1(Cav.No.) CL-L251 A-A section < Attention in the handling > ・To fix the lens, the use of its flange with thickness of 2.5mm is recommended. ・The lens should be placed against the LED "CL-L251" as shown in the figure above. ・The specification is subject to change without notice. ・The prism shape is not accurate. ・Do not use this product under the temperature condition exceeding 85℃. CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P1806 02/12 ILU - 006 series Luminous intensity With CL-L251 (4W) Series Lens LED ILU-006-N ILU-006-M ILU-006-W FWHM 26[deg] FWHM 33[deg] FWHM 40[deg] CL-L251-MC4N1-C 350 [lm] 880 [cd] 540 [cd] 430 [cd] CL-L251-MC4W1-C 340 [lm] 860 [cd] 520 [cd] 410 [cd] CL-L251-MC4WW1-C 325 [lm] 820 [cd] 500 [cd] 400 [cd] CL-L251-MC4L1-C 310 [lm] 780 [cd] 480 [cd] 380 [cd] CL-L251-MC4L2-C 285 [lm] 720 [cd] 440 [cd] 350 [cd] CL-L251-C4N1-C 425 [lm] 1070 [cd] 650 [cd] 520 [cd] 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 Relative intensity Directivity -40 -30 -20 -10 ILU-006-N ILU-006-M ILU-006-W 0 10 20 30 40 Angle [degree] < Attention in the handling > ・To fix the lens, the use of its flange with thickness of 2.5mm is recommended. ・The lens should be placed against the LED “CL-L251” or “CL-L233” as shown in the figure above. ・The specification is subject to change without notice. ・Do not use this product under the temperature condition exceeding 85℃. CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P1806 02/12 ILU - 006 series Luminous intensity With CL-L251 (6W) Series Lens LED ILU-006-N ILU-006-M ILU-006-W FWHM 26[deg] FWHM 33[deg] FWHM 40[deg] CL-L251-MC6N1-C 490 [lm] 1110 [cd] 730 [cd] 610 [cd] CL-L251-MC6W1-C 485 [lm] 1100 [cd] 720 [cd] 600 [cd] CL-L251-MC6WW1-C 455 [lm] 1030 [cd] 680 [cd] 560 [cd] CL-L251-MC6L1-C 425 [lm] 960 [cd] 630 [cd] 530 [cd] CL-L251-MC6L2-C 390 [lm] 890 [cd] 580 [cd] 480 [cd] CL-L251-C6N1-C 625 [lm] 1420 [cd] 930 [cd] 770 [cd] Relative intensity Directivity 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 -40 -30 -20 -10 ILU-006-N ILU-006-M ILU-006-W 0 10 20 30 40 Angle [degree] < Attention in the handling > ・To fix the lens, the use of its flange with thickness of 2.5mm is recommended. ・The lens should be placed against the LED “CL-L251” or “CL-L233” as shown in the figure above. ・The specification is subject to change without notice. ・Do not use this product under the temperature condition exceeding 85℃. CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P1806 02/12 ILU - 006 series Luminous intensity With CL-L233 (13W) Series Lens LED ILU-006-N ILU-006-M ILU-006-W FWHM 35[deg] FWHM 41[deg] FWHM 45[deg] CL-L233-MC13N1-C 1110 [lm] 1580 [cd] 1220 [cd] 1030 [cd] CL-L233-MC13W1-C 1055 [lm] 1500 [cd] 1160 [cd] 980 [cd] CL-L233-MC13WW1-C 1005 [lm] 1430 [cd] 1100 [cd] 930 [cd] CL-L233-MC13L1-C 960 [lm] 1370 [cd] 1050 [cd] 890 [cd] CL-L233-MC13L2-C 885 [lm] 1260 [cd] 970 [cd] 820 [cd] CL-L233-C13N1-C 1410 [lm] 1990 [cd] 1540 [cd] 1300 [cd] Relative intensity Directivity 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 -40 -30 -20 -10 ILU-006-N ILU-006-M ILU-006-W 0 10 20 30 40 Angle [degree] < Attention in the handling > ・To fix the lens, the use of its flange with thickness of 2.5mm is recommended. ・The lens should be placed against the LED “CL-L251” or “CL-L233” as shown in the figure above. ・The specification is subject to change without notice. ・Do not use this product under the temperature condition exceeding 85℃. CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P1806 02/12 ILU - 006 series Physical properties Property Optical Light transmission Reflectiv Index Mechanical Tensile modulus Tensile strength at yield Nominal tensile strain at break Flexual modulus Flexual strength Charpy impact strength Izod impact strength Rockwell hardness Thermal Heat deflection temperature Vicat softening point Test Method Condition Unit ASTM D 1003 ASTM D 542 3.2mm ND@23℃ % --- 92 1.49 Max. ------- MPa MPa % MPa MPa 3100 70 6 3200 103 7.5 Noched (23℃) M scale kJ/m 2 --- 1.2 93 1820kPa (Rate A;1kg) (Rate A;5kg) ----- ℃ ℃ ℃ g/10min ×10 -5 102 111 104 3.7 Ω/sq Ωcm ----- ASTM D 405 ----60cycles 1,000,000cycles volts/mil 60cycles 1,000,000cycles --- ASTM D 792 ASTM D 570 UL94 ------- g/cm 3 % class ASTM ASTM ASTM ASTM ASTM ASTM ASTM ASTM D D D D D D D D 638 790 638 790 790 256 256 785 ASTM D 648 ASTM D 1525 Melt volume flow rate Coeffient of linear expansion Electrical Surface resistivity Volume resistivity ASTM D 1238 ASTM D 696 Specific Inductive capacity ASTM D 150 Dielectric strength ASTM D 149 Dielectric loss Factor ASTM D 150 Tracking resistance Other Density Water absorption Flammability ASTM D 257 ASTM D 257 seconds Value 5.8 1.00E+18 1.00E+18 3.7 2.2 500 0.19 0.007 no track 1.19 0.3 HB * Values reported are typical and should not be used for specification purpose. < Attention in the handling > ・ The data on this document is the characteristics combining ILU-006 and CL-L251, L233 series. ・ ILU-006 is the lens for CL-L251 and L233 series. ・ Discussion will be needed separately if you combine it with LEDs other than these. ・Do not use this product under the temperature condition exceeding 85℃. CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P1806 02/12