Customer's name： ． ． Specification No.：Ref.CE-P680 03/10 Specifications sheet for approval Product name： Parts L250-HOLDER No .： 914-A00680 Page No. item page 1 Drawing 2 Packing specification 3 Physical properties drawing No. AL2-041-02 Approval Signature CITIZEN ELECTRONICS CO.,LTD 1-23-1,Kami-Kurechi,Fujiyoshida-shi, Yamanashi-Ken 403-0001,JAPAN Tel：(0555)23-4121 Fax：(0555)24-2426 Sales department Approved Checked Drawn GQP-0013-F03-3 (SGP-0013-F05-0) 16.49 1.9 15 6. 9 gate 5 R2 2 0.5 90° R 3 .3 .9 .4 13 6. 7 13 43.9 max 0.2 2° 40° Remarks 1 This drawing for Citizen Electronics Co., LTD. : CL-L250 series only 2 Material: PC 3 Color: Black 4 The angle R without directions is set to 0.2. 5 No scratches, stain, etc allowes. 6 Dimension is based on as follows. 5 This drawing is the property of Citizen Electronics Co.,LTD. and should not be disclosed to any third party without prior permission of Citizen Electronics Co.,LTD. Φ 31.786 5 (Φ 31 ) LIMITS UNLESS OTHERWISE NOTE ★ L≦6 6＜L≦18 18＜L≦50 50＜L≦120 120＜L≦400 Angle ±0.05 ±0.08 ±0.1 ±0.18 ±0.28 ±0.1 ±0.2 ±0.2 ±0.3 ±0.3 ±0.5 ±0.45 ±0.8 ±0.7 ±1.2 ±1° ±0.3 ±0.5 ±1.0 ±1.5 ±2.0 6 5 4 3 2 1 09.12.03 Mark Date General tolerances refer leftward table refer leftward table Angles Alternation K.Matsuyama Drawn Checked K.Sasuga K.Funakubo Approved Unit Scale / mm 2 1 Dimensions full-fledged revision Description Appro. Symbol Name Part No. Drawin No. Date L250-HOLDER HOLDER 914-A00680 4L2-041-02 2009.07.14 CITIZEN ELECTRONICS Co.,ltd 書式No.GQP-0302-F04-1 (RQP-0302-F10-0,UQP-U302-F04-0) Ref.CE-P680 03/10 This drawing is the property of Citizen Electronics Co.,LTD. and should not be disclosed to any third party without prior permission of Citizen Electronics Co.,LTD. Holder stack 10 tray (Max) + empty tray as top cover Cardboard Tray Bag 100pcs./tray Max1000pcs./bag Label CITIZEN ELECTRONICS CO., LTD. Part Name L250-HOLDER Part No. 914-A00680 Cardboard Lot No. Quantity Date arbitrary size Label QC 7 6 5 4 3 2 1 Mark General tolerances Symbol Name Part No. Dimensions Angles Drawn Checked Approved Date Description Appro. Scale Alternation K.Matsuyama K.Sasuga K.Funakubo free / Unit L250-HOLDER packing specification Drawin No. Date mm 2010/01/13 CITIZEN ELECTRONICS Co.,ltd 書式No.GQP-0302-F04-1 (RQP-0302-F10-0,UQP-U302-F04-0) Ref.CE-P680 03/10 PHYSICAL PROPERTIES Property Test Method Condition Unit Mechanical Tensile strength at yield Tensile strength at break Tensile strain at yield Tensile strain at break Flexual modulus Flexual strength at yield Izot impact Rockwell hardness ASTM D 638 50mm/min ASTM D 638 50mm/min ASTM D 638 50mm/min ASTM D 638 50mm/min ASTM D 790 1.3mm/min, 50mm span ASTM D 790 1.3mm/min, 50mm span ASTM D 4812 unnoched ASTM D 256 noched ASTM D 785 M scale MPa MPa % % MPa MPa J/m J/m - 62 68 7 130 2340 96 3204 801 70 1.82MPa 0.45MPa B/50 300℃/1.2kgf ℃ ℃ ℃ g/10min 132 137 154 10.5 in air, 3.2mm 50/60Hz 1MHz 50/60Hz 1MHz Ωm kV/mm - >1017 14.9 3.17 2.96 0.0009 0.01 Thermal Heat deflection temperature 6.4mm, unannealed ASTM D 648 Vicat softening point Melt flow rate ASTM D 1525 ASTM D 1236 Electrical Volume resistivity Dielectric strength ASTM D 257 ASTM D 149 Relative permittivity ASTM D 150 Dissipation factor ASTM D 150 Other g/cm3 24h % Water absorption ASTM D 570 23℃/equilibrium % Flammability UL94 class *Values reported are typical and should not be used for specification purpose. Density ASTM D 792 1.19 0.15 0.35 HB Ref.CE-P680 03/10