Miniature Case BC2 Series Features: • • • • • • • • • Hand held case with battery compartment and battery clip / pocket clip option Moulded in high-impact black, white or grey ABS with integral PP3 battery - compartment accessible by a separate removable cover Clip-in battery terminals are supplied as standard Textured finish No visible fixing screws for excellent final product appearance The pocket clip, if required, can be easily fixed to the case by the two self-tapping screws supplied The two main halves of the case are held together by the two self-tapping screws supplied which are concealed by the battery cover Four integral location pegs and sockets will hold a PCB in place without any further fixing The overall finish of the case is matt with highlighted feature panels making it ideal for personalised products Dimensions : Millimetres www.element14.com www.farnell.com www.newark.com Page <1> 09/06/12 V1.1 Miniature Case BC2 Series Dimensions : Millimetres ABS Polymers Specification Acrylonitrile-Butadiene-Styrene Properties Test Method Unit Impact Resistant Grades 103 Izod Impact Strength +23°C -20°C ISO 180/3A ASTM D256/A kJ / m2 17 11 Tensile Strength at Yield ISO R527 ASTM D638 N / mm2 50 Elongation at Yield ISO R527 ASTM D638 % 6 Flexural Strength ISO 178 ASTM D790 N / mm2 87 Rockwell Hardness ISO 2039/2 ASTM D785 R Scale 112 Heat Deflection Temperature Unannealed Annealed ISO 75/A ASTM D648 °C 90 97 Vicat Softening Temperature ISO 306/B ASTM D1525 °C 97 www.element14.com www.farnell.com www.newark.com Page <2> 09/06/12 V1.1 Miniature Case BC2 Series Properties Test Method Impact Resistant Grades Unit 103 Density ISO R1183 ASTM D792/A kg / m3 1,050 Melt Flow Index ISO 1133 ASTM D1238 dg / min 13 Dimensions : Millimetres Specification Table Colour External Dimensions Length (L) Width (W) Height (H) Maximum PCB Size Black Grey (RAL9002) Part Number BC2 103 62 23 White 64 × 56 BC2LG BC2W Dimensions : Millimetres Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 09/06/12 V1.1