CLOCK OSCILLATORS “HS” series Wave Form and Load: 50 ohm True Sine Wave MERCURY Since 1973 Product Summary Package Code RoHS Compliant Product Package Size (mm) [inches] Assembly Technique Thru-Hole Types HS14 HS14G Full size 4 pin DIL 12.8 x 20.2 x 7.8 seat height [0.504 x 0.795 x 0.307] Surface Mount Types HS24 HS24G Gull wing version of HS14 12.8 x 20.2 x 8.8 seat height [0.504 x 0.795 x 0.346] General Specifications TA=+25°C, VDD= at specified voltage, Load: 50 ohms Input Voltage (VDD) Frequency Range Frequency Stability(1) Commercial (0°C to +70°C) Temperature code is ‘C” Industrial (-40°C to +85°C) Temperature code is ‘I” Output Power Level Output Power Tolerance Load Harmonics Current Consumption Option on pin 1 (limited frequencies only, check with Mercury for this option) Storage Temperature Aging 3.3 V System 5.0 V System VDD =+5.0 V D.C.±5% VDD = +3.3 V D.C. ±5% Voltage code is “3" Voltage code is "5" 10 MHz ~ 800 MHz 10 MHz ~ 156 MHz ±25 ppm over 0°C to +70°C (Stability code is “A”) ±50 ppm over 0°C to +70°C (Stability code is “B”) ±100 ppm over 0°C to +70°C (Stability code is “C”) If non-standard please enter the desired stability after “C”. For example “C20” represents ±20 ppm over 0 to +70°C ±25 ppm over -40°C to +85°C (Stability code is “D”) ±50 ppm over -40°C to +85°C (Stability code is “E”) ±100 ppm over -40°C to +85°C (Stability code is “F”) If non-standard please enter the desired stability after “I”. For example “I20” represents ±20 ppm over -40 to +85°C 0 to 7 dBm max. into 50 ohm load 0 to 13 dBm max. into 50 ohm load (user to specify, default is 3 dBm) (user to specify, default is 5 dBm) ±1 dB 50 ohms 2nd harmonic: < -20 dBc; 3rd harmonic: <-25 dBc (frequency dependent) 10 MHz: 9 mA typical 10 MHz: 18 mA typical 100 MHz: 18 mA typical 100 MHz: 34 mA typical 150 MHz: 19 mA typical 150 MHz: 36 mA typical Output is high impedance when "O" (≤0.8V) is applied to pin 1. Disable time is150 n sec max. Please add “T” after the stability code for this option. -50°C to +100°C ±5 ppm per year max. (1) Inclusive of 25°C tolerance, operating temperature range, ±10% input voltage variation, load change, aging, shock and vibration. MERCURY www.mercury-crystal.com Taiwan: TEL (886)-2-2695-7099, FAX (886)-2-2695-7473, e-mail: [email protected] U.S.A.: TEL (1)-909-466-0427, FAX (1)-909-466-0762, e-mail: [email protected] MERCURY Page 1 of 3 Date: Aug. 1, 2007 Rev. 1 CLOCK OSCILLATORS “HS” series Wave Form and Load: 50 ohm True Sine Wave MERCURY Since 1973 Part Number Format and Examples: Example: 3HS14G-B-125.000-7 Explanation: +3.3V HS series true sine wave XO, RoHS compliant, 125.000 MHz, frequency stability is ±50 ppm over 0°C to +70°C, +7 dBm±1 dB output " " ": user to specify " " " 3 HS 14 G — B — 125.000 — 7 dash dash s t q dash r n o p n: Voltage code: “3” for +3.3 V; o: HS product series, p: Package code, q; RoHS compliant product, leave blank if not required, r:Frequency stability code: “A” ~ “F” or custom. See table above. s: VCXO Frequency in MHz, t: Desired output level in dBm. 50 ohm Sine Wave Test Circuit: Oscilloscope 50 ohm coaxial 50 ohms Frequency counter Vcc 14 SUPPLY + VOLTAGE A V - Top view E/D 8 7 0.01 uF Output Wave Form: ground MERCURY Page 2 of 3 Date: Aug. 1, 2007 Rev. 1