TOROIDAL POWER INDUCTORS P11TJ3 SERIES • Toroidal power inductors with high current capacity • Low radiation • Low core loss • Low core saturation • Operating temperature range: -55°C to +105°C • Add -V for Vertical Mount or -H for Horizontal Mount after the part number • RoHS compliant product ELECTRICAL PARAMETERS @ 25°C Part Number Idc (A) P11TJ3- Inductance (μH) (±15%) Irms (A) DCR (Ω MAX) Dimension A (INCH) (Nom) 1R2-5.5 1.2 1R5-4.7 1.5 5.50 10 0.006 0.032 4.71 9.5 0.006 0.003 2R2-4.1 2R7-3.7 2.2 4.13 9.0 0.007 0.032 2.7 3.67 8.4 0.008 0.032 3R3-3.3 3.3 3.30 8.2 0.008 0.032 3R9-3 3.9 3.00 7.9 0.009 0.032 4R7-2.8 4.7 2.75 7.5 0.010 0.032 5R6-2.5 5.6 2.54 7.3 0.011 0.032 6R8-2.4 6.8 2.36 7.1 0.011 0.032 8R2-2.1 8.2 2.06 6.6 0.013 0.032 100-2 10 1.94 6.5 0.015 0.032 120-1.7 12 1.74 6.1 0.016 0.032 150-1.6 15 1.57 5.9 0.016 0.032 180-1.4 18 1.43 5.6 0.017 0.032 220-1.3 22 1.27 4.6 0.024 0.029 270-1.1 27 1.14 4.4 0.026 0.029 330-1 33 1.03 4.3 0.029 0.029 390-1 39 0.97 3.7 0.038 0.025 470-R9 47 0.87 3.5 0.043 0.025 560-R8 56 0.80 3.1 0.057 0.023 680-R7 68 0.73 3.0 0.063 0.023 820-R66 82 0.66 2.6 0.087 0.020 101-R6 100 0.60 2.4 0.097 0.020 121-R55 120 0.55 2.3 0.107 0.020 151-R5 150 0.49 1.9 0.146 0.018 Note: 1. Inductance measured: 10KHz, 0.1Vrms 2. Idc: 10% inductance drop typical from initial value at rated current 3. Irms: ΔT ≤ 30°C Temp Rise at rated current Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com [email protected] TOROIDAL POWER INDUCTORS P11TJ3 SERIES ELECTRICAL PARAMETERS @ 25°C Part Number Idc (A) Irms (A) DCR (Ω MAX) P11TJ3- Inductance (μH) (±15%) Dimension A (INCH) (Nom) 181-R45 180 0.45 1.8 0.164 0.018 221-R4 220 0.40 1.5 0.225 0.016 271-R37 270 0.37 1.4 0.250 0.016 331-R33 330 0.33 1.2 0.342 0.014 391-R3 390 0.30 1.1 0.378 0.014 471-R28 470 0.28 1.0 0.510 0.013 561-R25 560 0.25 0.9 0.565 0.013 681-R23 680 0.23 0.8 0.637 0.013 821-R21 820 0.21 0.7 0.849 0.013 102-R19 1000 0.19 0.7 0.951 0.011 122-R17 1200 0.17 0.6 1.298 0.011 152-R15 1500 0.15 0.5 1.476 0.010 Note: 1. Inductance measured: 10KHz, 0.1Vrms 2. Idc: 10% inductance drop typical from initial value at rated current 3. Irms: ΔT ≤ 30°C Temp Rise at rated current DIMENSIONS (inch) Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.008 .XXX : ±0.004 mm: X,X : ±0,20 X,XX : ±0,10 www.mpsind.com [email protected]