COMMON MODE CHOKE P53DM16 SERIES • Common mode choke with improved differential performance without sacrificing common mode performance • Dielectric withstanding voltage: 1500 Vrms (between windings) • Operating temperature range: 0°C to +70°C • Custom design available upon request • RoHS compliant product ELECTRICAL PARAMETERS @ 25°C Part Number Note: 1. 2. 3. 4. Rated Irms (A) Leakage Inductance 1-3 (shorted 2-4) (µH Min) DCR (Ω MAX) P53DM16- Inductance 1-3, 2-4 (mH Min) Dimension F (±0.005 inch) 402-6 4.0 5.0 40 0.026 0.046 502-5 5.0 4.5 60 0.032 0.046 702-4 7.0 4.0 80 0.052 0.040 103-3 10.0 3.0 100 0.072 0.036 Inductance and Leakage Inductance measured: 10KHz, 1Vrms Polarity: 1 and 2 are in phase Turns Ratio: 1:1 ±1% (1-3 to 2-4) ΔT of 35°C Temperature Rise at rated current DIMENSIONS (inch) Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 SCHEMATIC Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.008 .XXX : ±0.004 mm: X,X : ±0,20 X,XX : ±0,10 www.mpsind.com [email protected]