SBT01 1W DC-DC Unregulated Single Output Converter ¡ ¡½ E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡ E series Features : 1000VDC I/O isolation Internal SMD technology Protection: Short circuit Cooling by free air convection Non-conductive plastic case SMD package styles 100% full load burn-in test Low cost / High reliability Approved: UL / CUL 1 year warranty SPECIFICATION MODEL NO. B0505T-1W B1205T-1W B0509T-1W B1209T-1W B0512T-1W B1212T-1W B0515T-1W B1215T-1W ORDER NO. SBT01L-05 SBT01M-05 SBT01L-09 SBT01M-09 SBT01L-12 SBT01M-12 SBT01L-15 SBT01M-15 OUTPUT 9V DC OUTPUT VOLTAGE 5V OUTPUT CURRENT RANGE 0 ~ 200mA EFFICIENCY 70% RATED POWER 1W 12V 0 ~ 111mA 15V 0 ~ 84mA 0 ~ 67mA 74% 75% 74% 75% 75% 75% 10.8 ~ 13.2V 12V 4.5 ~ 5.5V 5V 10.8 ~ 13.2V 12V 4.5 ~ 5.5V 5V 10.8 ~ 13.2V 12V 4.5 ~ 5.5V 5V 10.8 ~ 13.2V 12V 120mA 292mA 120mA 292mA 120mA 292mA 120mA 15mA 29mA 15mA 29mA 15mA 29mA 15mA 72% RIPPLE & NOISE (max.) Note.2 100mVp-p LINE REGULATION Note.3 1.2% for 1% input variation LOAD REGULATION Note.4 8.0% VOLTAGE TOLERANCE ¡Ó Ó¡ Ó¡ 8.0% SWITCHING FREQUENCY(Typ.) 100KHz 4.5 ~ 5.5V 5V VOLTAGE RANGE NORMAL VOLTAGE INPUT CURRENT Full load 292mA No load 29mA PROTECTION Momentary OVERLOAD PROTECTION SHORT CIRCUIT ¢J (Refer to "Derating Curve") -40 ~ +85 20% ~ 90% RH non-condensing 12.7 1 2 3 4 6.00 4.13 0.5 2.54 Derating Curve Pin Configuration Reflow Soldering Curve Pin No. Output 1 2 3 4 5 6 7 8 -Vin +Vin NC -Vout +Vout NC NC NC Peak. Temp 260 10 sec. Max. 260 5 TOP VIEW 2.54 ¢J / 70% RH ¢J 500khrs min. MIL-HDBK-217F(25 ) 12.7*7.5*6.0mm or 0.50"*0.30"*0.24" inch (L*W*H) 0.25 100 ¢J 6 I/P-O/P:1KVDC I/P-O/P: 100M Ohms / 500VDC / 25 Temperature ( ) 7.50 7 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2 Unit: mm (inch) 7.62 8 ¢J ¡Ó0.03% / ¢J (0 ~ 50¢J) -40 ~ +105 , 10 ~ 95% RH 1.3g Mechanical Specification 11.2 MAX Protection type : Broken WORKING HUMIDITY WEIGHT 6.25 Protection type : Broken Momentary WORKING TEMP. ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE MTBF OTHERS DIMENSION NOTE Fuse recommended 80 LOAD (%) INPUT 200 ¢J ¢J 220 ¢J 90 sec. Max. (>220 ) 150 100 50 0 NC : Please DO NOT connect to other pins. -40 ¢J 0 25 50 70 85 100 Ta ( ¢J) Time(sec.) 1.All parameters are specified at normal input, rated load, 25 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. File Name: SBT01-SPEC 2013-03-15