MBRX0530 Surface Mount Schottky Rectifiers REVERSE VOLTAGE: 30 V CURRENT: 0.5 A SOD-123FL Features ◇ ◇ ◇ 0.10-0.30 2.8±0.1 0.6±0.25 Mechanical Data ◇ 1.0±0.2 1.9± 0.1 Low profile package For surface mouted applications Idear for automated placement Low power loss,high efficiency High temperature soldering: 250℃/10 seconds at terminals 1.4± 0.15 ◇ ◇ ◇ ◇ ◇ Cathode Band Top View Case:JEDEC SOD-123FL,molded plastic over passivated chip Polarity: Color band denotes cathode end Weight: 0.003 ounces, 0.01 gram Device marking code:B3 3.7±0.2 Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single hase,half wave,60Hz,resistive or inductive load.For capactive load,derate current by 20%. ABSOLUTE RATINGS Parameter Symbol Value UNITS Maximum repetitive peak reverse voltage VRRM 30 V Maximum working peak reverse voltage VRWM 30 V VR 30 V I(AV) 0.5 A IFSM 5.5 A Maximum DC blocking voltage Maximum average forword @TL=100℃ rectified current at rated V R Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load Maximum instantaneous @I F=0.1A,TJ=25℃ forward voltage I F=0.5A,TJ=25℃ Maximum DC reverse current at rated DC blocking voltage @Rated dc Voltage,T C=25℃ V R=15V,TC=25℃ VF IR 0.375 V 0.43 130 20 µA Typical thermal resistance junction to ambient (NOTE 1) RjθA 206 ℃/W Typical thermal resistance junction to lead RjθL 150 ℃/W Tj -55---+150 ℃ TSTG -55---+150 ℃ Operating temperature range Storage temperature range NOTES:1.inch square pad size (1 x 0.5 inch for each lead) on FR4 board. MBRX0530 Surface Mount Schottky Rectifiers Ratings AND Charactieristic Curves Resistive or Inductive Load 0.6 0.4 0.2 0 50 60 70 80 90 100 110 120 130 140 150 PEAK FORWARD SURGE CURRENT, (A) 0.8 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 6.0 8.3 Single Half Sine-Wave (JEDEC Method) at rated TL 5.0 4.0 3.0 2.0 1.0 0 1 10 100 LEAD TEMPERATURE, ( ℃ ) NUMBER OF CYCLES AT 60Hz FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 1 0.1 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 INSTANTANEOUS FORWARD VOLTAGE, (V) INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 1000 100 10 1 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)