LTCC High Temperature Inductors 0.20 x 0.20 (5 x 5 mm) NASCENTechnology, Inc. has developed a series of high temperature, RoHS compliant inductors using low temperature co-fired ceramic (LTCC) ferrite usable to 300°C that feature low profile, rugged packaging, and self shielding characteristics. See individual data sheets for part dimensions. Electrical Parameters at 25 °C unless otherwise noted Part No. † 85071 85068 85074 85072 85075 85069 85073 85076 85070 No Load † Inductance µH 3.7 9.7 12 15 32 37 38 71 87 100 mA Inductance µH 3.1 7.5 6.6 13 24 29 27 48 57 100 mA Tolerance 25 % 25% 25 % 25 % 25 % 25 % 25 % 25 % 25 % Nominal DC Resistance ohms 0.14 0.2 0.18 0.7 0.9 1 2 2.5 2.9 Rated †† Current mA - Tolerance for no load inductance is ±25 % Current will cause a 35 °C temperature rise over ambient (measured 20 to 55 °C) * Saturation Current is the current that results in a 35% decrease in inductance over the 100 mA Inductance. Thickness varies by part; the range is 0.032-0.100 in [0.8-2.54 mm] Saturation Current* mA 275 250 250 250 200 250 200 200 225 Approx Height mm 1.1 1.7 1.5 1.1 1.5 1.7 1.1 1.5 1.7 †† Ordering Information: Common termination options (please add option to the end of the part number when inquiring): -A1 Thick film AgPd with side terminations, solderable -B0 Leads, gold plated -C0 Thick film Au, Au wirebonding -D0 Au over Ni, solderable -D1 Au over Ni, Al wirebonding For more information, please contact [email protected] or call on +44 (0) 1603 788967