LTCC High Temperature Inductors 0.15 x 0.15 (3.8 x 3.8mm) NASCENTechnology, Inc. has developed a series of high temperature, RoHS compliant inductors using low temperature co-fired ceramic (LTCC) ferrite usable to 300°C that feature low profile, rugged packaging, and self shielding characteristics. See individual data sheets for part dimensions. Electrical Parameters at 25 °C unless otherwise noted Part No. † 85093 85092 85091 85078 85079 85080 No Load † Inductance µH 0.9 5.5 7 8.5 35 80 100 mA Inductance µH 0.9 4.7 6 7 26 50 100 mA Tolerance 25 % 25% 25 % 25 % 25% 25 % Nominal DC Resistance ohms 0.4 1 0.5 0.25 1.4 3.75 Rated †† Current mA - Tolerance for no load inductance is ±25 % Current will cause a 35 °C temperature rise over ambient (measured 20 to 55 °C) * Saturation Current is the current that results in a 35% decrease in inductance over the 100 mA Inductance. Thickness varies by part; the range is 0.032-0.100 in [0.8-2.54 mm] Saturation Current* mA 275 225 225 275 250 225 †† Ordering Information: Common termination options (please add option to the end of the part number when inquiring): -A1 Thick film AgPd with side terminations, solderable -B0 Leads, gold plated -C0 Thick film Au, Au wirebonding -D0 Au over Ni, solderable -D1 Au over Ni, Al wirebonding For more information, please contact [email protected] or call on +44 (0) 1603 788967