LTCC High Temperature Inductors 0.20 x 0.20 (5 x 5mm) Higher Isat Series NASCENTechnology, Inc. has developed a series of high temperature, RoHS compliant inductors using low temperature co-fired ceramic (LTCC) ferrite usable to 300°C that feature low profile, rugged packaging, and self shielding characteristics. See individual data sheets for part dimensions. Electrical Parameters at 25 °C unless otherwise noted Part No. † 85084 85085 85086 No Load † Inductance µH 4.9 21 49 100 mA Inductance µH 4.9 21 46 100 mA Tolerance 25 % 25% 25 % Nominal DC Resistance ohms 0.23 1.14 3 Rated †† Current mA - Tolerance for no load inductance is ±25 % Current will cause a 35 °C temperature rise over ambient (measured 20 to 55 °C) * Saturation Current is the current that results in a 35% decrease in inductance over the 100 mA Inductance. Thickness varies by part; the range is 0.032-0.100 in [0.8-2.54 mm] Part mass 0.6 to 1.2 g Saturation Current* mA 1000 550 400 †† Ordering Information: Common termination options (please add option to the end of the part number when inquiring): -A1 Thick film AgPd with side terminations, solderable -B0 Leads, gold plated -C0 Thick film Au, Au wirebonding -D0 Au over Ni, solderable -D1 Au over Ni, Al wirebonding For more information, please contact [email protected] or call on +44 (0) 1603 788967