MOSPEC GBJ25A THRU GBJ25M GLASS PASSIVATED BRIDGE SINGLE PHASE BRIDGE RECTIFIERS VOLTAGE 50 to 1000 Volts CURRENT 25 Amperes FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * High case dielectric strength of 2500 VRMS * Ideal for printed circuit boards * Glass passivated chip junction * High surge current capability * High temperature soldering guaranteed: 260 oC/10 seconds, 0.375 (9.5mm) lead length, 5lbs. (2.3Kg) tension MECHANICAL DATA * Case: Molded plastic body * Terminal: Plated leads solderable per MIL-STD-750, Method 2026 * Mounting Position: Any (Note 3) * Mounting Torque: 8 in-lbs max. Weight: 0.26 oz., 7.0g MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS * Rating at 25℃ ambient temperature unless otherwise specified * Single phase,half wave. 60Hz, resistive or inductive load. * For capacitive load derate current bh 20 % Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Symbo GBJ25A GBJ25B GBJ25D GBJ25G GBJ25J GBJ25K GBJ25M l VRRM 50 100 200 400 600 800 1000 VRWM VR RMS Reverse Voltage VR(RMS) Characteristic Average Rectifier Forward Current @ TC=98℃ @ TC=25℃ Non-Repetitive Peak Surge Current 8.3 ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage (per element) ( IF =12.5 Amp) Peak Reverse Current ( Rated DC Voltage, TC = 25℃) ( Rated DC Voltage, TC = 125℃) I2 t Rating for Fusing( t<8.3 ms) Maximum Thermal Resistance per leg Operating and Storage Temperature Range 35 70 140 280 420 560 Unit V 700 V (1) IF(AV) 25 3.5(2) A IFSM 350 A VFM 1.00 V IR 10 350 uA I2t Rθ jA Rθ jc 500 A2s 22 1.0(1) TJ , Tstg -65 to +150 (2) o C/W ℃ Note: NOTES: 1. Unit case mounted on Al plate heatsink 2. Unit mounted on P.C.B. without heatsink 3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw GBJ25A thru GBJ25M PC Board O Tj=25 C Pulse with =300 us CASE TEMPERATURE (℃) FORWARD VOLTAGE (Volts) FIG-3 PEAK FORWARD SURGE CURRENT FIG-4 TYPICAL JUNCTION CAPACITANCE O Tj=25 C O Tj=25 C F=1.0MHz JUNCTION CAPACITANCE (PF) PEAK FORWARD SURGE FIG-2 TYPICAL FORWARD CHARACTERISITICS NSTANTANEOUS FORWARD CURRENT (Amp.) Heatsink Mounting, TC CURRENT (Amp.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-1 FORWARD CURRENT DERATING CURVE Single Half-Sine Wave (JEDEC Method) REVERSE VOLTAGE (Volts) FIG-5 TYPICAL REVERSE CHARACTERISTICS Per leg FIG-6 TYPICAL TRANSIENT THERMAL IMPEDANCE INSTANTANEOUS CURRENT (uA) O TA=125 C O TA=25 C PERCENT RATED PEAK REVERSE VOLTAGE (%) TRANSIENT THERMAL IMPEDANCE (OC/W) NUMBER OF CYCLES AT 60 Hz T, HEATING TIME (sec)