Datamate Connectors Female Vertical PC Tail Guide Pin, 101Lok Datamate J-TEK 101Lok fixing gives secure, fast and simple mating; no special tooling required. Just a simple 101-degree turn is required to fix the connectors together. 101Lok style mates with male connectors shown on pages 53, 55, 57, 59 and 61. Guide pin style includes board mount fixing, and mates with male connectors with Jackscrews, shown on pages 52, 54, 56, 58, 60, 63 and 64. GUIDE PIN JACKSCREWS C B B Ø1.40 2.00 2.00 No. 1 contact 5.55 6.00 Ø0.65 min Ø2.20 min C 5.20 2.00 Recommended PC Board Pattern Tail Ø0.50 A M2 101LOK C Calculation A B + 12 B Total no. of contacts - 2 C B+7 B B No. 1 contact A 2.00 5.55 Tail Ø0.65 min 5.20 Ø4.20 min C Ø0.50 5.60 Relaxed 2.00 2.00 4.25 Locked Ø3.00 Recommended PC Board Pattern HOW TO ORDER Series code M80 - 4 TX XX XX FX JACKSCREW TYPE T1 3mm Tails T2 4.5mm Tails F3 Guide Pin FC 101Lok Finish 01 Gold + Tin/Lead total No. of contacts 05 Gold 04 to 50 42 Gold + Tin Even numbers only All dimensions in mm. www.harwin.com 39 Datamate Connectors Female Vertical Surface Mount Guide Pin, 101Lok DATAMATE J-TEK 101Lok fixing gives secure, fast and simple mating; no special tooling required. Just a simple 101-degree turn is required to fix the connectors together. 101Lok style mates with male connectors shown on pages 53, 55, 57, 59 and 61. Guide pin style includes Board Mount fixing, and mates with male connectors with Jackscrews, shown on pages 52, 54, 56, 58, 60, 63 and 64. GUIDE PIN JACKSCREWS C B C B 2.00 5.55 No. 1 contact Ø1.40 8.50 7.50 6.45 2.00 5.60 1.00 Ø2.20 min 2.00 Recommended PC Board Pattern Ø0.50 A Calculation M2 101LOK C B A B + 12 B Total no. of contacts - 2 C B+7 C B 5.55 No. 1 contact A 2.00 7.50 8.50 2.00 Ø0.50 5.20 Relaxed 2.00 5.60 3.85 Locked 1.00 Ø4.20 min Ø3.00 Recommended PC Board Pattern HOW TO ORDER M80 - 4S1 XX XX FX TYPE F3 Guide Pin FC 101Lok Finish Series code 01 Gold + Tin/Lead total No. of contacts 05 Gold 04 to 50 42 Gold + Tin Even numbers only All dimensions in mm. www.harwin.com 42 Datamate Connectors Female Crimp 101Lok, Guide Pin, Reverse Fix 101LOK Datamate J-TEK Extra Small Bore for 28 – 32 AWG. 101Lok fixing gives secure, fast and simple mating; no special tooling required. Just a simple 101-degree turn to fix the connectors together. 101Lok style mates with male connectors shown on pages 53, 55, 57, 59 and 61. Reverse fix includes board mount fixing, and mates with male connectors shown on page 62. Guide pin style includes Board Mount fixing, and mates with male connectors with Jackscrews, shown on pages 52, 54, 56, 58, 60, 63 and 64. GUIDE PIN, REVERSE FIX C C B B No. 1 contact 2.00 5.55 A 2.00 7.55 5.55 No. 1 contact Ø1.40 M2 A 6.00 7.55 5.95 Locked 7.46 Relaxed M2 Ø3.00 A B + 12 B Total no. of contacts - 2 C B+7 F8, F9 Jackscrews F3 Jackscrew Calculation Wire Stripping Details tools Recommended Crimp Tool – M22520/2-01 Positioner – T5747 Contact Insertion/Removal Tool – Z80-280 See pages 87 to 89 Large/Small Bore = Ø1.10 max Extra Small Bore = Ø0.75 max 2.00 nominal Instruction sheets available at www.harwin.com/downloads/instructions HOW TO ORDER M80 - 4 X1 XX XX FX Series code TYPE C1 Small Bore 24-28AWG D1 Large Bore 22AWG E1 Extra Small Bore 28-32AWG total No. of contacts 04 to 50 Even numbers only All dimensions in mm. www.harwin.com 47 JACKSCREW F3 Guide Pin F8 Reverse Fix (3.5mm Board Mount) F9 Reverse Fix (5mm Board Mount) FC 101Lok Finish 05 Gold 42 Gold + Tin Datamate Connectors Female Crimp Trio-Tek Crimp inspection window in housing. Mates with male connectors shown on pages 52 to 64. Contacts available separately, see page 51. Triangular contact design for automated assembly equipment. Ideal for volume applications. DATAMATE J-TEK Calculation WITH JACKSCREWS CC B B C CC BBB 2.00 2.00 2.00 2.00 2.00 No.1 No.1 No.1 contact contact No.1 contact contact No.1 contact 2.00 2.00 2.00 2.00 2.00 Hex Slotted M2 M2 M2 M2 M2 Hex Socket M2 M2 M2 M2 M2 Reverse Fix A B + 12 B Total no. of contacts - 2 C B+7 Guide Pin With Panel Mount Ø1.40 Ø1.40 Ø1.40 Ø1.40Ø1.40 11.05 11.05 11.05 11.0511.05 3.00 3.00 A/F A/F 3.00 3.00 A/F A/F 3.00 A/F 5.55 5.55 5.55 5.55 5.55 A A AAA without jackscrews CC BB 2.00 2.00 10.50 2.00 A/F A/F 2.00 2.00 2.00 A/F A/F 2.00 A/F Ø3.50 Ø3.50 Ø3.50 Ø3.50Ø3.50 M2 M2 M2 M2 M2 Ø4.00 Ø4.00 Ø4.00 Ø4.00Ø4.00 M2 M2 M2 M2 M2 Ø4.00 Ø4.00 Ø4.00 Ø4.00Ø4.00 Ø3.00 tools Recommended Hand Crimp Tool – Z80-255 Contact Removal Tool – Z80-258 See pages 87 to 89 2.00 2.00 Instruction sheets available at www.harwin.com/downloads/instructions No.1contact contact No.1 Wire Stripping Details 11.05 11.05 AA 3.00 2.50 Ø1.10 max 5.55 5.55 HOW TO ORDER M80 - 45X XX 98 FINISH Series code 98 Housings TYPE 454 Without Jackscrews 457 Reverse Fix Jackscrews 455 Hex Slotted Jackscrews 458 Guide pin with panel mount TOTAL No. OF CONTACTS 456 Hex Socket Jackscrews 459 101Lok Jackscrews 06, 08, 10, 12, 14, 20, 26, 34, 42, 50 All dimensions in mm. www.harwin.com 50 Datamate Connectors Female Crimp Contacts TRIO-TEK Wire Stripping Details 10.18 14.18 3.00 2.50 Ø1.10 max 10.18 Reeled Loose BARREL CRIMP Large Bore (22 AWG): 14.18 Extra Small Bore (28 – 32 AWG): 7.45 7.45 7.45 Small Bore (24 – 28 AWG): Extra Small Bore Ident Groove Wire Stripping Details Ø1.10 max (Ø0.75 max for Extra Small Bore) Small Bore Ident Groove Small Bore Ident Groove 2.00 nominal HOW TO ORDER M80 - XXX 00 XX Finish Series code TYPE 011 Barrel Crimp, Large Bore (22 AWG) 253 Trio-Tek Crimp 22-24 AWG, Reeled 013 Barrel Crimp, Small Bore (24-28 AWG) 254 Trio-Tek Crimp 26-28 AWG, Reeled 019 Barrel Crimp, Extra Small Bore (28-32 AWG) 283 Trio-Tek Crimp 22-24 AWG, Loose 284 Trio-Tek Crimp 26-28 AWG, Loose All dimensions in mm. www.harwin.com 51 01 Gold + Tin (M80-01x) 05 Gold (M80-01x) 42 Gold + Tin (M80-2xx) 45 Gold (M80-2xx) Datamate J-TEK Trio-Tek contacts must be ordered separately, see page 50 for applicable housings. Barrel Crimp contacts are supplied with the connectors (pages 44 to 49) – use the order codes below for extra crimps. For crimp and insertion tools, see pages 87 to 89. Datamate Connectors Male Vertical PC Tail 101Lok Calculation B 2.00 2.00 Ø0.65 min A B + 12 B Total no. of contacts - 2 C B+7 Ø2.20 min (for Board Mount) C Recommended PC Board Pattern 101LOK 101LOK WITH BOARD MOUNT C C B B 2.00 2.00 0.50 0.50 No. 1 contact 5.55 Ø0.50 2.00 A 5.55 No. 1 contact 5.60 5.60 2.00 Tail Tail Ø0.50 A M2 HOW TO ORDER M80 - 5 TX XX XX MX JACKSCREW Series code type T1 MC 101Lok ME 101Lok with Board Mount 3mm Tails Finish T2 4.5mm Tails 05 Gold total No. of contacts 22 Gold + Tin/Lead 04 to 50 42 Gold + Tin Even numbers only All dimensions in mm. www.harwin.com 53 Datamate J-TEK Mates with female connectors shown on pages 39, 42, 47 and 50. Polarised mouldings. Fully shrouded contacts. Jackscrews are assembled where specified. Choice of PC tail length. Board Mount provides PCB strain relief. Datamate Connectors Male Horizontal PC Tail 101Lok Calculation B 2.00 2.00 Ø0.65 min A B + 12 B Total no. of contacts - 2 C B+7 Ø2.20 min (for Board Mount) C Recommended PC Board Pattern 101LOK 101LOK WITH BOARD MOUNT No. No. 11 contact contact 2.00 2.00 Tail Tail 5.55 5.55 0.50 0.50 6.00 6.00 BB No. 1 contact 2.00 0.50 Tail B 2.00 2.00 CC 5.55 M2 C 5.60 6.00 5.60 5.60 Ø0.50 Ø 0.50 AA 2.00 2.00 Ø0.50 2.00 2.00 A HOW TO ORDER M80 - 5 LX XX XX MX JACKSCREW Series code type L1 3mm Tails L2 4.5mm Tails MC 101Lok MD 101Lok with Board Mount Finish 05 Gold total No. of contacts 22 Gold + Tin/Lead 04 to 50 42 Gold + Tin Even numbers only All dimensions in mm. www.harwin.com 55 Datamate J-TEK Mates with female connectors shown on pages 39, 42, 47 and 50. Jackscrews are assembled where specified. Choice of PC tail length. Board Mount provides PCB strain relief. Datamate Connectors Male Vertical Surface Mount 101Lok Calculation C B 2.00 A B + 12 B Total no. of contacts - 2 C B+7 8.50 2.00 ø 2.20 (for Board Mount) 1.00 Recommended PC Board Pattern 101LOK 101LOK WITH BOARD MOUNT C C B B 0.50 5.55 No. 1 contact 2.00 5.55 No. 1 contact 5.80 ø0.50 0.50 A 6.75 6.75 5.80 2.00 ø0.50 A M2 HOW TO ORDER M80 - 5 S1 XX XX MX JACKSCREW Series code type MC 101Lok ME 101Lok with 5mm Board Mount Finish S1 Vertical Surface Mount 05 Gold total No. of contacts 22 Gold + Tin/Lead 04 to 50 42 Gold + Tin Even numbers only All dimensions in mm. www.harwin.com 57 Datamate J-TEK Contact [email protected] for tape & reel options. Optional pick and place cap. Mates with female connectors shown on pages 39, 42, 47 and 50. Gull wing SMT tails simplify inspection process. Board Mount provides PCB strain relief. Datamate Connectors Male Horizontal Surface Mount 101Lok Calculation C 1.50 B 1.00 0.50 ø2.20 (for Board Mount) A B + 12 B Total no. of contacts - 2 C B+7 1.00 2.00 Recommended PC Board Pattern 101LOK 101LOK WITH BOARD MOUNT C C 5.55 No. 1 contact 0.50 A 5.55 No. 1 contact 5.60 5.60 0.65 M2 10.10 0.50 A 0.47 0.65 10.10 2.00 B 0.47 2.00 B HOW TO ORDER M80 - 5 S2 XX XX MX JACKSCREW Series code type MC 101Lok MD 101Lok with Board Mount Finish S2 Horizontal Surface Mount 05 Gold total No. of contacts 22 Gold + Tin/Lead 04 to 50 42 Gold + Tin Even numbers only All dimensions in mm. www.harwin.com 59 Datamate J-TEK Contact [email protected] for tape & reel options. Mates with female connectors shown on pages 39, 42, 47 and 50. Stamped contact ensures co-planarity. Board Mount provides PCB strain relief. Datamate Connectors Mates with female connectors shown on pages 39, 42, 47 and 50. Crimp contacts supplied loose. Crimp contacts are rear insertable and replaceable. Large Bore 22 AWG, Small Bore 24 – 28 AWG. Part numbers are for housings and the equivalent number of contacts. Spare contacts are available – see page 65. Calculation 101LOK C A B + 12 B Total no. of contacts - 2 C B+7 B 2.00 0.50 2.00 No. 1 contact 5.55 7.85 5.60 A tools Wire Stripping Details Recommended Crimp Tool – M22520/2-01 Positioner – Z80-193 Contact Insertion/Removal Tool – Z80-280 See pages 87 to 89 Ø1.10 max 2.00 nominal Instruction sheets available at www.harwin.com/downloads/instructions HOW TO ORDER M80 - 5 X1 XX 05 MC Series code type JACKSCREW C1 Small Bore 24-28 AWG D1 Large Bore 22 AWG MC total No. of contacts Finish 04 to 50 05 Even numbers only All dimensions in mm. www.harwin.com 101Lok 61 Gold Datamate J-TEK Male Crimp 101Lok Datamate Connectors Male Crimp Contacts Datamate J-TEK Crimp contacts are supplied with the connectors (pages 60 to 64) – use the order codes below for extra crimp contacts. For crimp and insertion tools, see pages 87 to 89. SPARE CRIMP CONTACT Large Bore (22 AWG): 3.50 4.15 4.10 Wire Stripping Details Ø1.10 max 3.50 2.00 nominal 4.15 4.10 Small Bore (24 – 28 AWG): Small Bore Ident Groove Small Bore Ident Groove HOW TO ORDER M80 - 19 X 00 XX Finish Series code 05 TYPE 4 Large Bore for J-Tek 5 Small Bore for J-Tek All dimensions in mm. www.harwin.com 65 Gold