Datamate Connectors Male Vertical Off-The-Shelf A selection of stocked Datamate Mix-Tek solder tail standard layouts. Choice to suit two PCB thicknesses and two stud lengths. Mates with connectors shown on page 79. Standard Power contacts rated to 20A, signal to 3A. High Power rated to 40A nominal, up to 80A max. DATAMATE MIX-TEK CALCULATION POWER CONTACTS ONLY A B 4.50 5.55 4.00 4.00 4.00 Jackscrew 0.50 C Ø1.50 Tail B+9 C B 4.50 4.00 3.00 Ø2.00 Ø2.00 Ø1.60 min for Standard Power Ø2.10 min for High Power Tail Tail Ø4.00 Ø2.20 x 2 for board mount Ø4.00 High Power Standard Power (No. of Power contacts - 1) x 4 C Stud Stud Jackscrew 3.00 B + 14 M2 (all threads) M2 (all threads) Jackscrew with Board Mount 5.60 Jackscrew with Board Mount A B Recommended PC Board Pattern HOW TO ORDER Refer to pages 77, 77a for stocked sizes M80 - 5000000 XX - XX - XXX - 00 - 000 JACKSCREW POWER CONTACT PART NO. M1 Jackscrew only M2 With 3.5mm Board Mount stud M3 With 5mm Board Mount stud 331 3.5mm Tail Standard Power NO. OF POWER CONTACTS 332 5 mm Tail Standard Power 02, 04, 06, 08, 10 PM1 3.5 mm Tail High Power CALCULATION SIGNAL AND POWER CONTACTS A B 2.00 2.00 4.50 4.00 A B + 13 B (No. of Power contacts - 1) x 4+ Total no. of Signal contacts +1 C B+8 5.55 3.00 C 0.50 M2 (all threads) Jackscrew with Board Mount 5.60 C B 1.00 2.00 Stud Jackscrew Ø0.50 Ø1.50 3.00 Ø1.60 x No. of Power Contacts Ø0.65 x Total No. of Signal Contacts Ø2.20 x 2 (for Board Mount) 2.00 Tail Ø4.00 4.50 4.00 3.00 Recommended PC Board Pattern HOW TO ORDER M80 - 5T1 XX 05 XX - XX - 331 - 00 - 000 JACKSCREW Refer to page 77 for stocked sizes. NO. OF SIGNAL CONTACTS M1 Jackscrew only NO. OF POWER CONTACTS 02, 04, 06, 08, 12 M2 With 3.5mm Board Mount stud 02, 04 All dimensions in mm. www.harwin.com 80