Series H13, H31 & H51 High pressure level switches ® REPLACEMENT PARTS ,,,,,,,,,, ,,,,,,,,,, ,,,,,,,,,, ,,,,,, ,,,,,, N° Replacement assemblies ① Description H13 1 , ,, , ,,,, ,, ,, ,, 5 3 See bulletin 42-780 for 2 Housing base replacement housings. 3 Switch mechanism See bulletin for switch mechanism furnished (listed below). 4 4 7 Attraction sleeve Mat. code 1 032-4203-004 004-5411-002 ② Mat. code 4 032-4511-201 004-5411-003 5 Jam nuts (4 pieces) 6 Guide washer (2 pieces) 010-3351-006 – 7 Encl. NEMA 4X & Mat. code 1 032-6346-804 Consult tube NEMA 7/9 Magnetrol. 8 10 1" NPT (or socket weld) H51 Housing cover 6 2 H31 1 010-2107-001 Mat. code 4 032-6346-805 BASEEFA & Mat. code 1 032-6344-004 CENELEC 032-6344-003 Mat. code 4 8 E-tube gasket 8 Chamber E-tube gasket Consult Magnetrol for: 9 kit Displacer assy. (1) side outlet chamber, or, assy. ③ Chamber assy. (2) side outlet chamber. 10 012-1204-001 9 Optional: 1" NPT (or socket weld – see note ④) 1" NPT (or socket weld) Switch mechanism Series type Bulletin n° – mercury switches A 42-783 – anti-vibration mercury switches E – dry contact switches – hermetically sealed switches B, C, D, U, W, X HS 42-794 – bleed type pneumatic switches J 42-685 – non-bleed type pneumatic switches K 42-686 NOTES: ① Replacement assemblies listed are furnished in Kit form only for standard base models with reference series A, B, C, D, E, J, U, W, X & K switch mechanisms. Consult factory or local representative for ordering assistance on all special model replacement parts. ② Sheathed attraction sleeve used on models specified for corrosive service. Standard sleeve is type 400 series SST. ③ Chamber kits include displacer assembly, inconel support spring, and attraction stem assembled within the welded float chamber. ④ Chamber assemblies furnished with optional second side outlet shown are included in listing below. Additional connections options, not covered in this bulletin, include special socket weld and raised face flanges. IMPORTANT: When ordering, please specify: a. Model and serial number of control. b. Name and number of replacement assembly. IMPORTANT SERVICE POLICY Owners of Magnetrol products may request the return of a control; or, any part of a control for complete rebuilding or replacement. They will be rebuilt or replaced promptly. Magnetrol International will repair or replace the control, at no cost to the purchaser, (or owner) other than transportation cost if: a. Returned within the warranty period; and, b. The factory inspection finds the cause of the malfunction to be defective material or workmanship. If the trouble is the result of conditions beyond our control; or, is NOT covered by the warranty, there will be charges for labour and the parts required to rebuild or replace the equipment. In some cases, it may be expedient to ship replacement parts; or, in extreme cases a complete new control, to replace the original equipment before it is returned. If this is desired, notify the factory of both the model and serial numbers of the control to be replaced. In such cases, credit for the materials returned, will be determined on the basis of the applicability of our warranty. No claims for misapplication, labour, direct or consequential damage will be allowed. RETURNED MATERIAL PROCEDURE So that we may efficiently process any materials that are returned, it is essential that a “Return Material Authorisation” (RMA) form will be obtained from the factory. It is mandatory that this form will be attached to each material returned. This form is available through Magnetrol’s local representative or by contacting the factory. Please supply the following information: 1. 2. 3. 4. 5. 6. Purchaser Name Description of Material Serial Number Desired Action Reason for Return Process details All shipments returned to the factory must be by prepaid transportation. Magnetrol will not accept collect shipments. All replacements will be shipped FOB factory. BULLETIN N°: EFFECTIVE: SUPERSEDES: UNDER RESERVE OF MODIFICATIONS BELGIUM ® DEUTSCHLAND FRANCE ITALIA UNITED KINGDOM INDIA BE 46-717.7 JANUARY 1997 May 1995 Heikensstraat 6, 9240 Zele Tel. (052) 45.11.11 Fax (052) 45.09.93 Schloßstraße 76, D-51429 Bergisch Gladbach-Bensberg Tel. (02204) 9536-0 Fax (02204) 9536-53 11, Rue A. Einstein, Espace Descartes, 77420 Champs-sur-Marne adresse postale: 77436 Marne-la-Vallée Cédex 2 Tel. (0) 164.68.58.28 Fax (0) 164.68.58.27 Via Arese 12, I-20159 Milano Tel. (02) 607.22.98 (R.A.) Fax (02) 668.66.52 Unit 1 Regent Business Centre Jubilee Road Burgess Hill West Sussex RH 15 9TL Tel. (01444) 871313 Fax (01444) 871317 B4/115 Safdurjung Enclave, New Delhi 110 029 Tel. 91 (11) 6186211 Fax 91 (11) 6186418