GBPC50GBPC50W Naina Semiconductor Ltd. Glass Passivated Single-Phase Bridge Rectifier, 50A Features • • • • • • Glass passivated chip junction Low reverse leakage current High surge current capability Low power loss High efficiency Electrically isolated metal case for maximum heat dissipation Mechanical Data • • • • • • Case: Molded plastic body with heatsink Terminals: Plated lead Solderable (Add “W” suffix for Wire Leads) Polarity: As marked on Case Mounting: Through hole for #10 Screw Mounting Torque: 20 in-lbs max. Weight: 18 grams (approx) Maximum Ratings & Electrical Characteristics (TA = 250C unless otherwise noted) Parameter Symbol VRRM VRMS VDC IO Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Average rectified output current GBPC50(W) 04 06 005 01 02 50 100 200 400 35 70 140 50 100 200 Units 08 10 12 600 800 1000 1200 V 280 420 560 700 840 V 400 600 800 1000 1200 V 50 A Non-repetitive peak forward surge current, single half sine-wave superimposed on rated load (JEDEC method) IFSM 450 A DC forward voltage drop per element @ 25A VF 1.1 V Peak reverse current at rated DC blocking voltage IR 10 µA CJ RθJ-C VISO TJ, TSTG 400 Typical junction capacitance (Note 1) Typical thermal resistance (Note 2) RMS isolation voltage Operating and Storage temperature o TC = 25 C 1.0 pF o 2500 -55 to +150 NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. (2) Thermal resistance from Junction to Case per leg 1 D-95, Sector 63, Noida – 201301, India • Tel: 0120-4205450 • Fax: 0120-4273653 [email protected] • www.nainasemi.com C/W V o C Naina Semiconductor Ltd. GBPC50GBPC50W Package Outline GBPC (in millimeters) GBPC-W (in millimeters) Ordering Table GBPC 1 50 2 12 W 3 4 1 – Single-Phase Bridge 2 – Current rating = IO 3 – Voltage Code (005, 01, 02, 04, 06, 08, 10, 12) 4 – None = GBPC (with Terminal Leads) W = GBPC-W (with Wire Leads) 2 D-95, Sector 63, Noida – 201301, India • Tel: 0120-4205450 • Fax: 0120-4273653 [email protected] • www.nainasemi.com