Surface Mount Aluminum Electrolytic Capacitors FEATURES • • • • • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING REDUCED CASE SIZE (SMALLER THEN NAZT) LOW ESR & HIGH RIPPLE CURRENT AT 100KHz LOAD LIFE (2,000 HOURS @ +105°C) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING • MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage Rating Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Miuntes @ 20°C Dissipation Factor Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test @ 105°C 2,000 hours 6.3 ~ 50Vdc 10 ~ 1,800μF -55 ~ +105°C ±20% (M) 0.01CV or 3μA whichever is greater W.V. (Vdc) S.V. (Vdc) Tan δ @ 120Hz/20°C W.V. (Vdc) Z-25°C/Z+20°C Z-40°C/Z+20°C Z-55°C/Z+20°C Capacitance Change Tan δ Leakage Current 22 220 33 330 47 470 68 680 100 101 150 151 220 221 330 331 390 470 560 680 820 1000 1200 1500 1800 391 471 561 681 821 102 122 152 182 SAC Alloy Compatible 235°C ~ 260°C RoHS Compliant includes all homogeneous materials *See Part Number System for Details LOW ESR COMPONENT LIQUID ELECTROLYTE For Performance Data see www.LowESR.com 6.3 8.0 0.26 6.3 2 3 4 10 16 25 35 50 13 20 32 44 63 0.19 0.16 0.14 0.12 0.10 10 16 25 35 50 2 2 2 2 2 3 3 3 3 3 4 4 3 3 3 Within ±30% of initial measured value Less than ±200% of the specified maximum value Less than the specified maximum value PART NUMBER SYSTEM STANDARD VALUES AND CASE SIZES (mm) Cap. Code (µF) 10 100 Working Voltage (Vdc) 6.3 10 16 25 35 50 4x6.1 4x6.1 4x6.1 4x6.1 4x6.1 4x6.1 5x6.1 5x6.1 5x6.1 4x6.1 5x6.1 6.3x6.1 5x6.1 6.3x6.1 4x6.1 5x6.1 6.3x6.1 6.3x6.1 5x6.1 6.3x6.1 6.3x6.1 6.3x6.1 6.3x8 5x6.1 6.3x6.1 6.3x8 6.3x8 8x10.5 6.3x6.1 6.3x8 8x6.5 8x10.5 6.3x6.1 6.3x8 8x10.5 8x10.5 6.3x8 6.3x8 6.3x6.1 8x10.5 8x10.5 10x10.5 8x6.5 8x6.5 6.3x8 8x10.5 8x10.5 8x10.5 10x10.5 10x14 8x6.5 10x10.5 8x10.5 8x10.5 8x10.5 10x10.5 10x14 10x10.5 8x10.5 10x10.5 10x14 10x10.5 8x10.5 10x10.5 10x14 10x10.5 10x10.5 10x14 10x10.5 - NAZJ 471 M 16V 8x10.5 N LB W Y F Series *Wide terminations available on 8mm & 10mm diameter parts. See page 4 for details. Optional: Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site PEAK REFLOW TERMINATION FINISH & TEMPERATURE CODES PACKAGING OPTIONS CODES Peak Reflow Temperature N 260°C* *Special conditions on page 3. Code Finish & Reel Size B Sn-Bi Finish & 13" Reel LB Sn-Bi Finish & 15" Reel *See part number standard values table for appropriate code Code + Dφ Case Size φD±0.5 L max. A±0.2 B±0.2 I±0.3 W P±0.3 4x6.1 4.0 6.1 4.3 4.3 1.8 0.50~0.80 1.0 5x6.1 5.0 6.1 5.3 5.3 2.2 0.50~0.80 1.5 6.3x6.1 6.3 6.1 6.6 6.6 2.6 0.50~0.80 1.8 6.3X8 6.3 8.0 6.6 6.6 2.6 0.50~0.80 1.8 8x6.5 8.0 6.5 8.3 8.3 3.4 0.50~0.80 2.2 8x10.5 8.0 10.5 8.3 8.3 3.1 0.7~1.1 3.1 10x10.5 10.0 10.5 10.3 10.3 3.2 0.7~1.4 4.6 10x14 10.0 14.0 10.3 10.3 3.2 0.7~1.4 4.6 NIC COMPONENTS CORP. www.niccomp.com RoHS Compliant Optional Wide Terminations* Termination/Packaging Code Reflow Temperature Code Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10µF DIMENSIONS (mm) 1 NAZJ Series www.lowESR.com I I - W 0.3mm max. A L P B www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors NAZJ Series STANDARD VALUES, CASE SIZES AND SPECIFICATIONS Cap. W.V. Dissipaton Factor (μF) (Vdc) (Tan δ) NAZJ220M6.3V4X6.1NBF 22 0.26 NAZJ470M6.3V4X6.1NBF 47 0.26 NAZJ470M6.3V5X6.1NBF 47 0.26 NAZJ101M6.3V5X6.1NBF 100 0.26 NAZJ101M6.3V6.3X6.1NLBF 100 0.26 NAZJ221M6.3V6.3X6.1NLBF 220 0.26 6.3 NAZJ331M6.3V6.3X8NLBF 330 0.26 NAZJ331M6.3V8X6.5NBF 330 0.26 NAZJ471M6.3V8X10.5NLBF 470 0.26 NAZJ102M6.3V8X10.5NLBF 1000 0.26 NAZJ152M6.3V10X10.5NLBF 1500 0.26 NAZJ182M6.3V10X10.5NLBF 1800 0.26 NAZJ220M10V4X6.1NBF 22 0.19 NAZJ330M10V4X6.1NBF 33 0.19 NAZJ330M10V5X6.1NBF 33 0.19 NAZJ151M10V6.3X6.1NLBF 150 0.19 NAZJ221M10V6.3X8NLBF 220 0.19 NAZJ221M10V8X6.5NBF 220 0.19 10 NAZJ331M10V8X10.5NLBF 330 0.19 NAZJ471M10V8X10.5NLBF 470 0.19 NAZJ681M10V8X10.5NLBF 680 0.19 NAZJ102M10V10X10.5NLBF 1000 0.19 NAZJ122M10V10X10.5NLBF 1200 0.19 NAZJ152M10V10X14NLBF 1500 0.19 NAZJ100M16V4X6.1NBF 10 0.16 NAZJ220M16V4X6.1NBF 22 0.16 NAZJ220M16V5X6.1NBF 22 0.16 NAZJ470M16V5X6.1NBF 47 0.16 NAZJ470M16V6.3X6.1NLBF 47 0.16 NAZJ680M16V6.3X6.1NLBF 68 0.16 NAZJ101M16V6.3X6.1NLBF 100 0.16 NAZJ101M16V6.3X8NLBF 100 0.16 16 NAZJ151M16V6.3X8NLBF 150 0.16 NAZJ221M16V6.3X8NLBF 220 0.16 NAZJ221M16V8X6.5NBF 220 0.16 NAZJ331M16V8X10.5NLBF 330 0.16 NAZJ471M16V8X10.5NLBF 470 0.16 NAZJ681M16V10X10.5NLBF 680 0.16 NAZJ821M16V10X10.5NLBF 820 0.16 NAZJ102M16V10X14NLBF 1000 0.16 NAZJ100M25V4X6.1NBF 10 0.14 NAZJ220M25V5X6.1NBF 22 0.14 NAZJ330M25V5X6.1NBF 33 0.14 NAZJ330M25V6.3X6.1NLBF 33 0.14 NAZJ470M25V6.3X6.1NLBF 47 0.14 NAZJ680M25V6.3X6.1NLBF 68 0.14 NAZJ101M25V6.3X8NLBF 100 0.14 25 NAZJ101M25V8X6.5NBF 100 0.14 NAZJ151M25V8X10.5NLBF 150 0.14 NAZJ221M25V8X10.5NLBF 220 0.14 NAZJ331M25V8X10.5NLBF 330 0.14 NAZJ471M25V10X10.5NLBF 470 0.14 NAZJ561M25V10X10.5NLBF 560 0.14 NAZJ681M25V10X14NLBF 680 0.14 NAZJ100M35V4X6.1NBF 10 0.12 NAZJ220M35V5X6.1NBF 22 0.12 NAZJ330M35V6.3X6.1NLBF 33 35 0.12 NAZJ470M35V6.3X6.1NLBF 47 0.12 NAZJ680M35V6.3X8NLBF 68 0.12 *Denotes Lower Reflow Temperature Rated, Lower Cost Alternative NIC Part Number 2 NIC COMPONENTS CORP. www.niccomp.com Max. ESR (Ω) 100KHz, +20°C 0.85 0.85 0.36 0.36 0.26 0.26 0.16 0.18 0.08 0.08 0.06 0.08 0.85 0.85 0.36 0.26 0.16 0.18 0.08 0.08 0.08 0.06 0.08 0.06 0.85 0.85 0.36 0.36 0.26 0.26 0.26 0.16 0.16 0.16 0.18 0.08 0.08 0.06 0.08 0.06 0.85 0.36 0.36 0.26 0.26 0.26 0.16 0.18 0.08 0.08 0.08 0.06 0.08 0.06 0.85 0.36 0.26 0.26 0.16 www.lowESR.com Max. Ripple Current (mA) +105°C, 100KHz 160 160 240 240 300 300 600 500 850 850 1190 850 160 160 240 300 600 500 850 850 850 1190 850 1190 160 160 240 240 300 300 300 600 600 600 500 850 850 1190 850 1190 160 240 240 300 300 300 600 500 850 850 850 1190 850 1190 160 240 300 300 600 www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE Load Life Hours @ +105°C 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors NAZJ Series STANDARD VALUES, CASE SIZES AND SPECIFICATIONS Cap. W.V. Dissipaton Factor (μF) (Vdc) (Tan δ) NAZJ101M35V6.3X8NLBF 100 0.12 NAZJ101M35V8X10.5NLBF 100 0.12 NAZJ151M35V8X10.5NLBF 150 0.12 NAZJ221M35V8X10.5NLBF 220 35 0.12 NAZJ331M35V10X10.5NLBF 330 0.12 NAZJ391M35V10X10.5NLBF 390 0.12 NAZJ471M35V10X14NLBF 470 0.12 NAZJ101M50V8X10.5NLBF 100 0.10 NAZJ221M50V10X10.5NLBF 220 50 0.10 NAZJ331M50V10X14NLBF 330 0.10 *Denotes Lower Reflow Temperature Rated, Lower Cost Alternative Max. ESR (Ω) 100KHz, +20°C 0.16 0.08 0.08 0.08 0.06 0.08 0.06 0.18 0.12 0.10 NIC Part Number 120Hz 0.65 0.75 1KHz 0.85 0.90 10KHz 0.95 0.95 Load Life Hours @ +105°C 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 RIPPLE CURRENT FREQUENCY CORRECTION FACTOR (ALTERNATIVE PART) RIPPLE CURRENT FREQUENCY CORRECTION FACTOR (STANDARD) Frequency 10 ~ 470μF 560 ~ 1800μF Max. Ripple Current (mA) +105°C, 100KHz 600 850 850 850 1190 850 1190 670 900 900 100KHz ~ 1.00 1.00 Frequency 100 ~ 150μF 220 ~ 1800μF 120Hz 0.50 0.60 1KHz 0.80 0.85 10KHz 0.95 0.95 100KHz ~ 1.00 1.00 PEAK REFLOW TEMPERATURE, DURATION AND NUMBER OF REFLOW PASSES ALLOWED Reflow Peak Time above Time above Time above Duration Number of Reflow Passes Code Temperature 200°C 217°C 230°C Time > 250°C 5 sec. 70 sec. 40 sec. 30 sec. 2 N +260°C 4 ~ 6.3mm φ N +255°C Time > 250°C 10 sec. 70 sec. 40 sec. 30 sec. 2 N +260°C Time > 250°C 5 sec. 70 sec. 40 sec. 30 sec. 1 only 8 ~ 10mm φ (see note 1) N +245°C Time > 240°C 10 sec. 70 sec. 40 sec. 30 sec. 2 1. Only one (1) reflow pass is allowed for 8mm and 10mm diameter parts if the peak reflow temperature is +260°C. 2. In situations where two reflow passes is allowed the second reflow shall be at least one hour after natural cool to room temperature has occurred. RECOMMENDED LAND PATTERN DIMENSIONS (mm) Case Size 4x6.1 5x6.1 6x3x6.1 6.3x8 8x6.5 8x10.5 10x10.5 10x14 a 1.0 1.5 b 2.6 3.0 c 1.6 1.6 1.8 3.5 1.8 2.2 2.8 4.5 4.1 2.2 2.2 4.3 4.4 2.5 a c b Temperature - Deg. C Diameter Peak Temperature (see table) 230 Time Above 230°C (see table) 200 Time Above 217°C (see table) 150 100 Preheat - 120 seconds max. (150°C ~ 180°C) Time Above 200°C (see table) 50 Time (Seconds) Review & Compare Reflow Soldering Heat Limits V-chip SMT Aluminum Electrolytic Capacitors www.niccomp.com/RSL PRECAUTIONS Please review the notes on correct use, safety and precautions found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] 3 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors NAZJ Series WIDE TERMINATION (WT) DIM. (mm) Case Size 8x6.5 8x10.5 10x10.5 10x14 Dφ ± 0.5 8.0 8.0 10.0 10.0 L max. 6.8 11.2 11.2 14.5 A, B ± 0.2 C max. 8.3 9.5 8.3 10.0 10.3 12.0 10.3 12.0 P ref. I ref. (2.2) 3.4 (3.1) 3.4 (4.6) 3.5 (4.6) 3.5 W R ± 0.2 0.6 ~ 0.8 0.7 0.7 ~ 1.4 0.7 1.0 ~ 1.4 0.7 1.0 ~ 1.4 0.7 C T ± 0.2 1.7 1.3 1.3 1.3 Dφ W A WT Anti-Vibration Skirt L T R R I P I Termination deflection: WT = 0.15mm max. from bottom of support terminals B WT LAND PATTERN DIM. (mm) Case Size 8x6.5 8x10.5 10x10.5 10x14 a 1.8 2.5 3.8 3.8 b 4.2 4.5 4.8 4.8 c 5.0 4.7 4.7 4.7 b a b c 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors TR13 330mm (13") REEL TR15 380mm (15") REEL CARRIER TAPE Case Size 4 x 6.1 5 x 6.1 6.3 x 6.1 6.3 x 8 8 x 6.5 8 X 10.5 10 x 10.5 10 x 14 NAZJ Series A ±0.3 B ±0.3 C ±0.3 D ±0.1 P ±0.1 T ±0.2 4.7 4.7 12.0 5.5 8.0 6.2 5.7 5.7 12.0 5.5 12.0 6.4 7.0 7.0 16.0 7.5 12.0 6.4 7.0 7.0 16.0 7.5 12.0 8.4 8.7 8.7 16.0 7.5 12.0 6.8 8.7 8.7 24.0 11.5 16.0 11.1 10.7 10.7 24.0 11.5 16.0 11.2 10.7 10.7 24.0 11.5 16.0 14.6 Case Size W ±1.0 4 x 6.1 5 x 6.1 6.3 x 6.1 6.3 x 8 8 x 6.5 8 X 10.5 10 x 10.5 10 x 14 14.0 14.0 18.0 18.0 18.0 26.0 26.0 26.0 Quantity Per Reel 13" Reel 15" Reel 1,200 pcs 800 pcs 1,000 pcs 900 pcs 800 pcs 500 pcs 500 pcs 400 pcs Taping Specifications (mm) 1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets. 2. Leader tape: Approximately 20cm of cover tape at leader. 3. Connection: Maximum 3 connections (slices) per reel. CARRIER 4 + 0.1 1.5∅ +0.1/1.5φ+0.1/-0 1.75 + 0.15 1.75 ± C B D - 0.4 + 0.2 + A P Feeding T REEL 2. 0± 50∅ Min. 2 ±0 1 .8 0. 330 or 380mm 13∅ ±0.5 3.0 ± 0.5 5 W 5 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com