Surface Mount Aluminum Electrolytic Capacitors FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION • LONG LIFE (7,000 ~ 10,000 HOURS) • WIDE TEMPERATURE RANGE (-25°C ~ +105°C) • DESIGNED FOR REFLOW SOLDERING NAZV Series RoHS Compliant includes all homogeneous materials *See Part P Number N b System S for f Details D il CHARACTERISTICS Rated Voltage Range 6.3 ~ 50V Rated Capacitance Range 10 ~ 1000μF Operating Temperature Range -25°C ~ +105°C Capacitance Tolerance ±20% (M) Max. Leakage Current After 2 Minutes at 20°C 0.01CV or 3μA whichever is greater W.V. (Vdc) 6.3 10 16 25 35 50 Surge Voltage and Max. Tan δ S.V.(Vdc) 8 13 20 32 44 63 Tan δ 0.32 0.28 0.26 0.16 0.14 0.14 Low Temperature Stability Z-25°C/Z+20°C 4 3 2 2 2 2 (Impedance Ratio @ 120Hz) Load Life Hours φD < 6.3mm = 7,000 φD > 8 = 10,000 hours Capacitance Change Within ±30% of initial measured value High Temperature Load Life at 105°C and Rated Working Voltage Tan δ Less than 300% of specified value Leakage Current Less than the specified value STANDARD PRODUCT AND SIZE DφxL (mm) Cap. Code (μF) 10 100 22 220 33 330 47 470 100 101 150 151 220 221 330 331 470 471 1000 102 6.3 5X7.3 6.3X7.3 6.3X8.7 6.3X8.7 8X10.5 10X10.5 10 5X7.3 6.3X7.3 - Working Voltage (Vdc) 16 25 5X7.3 5X7.3 6.3X7.3 6.3X7.3 6.3X7.3 6.3X7.3 6.3X8.7 6.3X8.7 8X10.5 6.3X8.7 8X10.5 8X10.5 10X10.5 10X10.5 - 35 5X7.3 5X7.3 6.3X8.7 6.3X8.7 8X10.5 10X10.5 - Dφ 50 6.3X8.7 8X10.5 8X10.5 10X10.5 - L 0.3mm max. + I I - W DIMENSIONS (mm) Case Size Dφ±0.5 L max. A/B±0.2 I ± 0.2 5X7.3 5 7.3 5.3 2.2 6.3X7.3 6.3 7.3 6.6 2.5 6.3X8.7 6.3 8.7 6.6 2.5 8X10.5 8 10.5 8.3 2.9 10X10.5 10 10.5 10.3 3.2 W 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.7 ~ 1.0 1.0 ~ 1.4 P±0.2 1.4 2.2 2.2 3.2 4.6 A P B PART NUMBER SYSTEM NAZV 220 M 25V 5x7.3 L B F Series RoHS Compliant B=Sn-Bi Finish & 330mm (13”) Reel LB=Sn-Bi Finish & 380mm (15") Reel Reflow Temp. CodeTape & Reel Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in μF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10μF PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Surface Mount Aluminum Electrolytic Capacitors NAZV Series STANDARD VALUES, CASE SIZES AND SPECIFICATIONS NIC Part Number NAZV470M6.3V5X7.3LBF NAZV101M6.3V6.3X7.3LBF NAZV221M6.3V6.3X8.7LBF NAZV331M6.3V6.3X8.7LBF NAZV471M6.3V8X10.5LBF NAZV102M6.3V10X10.5LBF NAZV330M10V5X7.3LBF NAZV151M10V6.3X7.3LBF NAZV220M16V5X7.3LBF NAZV470M16V6.3X7.3LBF NAZV101M16V6.3X7.3LBF NAZV151M16V6.3X8.7LBF NAZV221M16V6.3X8.7LBF NAZV331M16V8X10.5LBF NAZV471M16V10X10.5LBF NAZV220M25V5X7.3LBF NAZV330M25V6.3X7.3LBF NAZV470M25V6.3X7.3LBF NAZV101M25V6.3X8.7LBF NAZV151M25V8X10.5LBF NAZV221M25V8X10.5LBF NAZV331M25V10X10.5LBF NAZV100M35V5X7.3LBF NAZV220M35V5X7.3LBF NAZV330M35V6.3X8.7LBF NAZV470M35V6.3X8.7LBF NAZV101M35V8X10.5LBF NAZV221M35V10X10.5LBF NAVZ220M50V6.3X8.7LBF NAVZ330M50V8X10.5LBF NAZV470M50V8X10.5LBF NAZV101M50V10X10.5LBF Cap. (μF) 47 100 220 330 470 1000 33 150 22 47 100 150 220 330 470 22 33 47 100 150 220 330 10 22 33 47 100 220 22 33 47 100 W.V. (Vdc) Dissipaton Factor (Tan δ) 0.32 0.32 0.32 0.32 0.32 0.32 0.28 0.28 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 6.3 10 16 25 35 50 Max. Ripple Current (mA) +105°C/100KHz 95 140 230 230 600 850 95 140 95 140 140 230 230 600 850 95 140 140 230 600 600 850 95 95 230 230 600 850 100 350 350 850 Max. Z (Ω) +20°C/100KHz 2.2 1.1 1.0 1.0 0.22 0.16 2.2 1.1 2.2 1.1 1.1 1.0 1.0 0.22 0.16 2.2 1.1 1.1 1.0 0.22 0.22 0.16 2.2 2.2 1.0 1.0 0.22 0.16 1.80 0.53 0.53 0.35 Load Life Hours @ +105°C 7,000 7,000 7,000 7,000 10,000 10,000 7,000 7,000 7,000 7,000 7,000 7,000 7,000 10,000 10,000 7,000 7,000 7,000 7,000 10,000 10,000 10,000 7,000 7,000 7,000 7,000 10,000 10,000 7.000 10,000 10,000 10,000 RIPPLE CURRENT FREQUENCY CORRECTION FACTORS Frequency 1KHz 10KHz 0.80 0.90 0.85 0.92 0.85 0.95 120Hz 0.50 0.65 0.70 10 ~ 22 33 ~ 150 220 ~ 1000 100KHz 1.00 1.00 1.00 PEAK REFLOW TEMPERATURE AND DURATION Diameter 5 ~ 6.3mm φ 8 ~ 10mm φ Time above 200°C 70 sec. max. 60 sec. max. Time above Peak Temperature 230°C 5 seconds 40 sec. max. 250°C 20 sec. max. 250°C RECOMMENDED LAND PATTERN DIMENSIONS (mm) Case Size a b c 5x7.3 1.4 3.0 1.8 6.3x7.3 6.3x8.7 1.8 3.6 1.8 8x10.5 2.8 4.1 2.1 10x10.5 4.3 4.4 2.5 Temperature - Deg. C Cap. (μF) Peak Temperature (see table) 230 Time Above 230°C (see table) 200 150 100 Time Above 200°C (see table) Preheat - 120 seconds max. (150°C ~ 180°C) 50 a Time (Seconds) Capacitors can withstand two times reflow at the above conditions. Second reflow shall be at least one hour after natural cool to room temperature. c b Review & Compare Reflow Soldering Heat Limits V-chip SMT Aluminum Electrolytic Capacitors www.niccomp.com/RSL 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors NAZV Series EMBOSSED CARRIER DIMENSIONS (mm) Case Size 5X7.3 6.3X7.3 6.3X8.7 8X10.5 10X10.5 A ± 0.3 5.7 7.0 7.0 8.7 10.7 B ± 0.3 5.7 7.0 7.0 8.7 10.7 C ± 0.3 12.0 16.0 16.0 24.0 24.0 D ± 0.1 5.5 7.5 7.5 11.5 11.5 P ± 0.1 12.0 12.0 12.0 16.0 16.0 T ± 0.2 7.1 7.5 9.2 11.1 11.2 t ± 0.1 0.4 0.4 0.4 0.4 0.4 TAPING SPECIFICATIONS (mm) 1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets. 2. Leader tape: Approximately 20cm of cover tape at leader. 3. Connection: Maximum 3 connections (slices) per reel. 1.75 + 0.15 1.5 +0.1/1.5+0.1/-0 1.75 ± C B - t D 4 + 0.1 + A P Feeding T REEL DIMENSIONS AND QUANTITIES Case Size W ± 1.0 Reel Quantity 330mm Reel Quantity 380mm 5X7.3 6.3X7.3 6.3X8.7 8X10.5 10X10.5 14 18 18 26 26 800 800 500 300 300 1,000 1,000 800 500 500 2. 0± 50∅ Min. 2 ±0 1 .8 0. 330 or 380mm 13∅ ±0.5 3.0 ± 0.5 5 W NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3