Hybrid Aluminum Electrolytic Capacitors NSPE-S Series • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • EXTENDED LOAD LIFE (3,000 ~ 5,000 HOURS) • AVAILABLE WITH WIDE TERMINATION & ANTI-VIBRATION SKIRT • ULTRA LOW ESR, HIGH RIPPLE CURRENT • CAPACITANCE VALUES UP TO 1000μF • 6.3x6.3mm ~ 10x10.8mm CASE SIZES • REFLOW SOLDERING RATED TO +260°C (see reflow specifications) RoHS • MEETS THE REQUIREMENTS OF AEC-Q200* Compliant *Contact NIC for supporting test data includes all homogeneous materials *See Part Number System for Details CHARACTERISTICS Rated Voltage Range Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Minutes @ 20°C 6.3 ~ 16Vdc 10 ~ 1000µF -55 ~ +105°C ±20% (M) See Specifications Tables W.V. (Vdc) S.V. (Vdc) Working and Surge Voltage Ratings Tan δ @ 120Hz/20°C 6.3 8.2 0.18 Z -55°C/Z +20°C Z +105°C/Z +20°C Capacitance Change Tan δ and ESR Leakage Current Impedance Ratio Load Life Test @ 105°C 6.3mm Dia. = 3,000 Hours 8mm ~ 10mm Dia. parts = 5,000 Hours 10 16 13 20 0.16 0.14 1 ~ 2.5 0.6 ~ 1.0 Within ±30% of initial measured value Less than 200% of specified max. value Less than specified max. value PART NUMBER SYSTEM NSPE-S 471 M 6.3V 8x10.8 TR 13 WT Y F Series RoHS Compliant 97% Sn (min.), 3% Bi (max.) WT = Wide Terminations 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in μF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10μF Optional: Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site STANDARD PRODUCTS AND CASE SIZES Dφ x L (mm) PART NUMBER Cap. (μF) NSPE-S101M6.3V6.3X6.3TR13F 100 6.3X6.3 Max. Leakage Current (mA) After 2 minutes* 126 NSPE-S151M6.3V6.3X6.3TR13F 150 6.3X6.3 189 6.3X8 NSPE-S221M6.3V6.3X8TR13F NSPE-S221M6.3V8X10.8TR13F Working Voltage Case Size (D X L) mm 220 Max. ESR (mΩ) AT 100kHz/20°C Max. Ripple Current (mA rms) AT 100kHz/105°C 36 1630 36 1630 278 32 2020 8X10.8 278 16 3150 8X10.8 416 16 3150 8X10.8 492 16 3150 NSPE-S331M6.3V8X10.8TR13F 330 NSPE-S391M6.3V8X10.8TR13F 390 NSPE-S471M6.3V8X10.8TR13F 470 8X10.8 593 16 3150 NSPE-S561M6.3V8X10.8TR13F 560 8X10.8 706 16 3150 NSPE-S681M6.3V10X10.8TR13F 680 10X10.8 857 15 3890 NSPE-S821M6.3V10X10.8TR13F 820 10X10.8 1034 15 3890 NSPE-S102M6.3V10X10.8TR13F 1000 10X10.8 1260 15 3890 6.3 For Automotive Applications See Part Numbering System 1 NIC COMPONENTS CORP. www.niccomp.com *Please review typical leakage current performance, as shown on NIC load life endurance test report. www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Hybrid Aluminum Electrolytic Capacitors NSPE-S Series STANDARD PRODUCTS AND CASE SIZES Dφ x L (mm) NSPE-S330M10V6.3X6.3TR13F 33 6.3X6.3 Max. Leakage Current (mA) After 2 minutes* 100 40 1510 NSPE-S470M10V6.3X6.3TR13F 47 6.3X6.3 100 40 1510 NSPE-S680M10V6.3X6.3TR13F 68 6.3X6.3 136 40 1510 Cap. (μF) PART NUMBER NSPE-S101M10V6.3X8TR13F NSPE-S101M10V8X10.8TR13F NSPE-S151M10V6.3X8TR13F NSPE-S151M10V8X10.8TR13F Working Voltage Case Size (D X L) mm 100 10 150 Max. ESR (mΩ) AT 100kHz/20°C Max. Ripple Current (mA rms) AT 100kHz/105°C 6.3X8 200 35 1910 8x10.8 200 18 2800 6.3x8 300 35 1910 8X10.8 300 18 2800 NSPE-S221M10V8X10.8TR13F 220 8X10.8 440 18 2800 NSPE-S331M10V8X10.8TR13F 330 8X10.8 660 18 2800 NSPE-S471M10V10X10.8TR13F 470 10X10.8 940 16 3650 NSPE-S561M10V10X10.8TR13F 560 10X10.8 1120 16 3650 NSPE-S100M16V6.3X6.3TR13F 10 6.3X6.3 100 54 1130 NSPE-S220M16V6.3X6.3TR13F 22 6.3X6.3 100 54 1130 NSPE-S330M16V6.3X6.3TR13F 33 6.3X6.3 106 54 1130 NSPE-S470M16V6.3X8TR13F 47 6.3X8 151 45 1480 NSPE-S470M16V8X10.8TR13F 47 8X10.8 151 22 2290 16 NSPE-S680M16V8X10.8TR13F 68 8X10.8 218 22 2290 NSPE-S101M16V8X10.8TR13F 100 8X10.8 320 22 2290 10X10.8 480 NSPE-S151M16V10X10.8TR13F 150 For Automotive Applications See Part Numbering System 20 2920 *Please review typical leakage current performance, as shown on NIC load life endurance test report. RIPPLE CURRENT FREQUENCY CORRECTION FACTORS Cap. μF C < 10 > 10 100Hz 0.03 0.05 1KHz 0.20 0.20 10KHz 0.50 0.50 100KHz 1.00 1.00 Part Marking Series Code Lot Code S17 100 6V Capacitance Value Voltage PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Hybrid Aluminum Electrolytic Capacitors LAND PATTERN DIM. (mm) DIMENSIONS (mm) Case Size 6.3x6.3 6.3x8 8x10.8 10x10.8 Dφ ±0.5 6.3 6.3 8.0 10 NSPE-S Series L max. 6.3 8.0 10.8 10.8 A, B ±0.2 6.6 6.6 8.3 10.3 + Dφ W 0.5 ~ 0.8 0.5 ~ 0.8 0.7 ~ 1.0 1.0 ~ 1.4 I I I ±0.2 2.5 2.5 2.9 3.2 P ±0.2 2.2 2.2 3.2 4.6 Case Dia. 6.3 8 10 A 3.5 4.1 4.4 B 1.8 2.1 2.5 + - P 2.1 2.8 4.3 - W B A L 0.3mm max. P A B A WIDE TERMINATION LAND PATTERN DIM. (mm) WIDE TERMINATION DIM. (mm) Case Size 8x10.8 10x10.8 Case Size Dφ ±0.5 L ± 0.5 A, B C ±0.2 P ±0.2 W R T 8 x 10.8WT 8.0 10.5 8.3 ± 0.2 9.0 3.2 0.7 ~ 1.0 (0.7) (1.3) 10 x 10.8WT 10.0 10.5 10.3 ± 0.2 11.0 4.6 1.0 ~ 1.4 (0.7) (1.3) C a 2.5 3.8 WT Anti-Vibration Skirt A b 4.5 4.8 c 4.7 4.7 a Dφ W c L T b R R P P Termination deflection: WT = 0.15mm max. from bottom of support terminals B Temperature - Deg. C RECOMMENDED REFLOW SOLDERING PROFILE Peak Temperature (see table below) 260 230 217 200 Time Above 230°C (40 seconds max.) 150 100 Time Above 200°C (see table below) Preheat - 120 seconds max. (see table for temperature) 50 Time (Seconds) PEAK TEMPERATURES AND DURATIONS Preheat Time above Time above Time above Peak (120 sec. max.) 200°C 217°C 230°C Temperature 150°C ~ 190°C 100 sec. max. 80 sec. max. 40 sec. max. 250°C/5 sec. 6.3 ~ 10mm 150°C ~ 180°C 60 sec. max. 50 sec. max. 40 sec. max. 260°C/instantaneous *Two reflow passes are permissible with a cool down to room temperature required between the first and second pass. Diameter 3 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com Number of Reflow Passes 2x* 1x www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Hybrid Aluminum Electrolytic Capacitors NSPE-S Series Taping Specifications (mm) 1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets. 2. Leader tape: Approximately 20cm of cover tape at leader. 3. Connection: Maximum 3 connections (slices) per reel. D ±0.1 7.5 7.5 11.5 11.5 P ±0.1 12.0 12.0 16.0 16.0 T ±0.2 6.5 8.2 11.1 11.2 t max. 0.4 0.4 0.4 0.4 REEL DIMENSIONS (mm) Case Size 6.3x6.3 6.3x8 8x10.8 10x10.8 W ±1.0 18 18 26 26 - B C ±0.3 16.0 16.0 24.0 24.0 t D B ±0.5 7.0 7.0 8.7 10.7 1.75 ± + A P Feeding T 2mm ± 0.5mm Qty per Reel 13" (330mm) 15" (380mm) 800 1,000 500 900 300 500 300 500 φ13mm ± 0.5mm φ50mm min. 6.3x6.3 6.3x8 8x10.8 10x10.8 A ±0.5 7.0 7.0 8.7 10.7 1.75 + 0.15 1.5∅ +0.1/1.5φ+0.1/-0 C Case Size 4 + 0.1 φ21mm ± 0.8mm φ330mm ± 2.0mm or φ380mm ± 2.0mm 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com W www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE 3mm www.SMTmagnetics.com