Sulfur Resistant Thick Film Chip Resistors NRC-AS Series FEATURES • • • • • EIA STANDARD SIZING 0201, 0402, 0603, 0805, 1206, 1210, 2010 AND 2512 RoHS SUIT FOR HIGH RELIABILITY APPLICATIONS IN HARSH ENVIRONMENTS Compliant AEC-Q200 QUALIFIED OPTION AVAILABLE (SEE PART NUMBERING SYSTEM) includes all homogeneous materials ALL SIZES ARE AVAILABLE IN TAPE/REEL FOR AUTOMATIC MOUNTING SAC REFLOW SOLDERABLE (THREE TIMES AT 260°C FOR 10 SECONDS) *See Part Number System for Details SPECIFICATIONS Type EIA Size NRC-AS02 0201 Max. *1 Power Rating Working at 70°C Voltage 0.05W 25V Max. *2 Overload Voltage Resistance Tolerance Code Temperature Coefficient (ppm/°C) 50V ±1%(F), ±5%(J) Resistance Range (W)*3 Resistance Values Operating Temperature Range ±200ppm 1 ~ 10M E-24 & 96 -55°C ~ +125°C ±100ppm 10 ~ 1M 1 ~ 9.76 1.02M ~ 10M 10 ~ 1M 1 ~ 9.76 1.02M ~ 10M 10 ~ 1M 1 ~ 9.76 1.02M ~ 10M 10 ~ 1M 1 ~ 9.76 1.02M ~ 10M 10 ~ 1M 1 ~ 9.76 1.02M ~ 10M 10 ~ 1M 1 ~ 9.76 1.02M ~ 10M 10 ~ 1M 1 ~ 9.76 1.02M ~ 10M NRC-AS04 0402 0.063W 50V 100V ±0.5%(D), ±1%(F), ±5%(J) ±200ppm NRC-AS06 0603 0.10W 75V 100V ±0.5%(D), ±1%(F), ±5%(J) ±200ppm NRC-AS10 0805 0.125W 150V 300V ±0.5%(D), ±1%(F), ±5%(J) NRC-AS12 1206 0.25W 200V 400V ±0.5%(D), ±1%(F), ±5%(J) ±200ppm NRC-AS25 1210 0.33W 200V 400V ±0.5%(D), ±1%(F), ±5%(J) ±200ppm NRC-AS50 2010 0.75W 200V 400V ±0.5%(D), ±1%(F), ±5%(J) NRC-AS100 2512 1.0W 250V 500V ±0.5%(D), ±1%(F), ±5%(J) Note *1 - Maximum allowable continuous Working Voltage for all resistors is the lower of the two values: “Maximum Working Voltage” as specified above or the result of the following formula ±100ppm ±100ppm ±200ppm ±100ppm ±100ppm ±100ppm ±200ppm ±100ppm ±200ppm E-24 & 96 E-24 & 96 E-24 & 96 RATE (%) 60 40 0 ZERO OHM JUMPERS* Max. Resistance NIC COMPONENTS CORP. www.niccomp.com -55°C ~ +155°C 20 Power rating (Watts) x Resistance (Ohms) NRC-AS02ZOTRF 0201 1A <50mW NRC-AS04ZOTRF 0402 1A <50mW NRC-AS06ZOTRF 0603 1A <50mW NRC-AS10ZOTRF 0805 2A <50mW NRC-AS12ZOTRF 1206 2A <50mW NRC-AS25ZOTRF 1210 2.5A <50mW NRC-AS50ZOTRF 2010 3.5A <50mW NRC-AS100ZOTRF 2512 4A <50mW *Optional AEC Q-200 Qualified "TRQYF" is also available E-24 & 96 80 "Maximum Overload Voltage" as specified above or 2x the result of the following formula Max. Current at 70°C E-24 & 96 100 Note *2 - "Maximum Overload Voltage" for all resistors is the lower of the two values: EIA Size E-24 & 96 Power Derating Curve: For operation above 70oC, power ratingmust be derated according to the following chart: Power rating (Watts) x Resistance (Ohms) Part Number E-24 & 96 -20 20 60 70oC Operating Temperature Range -55°C ~ +125°C 100 120 125°C 155°C 0201 0402 0603 0805 1206 1210 2010 2512 -55°C ~ +155°C www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Sulfur Resistant Thick Film Chip Resistors NRC-AS Series DIMENSIONS (mm) Type EIA Size NRC-AS02 0201 0.60 ± 0.03 0.30 ± 0.03 0.23 ± 0.03 0.15 ± 0.05 0.15 ± 0.05 NRC-AS04 0402 1.00 ± 0.05 0.50 ± 0.05 0.35 ± 0.05 0.20 ± 0.10 0.20 ± 0.10 NRC-AS06 0603 1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.30 ± 0.20 0.30 ± 0.20 NRC-AS10 0805 2.00 ± 0.10 1.25 ± 0.10 0.50 ± 0.10 0.35 ± 0.20 0.40 ± 0.20 NRC-AS12 1206 3.10 ± 0.10 1.55 ± 0.10 0.55 ± 0.10 0.50 ± 0.25 0.50 ± 0.20 L W H T t NRC-AS25 1210 3.10 ± 0.10 2.60 ± 0.15 0.55 ± 0.10 0.50 ± 0.25 0.50 ± 0.20 NRC-AS50 2010 5.00 ± 0.10 2.50 ± 0.15 0.55 ± 0.10 0.60 ± 0.25 0.50 ± 0.20 NRC-AS100 2512 6.35 ± 0.10 3.10 ± 0.15 0.55 ± 0.10 0.60 ± 0.25 0.50 ± 0.20 PART NUMBER SYSTEM - STANDARD PARTS PART NUMBER SYSTEM (E-24 VALUES) NRC-AS 12 J 103 TR F RoHS compliant Tape & Reel Packaging Resistance Code: First 2 figures are significant, 3rd digit is the multiplier, “R” indicates a decimal point. Tolerance Code: J = ±5% Case Size Series PART NUMBER SYSTEM (E-96 VALUES) NRC-AS 12 F 1002 TR F RoHS compliant Tape & Reel Packaging Resistance Code: First 2 figures are significant, 3rd digit is the multiplier, “R” indicates a decimal point. Tolerance Code: F = ±1% Case Size Series PART NUMBER SYSTEM - AUTOMOTIVE OPTION PART NUMBER SYSTEM (E-24 VALUES) NRC-AS 12 J 103 TR QY F RoHS compliant Series Tape & Reel Packaging Resistance Code: First 2 figures are significant, 3rd digit is the multiplier, “R” indicates a decimal point. Tolerance Code: J = ±5% Case Size "QY" denotes optional AEC Q-200 qualified parts suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Sulfur Resistant Thick Film Chip Resistors NRC-AS Series PART NUMBER SYSTEM - AUTOMOTIVE OPTION PART NUMBER SYSTEM (E-96 VALUES) NRC-AS 12 F 1002 TR QY F RoHS compliant Series Tape & Reel Packaging Resistance Code: First 2 figures are significant, 3rd digit is the multiplier, “R” indicates a decimal point. Tolerance Code: F = ±1% Case Size "QY" denotes optional AEC Q-200 qualified parts suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site Item Specification ±0.5% & ±1% tolerance Temperature Coefficient of Resistance Short Time Overload ±5% tolerance Test Method Zero Ohm Jumper As specified ∆R ±1% +0.05W Insulation Resistance -55°C ~ +125°C, +25°C reference point ∆R ±2% +0.05W 50mW RCWV x 2.5 or Max Overloading Voltage for 5 Seconds Maximum Overload Voltage for 1 Minute >10GΩ Load Life ∆R ±2% +0.10W ∆R ±3% +0.10W 100mW Max. WV +70°C, 1.5 hours ON, 0.5 hours OFF Total time 1,000 Damp Heat (with load) ∆R ±2% +0.10W ∆R ±3% +0.10W 100mW +40°C, 90% ~ 95% RH, Max. WV 1.5 hours ON, 0.5 hours OFF Total time 1,000 Resistance to Dry Heat ∆R ±1% +0.05W ∆R ±1.5% +0.05W 50mW +125°C or +155°C for 1000 hours Temperature Cycling ∆R ±0.5% +0.05W ∆R ±1% +0.05W 50mW -55°C to +125°C or +155°C, 5 cycles Bending Strength ∆R ±1% +0.05W ∆R ±2% +0.05W 50mW Bending amplitude 3mm (2mm for 2010 & 2512) One bend for 5 seconds ∆R ±1% +0.05W 50mW 260°C ±5°C for 10 seconds 50mW 1,000ppm H2S, +50°C ± 2°C, 91 ~ 93% RH for 1,000 hours (no power) Resistance to Soldering ∆R ±0.5% +0.05W Heat Sulfur Test Leaching Test ∆R ±0.5% +0.05W ∆R ±0.5% +0.05W Individual leaching are < 5% Total leaching area < 10% +260°C for 30 seconds CONSTRUCTION Top Electrode Base (Ag-Pd) Edge Electrode Base (NiCr) Barrier Layer (Ni) Finish Layer (Sn) 2nd Overcoat (Epoxy) 1st Overcoat (Glass) Resistive Layer RuO2/Ag Alumina Substrate Bottom Electrode Base (Ag) NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Sulfur Resistant Thick Film Chip Resistors NRC-AS Series STANDARD E-24, E-96 VALUES AND 0603 RESISTANCE CODES E-24 Value 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 E-96 Value Code 100 01 110 05 121 09 133 13 147 17 162 21 178 25 196 29 215 33 237 37 261 41 287 45 316 49 348 53 383 57 422 61 464 65 511 69 562 73 619 77 681 81 750 85 825 89 909 93 Value Code 102 02 113 06 124 10 137 14 150 18 165 22 182 26 200 30 221 34 243 38 267 42 294 46 324 50 357 54 392 58 432 62 475 66 523 70 576 74 634 78 698 82 768 86 845 90 931 94 Value Code 105 03 115 07 127 11 140 15 154 19 169 23 187 27 205 31 226 35 249 39 274 43 301 47 332 51 365 55 402 59 442 63 487 67 536 71 590 75 649 79 715 83 787 87 866 91 953 95 Value Code 107 04 118 08 130 12 143 16 158 20 174 24 191 28 210 32 232 36 255 40 280 44 309 48 340 52 374 56 412 60 453 64 499 68 549 72 604 76 665 80 732 84 806 88 887 92 976 96 PAPER CARRIER TAPE DIMENSIONS (mm) fD0 /--0 T 2.00 1.50 0.42±0.20 2.00 2.00 1.50 0.45±0.10 4.00 4.00 2.00 1.50 0.70±0.10 3.50 4.00 4.00 2.00 1.50 0.85±0.10 1.75 3.50 4.00 4.00 2.00 1.50 0.85±0.10 1.75 3.50 4.00 4.00 2.00 1.50 0.85±0.10 fD0 /--0 T max. Type EIA Case Size A B W ± 0.20 E ± 0.10 F ± 0.05 P0 ± 0.10 P1 ± 0.05 P2 ± 0.05 NRC-AS02 0201 0.38±0.05 0.68±0.05 8.0 1.75 3.50 4.00 2.00 NRC-AS04 0402 0.65±0.10 1.15±0.10 8.0 1.75 3.50 4.00 NRC-AS06 0603 1.10±0.10 1.90±0.10 8.0 1.75 3.50 NRC-AS10 0805 1.60±0.10 2.40±0.20 8.0 1.75 NRC-AS12 1206 1.90±0.10 3.50±0.20 8.0 NRC-AS25 1210 2.90±0.10 3.50±0.20 8.0 P1 +0.1 fD0 P2 E Cover tape F W B P1 A T Type EIA Case Size A B W ± 0.30 E ± 0.10 F ± 0.05 P0 ± 0.10 P1 ± 0.05 P2 ± 0.05 NRC-AS50 2010 2.8±0.10 5.5±0.10 12.0 1.75 5.50 4.00 4.00 2.00 1.50 1.2 NRC-AS100 2512 3.5±0.10 6.7±0.10 12.0 1.75 5.50 4.00 4.00 2.00 1.50 1.2 +0.1 T1 P0 P2 D E Cover tape F W B A T2 4 NIC COMPONENTS CORP. www.niccomp.com P1 www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Sulfur Resistant Thick Film Chip Resistors NRC-AS Series NRC-AS04 0402 10,000 NRC-AS06 0603 5,000 NRC-AS10 0805 5,000 NRC-AS12 1206 5,000 NRC-AS25 1210 5,000 NRC-AS50 2010 4,000 NRC-AS100 2512 4,000 Tape Width Reel Diameter fB fC 60.0 +1/-0 8mm 178.5 ± 1.5 100 ±0.5 60.0 +1/-0 12mm 13.0 ±0.2 13.0 ±0.5 W T 9.0 ±0.5 12.5 ±0.5 D 9.5 ±0.5 13.5 ±0.5 13.0 ±0.5 15.5 ±0.5 E A NRC-AS02 EIA Reel Case Size Quantity 0201 15,000 B Type C REEL DIMENSIONS (mm) W LAND PATTERN DIMENSIONS (mm) Type EIA Case Size A B C NRC-AS02 0201 0.30 0.25 0.30 NRC-AS04 0402 0.50 0.45 0.60 NRC-AS06 0603 0.90 0.60 0.90 NRC-AS10 0805 1.20 0.70 1.30 NRC-AS12 1206 2.00 0.90 1.60 NRC-AS25 1210 2.00 0.90 2.80 NRC-AS50 2010 3.80 0.90 2.80 NRC-AS100 2512 3.80 1.60 3.50 300 C B A REFLOW SOLDERING TEMPERATURE PROFILE 260 Peak Temperature 260°C 10 sec. max. 220 200 150 100 120 Sec. Time above 230°C 40 sec. max. 50 0 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 5