Chip Resistor Arrays/Networks NRSNL Series FEATURES • MINIATURE SIZE AND LOW PROFILE • Pb-FREE (100ppm) RoHS • HIGH DENSITY PACKAGING OFFERS SIGNIFICANT SPACE SAVINGS Compliant • LOWER PRODUCTION COSTS WITH LESS PLACEMENT includes all homogeneous materials (4 RESISTORS IN ONE PACKAGE) *See Part Number System for Details • REFLOW SOLDERING APPLICABLE SPECIFICATIONS Type NRSNLA4I4 NRSNLA6I4 Termination Type Convex Convex Size W x L (mm) 1.0 x 2.0 1.6 x 3.2 No. of Resistors & Circuit 4R Isolated 4R Isolated Power Rating per Resistor @ +70°C 1/16 (.0625W) 1/10 (.10W) Resistance Tolerance F (±1%) J (±5%) F (±1%) J (±5%) Resistance Range 10Ω ~ 1MΩ 1.0Ω ~ 1MΩ 10Ω ~ 1MΩ 1.0Ω ~ 1MΩ ±100ppm ±200ppm Temperature Coeffient ±200ppm Maximum Working Voltage* 50V 50V Maximum Overload Voltage 100V 100V Operating Temperature Range -55°C ~ +155°C (derated as shown) * Maximum allowable continuous voltage for all resistors is the lower of the two values: “MAXIMUM WORKING VOLTAGE” as specified, or Power rating (WATTS) x Resistance (OHMS) Power Derating Curve: For operation above 70oC, power rating must be derated according to the following chart: 100 PART NUMBER SYSTEM (E-24 VALUES) NRSNL A 4I4 J 103 TR F RoHS compliant Tape & Reel Packaging Resistance Code: First 2 figures are significant, 3rd digit is the multiplier, “R” indicates a decimal point. Tolerance Code: J=5%, G=2%, F=1% Configuration Designator (See circuit schematics and component diagrams for explanation) Termination Type (A = Convexed) Series 80 60 40 20 PART NUMBER SYSTEM (E-24 & E-96 VALUES) NRSNL A 4I4 F 1002 TR F RoHS compliant Tape & Reel Packaging Resistance Code: First 3 figures are significant, 4th digit is the multiplier, “R” indicates a decimal point. Tolerance Code: F=1% Configuration Designator (See circuit schematics and component diagrams for explanation) Termination Type (A = Convexed) Series NIC COMPONENTS CORP. www.niccomp.com 0 -55 0 70 100 155°C ZERO OHM JUMPER SPECIFICATIONS Part Number NRSNLA4I4ZOTRF NRSNLA6I4ZOTRF Termination Type Size W x L (mm) No. of Resistors & Circuit Power Rating @ +70°C Max. Resistance Rated Current Peak Current Operating Temperature Convex Convex 1.0 x 2.0 1.6 x 3.2 4R Isolated 4R Isolated 1/16W 1/10W 50mΩ 50mΩ 1A 1A 1.5A 3.0A -55°C ~ +155°C (derated as shown) www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Chip Resistor Arrays/Networks NRSNL Series PART DIMENSIONS (mm) Type W L P T A B C G NRSNLA4I4 1.00 ± 0.10 2.20 ± 0.10 0.50 ± 0.05 0.45 ± 0.10 0.40 ± 0.10 0.20 ± 0.10 0.30 ± 0.05 0.25 ± 0.10 NRSNLA6I4 1.60 ± 0.10 3.20 ± 0.10 0.80 ± 0.10 0.50 ± 0.10 0.60 ± 0.10 0.30 ± 0.10 0.40 ± 0.10 0.30 ± 0.20 NRSNLA4I4, NRSNLA6I4 CIRCUIT SCHEMATICS Terminations P B G A W T C L Top Side Bottom Side NRSNLA4I4 NRSNLA6I4 Circuit Type “I” (Isolated) ENVIROMENTAL SPECIFICATIONS (JIS C5201-1:1998) Specification Item Zero Ohm Jumper DC Resistance Clause 4.5 Within specification <50mΩ DC resistance value measurement Temperature Coefficient of Resistance Clause 4.8 As specified N/A Resistance at reference temperature (+20°C +5°C -1°C) to test temperature Short Time Overload Clause 4.13 ΔR ±2%+0.10Ω <50mΩ Permanent resistance change after application of RCWV x 2.5 or Max Overloading Voltage for 5 Seconds Resistance to Soldering Heat Clause 4.18 ΔR ±1%+0.10Ω No visable damage <50mΩ Unmounted chips completely immersed in SAC solder bath at 260°C ± 5°C for 10 sec. ±1 sec. Solderability Clause 4.17 Insulation Resistance Clause 4.6 Dielectric Withstanding Voltage Clause 4.7 Temperature Cycling Clause 4.19 Load Life Clause 4.25 Humidty Load Life Clause 4.24 Adhesion Strength Clause 4.32 2 Test Method 1% & 5% Tolerance >95% coverage No visable damage >10,000MΩ >10,000MΩ No breakdown or flashover ΔR ±1%+0.10Ω No visable damage 10Ω < ~ 1MegΩ ΔR ±3%+0.10Ω No visable damage <10Ω, >1MegΩ ΔR ±5%+0.10Ω No visable damage 10Ω < ~ 1MegΩ ΔR ±3%+0.10Ω No visable damage <10Ω, >1MegΩ ΔR ±5%+0.10Ω No visable damage Apply the maximum overload voltage (DC) for 1 minute Apply the maximum overload voltage (AC) for 1 minute <50mΩ 30 minutes @ -55°C ± 3°C, 2~3 minutes at +20°C+5°C-1°C, 30 minutes @ +155°C ± 3°C, 2~3 minutes +20°C+5°C-1°C, total of 5 continuous cycles <50mΩ +70°C, RCWV 1.5 hours ON, 0.5 hours OFF Total time 1,000 ± 48 hours <50mΩ +40°C, 90~95%RH, RCWV 1.5 hours ON, 0.5 hours OFF Total time 1,000 ± 48 hours No remarkable damage or removal of the termination NIC COMPONENTS CORP. www.niccomp.com Unmounted chips completely immersed in SAC solder bath at 235°C ± 5°C for 2 sec. ±0.5 sec. www.lowESR.com Force: 5N for 10 seconds ± 1 second www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Chip Resistor Arrays/Networks NRSNL Series LAND PATTERN DIMENSIONS (mm) Type NRSNLA4I4 NRSNLA6I4 A 1.80 +0.15/-0.05 2.85 +0.10/-0.05 B 0.30 ± 0.05 0.45 ± 0.05 Reflow Soldering D 0.50 ± 0.10 0.80 ± 0.10 P 0.50 0.80 F 2.00 +0.40/-0.20 3.10±0.30 A P D F B NRSNLA4I4 & NRSNLA6I4 TAPE DIMENSIONS (mm) Type Material NRSNLA4I4 NRSNLA6I4 A B E 1.20 ± 0.2 2.20 ± 0.2 Paper 2.00 ± 0.2 3.60 ± 0.2 F 1.75 ± 0.10 P W 2.0 ± 0.05 3.5 ± 0.20 4.0 ± 0.1 φ1.5+0.1/-0.0 Reel Diameter/Quantity (P/N Suffix) T 8.0 ± 0.3 7" 13" 0.6 max. 10,000 (TRF) 40,000 (TR40F) 1.0 max. 5,000 (TRF) 20,000 (TR20F) 4.0 ±0.1 E F W B T NIC COMPONENTS CORP. www.niccomp.com A www.lowESR.com P www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Chip Resistor Arrays/Networks NRSNL Series REEL DIMENSIONS (mm) Type A B C D W Qty/Reel NRSNLA4I4 φ178 ±2.0 φ60 ±1.0 φ13.0 ±0.2 φ21.0 ±1.0 9.0 ±0.5 10,000 NRSNLA6I4 5,000 C B D W A 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com