View or - NIC Components Corp.

Current Sensing Chip Resistors
NCLP Series
FEATURES
•
•
•
•
•
HIGH POWER SURFACE MOUNTABLE 2512 CASE SIZE
WIDE RANGE OF RESISTANCE VALUES (UP TO 500mW)
METAL STRIP CONSTRUCTION
PRECISON TOLERANCE (±1%)
REFLOW COMPATIBLE
SPECIFICATIONS
Type
EIA
Size
Material
(See Note on EMF
Characteristics Below)
Power Rating
at 70°C
Resistance
Tolerance
(Code)
RoHS
Compliant
includes all homogeneous materials
See Part Number System for Details
Temperature Coefficient
(ppm/°C, +25°C ~ +125°C)
Resistance
Range*
±75ppm
3mW ~ 100mW
±75ppm
1mW ~ 60mW
±75ppm
120mW ~ 500mW
Operating
Temperature
Range (°C)
1W (C)
NCLP25
2512
Ni-Cu
1.5W (D)
2W (E)
3W (G)
1W (C)
NCLP25
2512
Mn-Cu
1.5W (D)
2W (E)
±1% (F)
±2% (G)
±5% (J)
-55°C ~ +170°C
3W (G)
1W (C)
NCLP25
2512
Fe-Al-Cr
1.5W (D)
2W (E)
*Contact NIC regarding availability of values not shown
PART NUMBER SYSTEM
NCLP 25 * * R005 TR N F
RoHS compliant
Material: A = Fe-Al-Cr, N = Ni-Cu, Blank = Mn-Cu
Packaging: TR = Tape & Reel
Resistance Code: See Values Tables
Tolerance Code: J = 5%, G = 2%, F = 1%
Power Rating Code: 1W = C, 1.5W = D, 2W = E, 3W = G
Case Size Code: 25 = 2512
Series
*Insert appropriate power rating and tolerance codes,
Contact NIC regarding availability of other values
THERMAL EMF CHARACTERISTICS:
Mn-Cu Construction: Thermal EMF = -1μV/°C
Ni-Cu Construction: Thermal EMF = -40μV/°C
Fe-Al-Cr Construction: Thermal EMF = 1.45μV/°C
RATED CURRENT: I =
1
EXAMPLE: Part Number NCLP25E_R001TRNF
P = 2W
R = 0.001W (1milli-ohm)
I=
P/R = 2 / 0.001 = 44.7A
P/R
NIC COMPONENTS CORP. www.niccomp.com
www.lowESR.com
www.RFpassives.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
www.SMTmagnetics.com
Current Sensing Chip Resistors
NCLP Series
ENVIRONMENTAL CHARACTERISTICS
Specification
2512
Test Method
Within specified value
+25°C ~ +125°C
<±1%
1,000 hours at rated power, +70°C, 1.5 hours
ON, 0.5 hours OFF
Short Time Overload
<±0.5%
5 x rated power for 5 seconds
Moisture Resistance
(no load)
<±1%
Item
Temperature Coefficient
of Resistance
Load Life
Temperature Cycling
<±0.5%
Resistance to Soldering Heat
<±0.5%
+85°C, 85% RH, 1000 hours
-55°C & +155°C, 300 cycles,
15 minutes at each temperature
+260°C ± 5°C for 10 sec. ±1 sec.,Two cycles
(20 sec. ±1 sec. for 2512 size)
At least 95% coverage
of electrode surface
+245°C ± 5°C, 2 sec. ± 0.5sec.
<±1%
+170°C for 1,000 hours
Low Temperature Storage
<±0.5%
-55°C for 1,000 hours
Substrate Bending
<±0.5%
Bending within 2mm
Insulation Resistance
>100MW
100VDC for 1 minute
Solderability
High Temperature Exposure
Reference Standard
IEC60115-1 4.8
JIS-C5201 4.8
IEC60115-1 4.25.1
JIS-C5201 4.25.1
IEC60115-1 4.13
JIS-C5201 4.13
IEC60115-1 4.24.2 1a
JIS-C5201 4.24.2 1a
IEC60115-1 4.19
JIS-C5201 4.19
IEC60115-1 4.18
JIS-C5201 4.18
IEC60115-1 4.17
JIS-C5201 4.17
IEC60115-1 4.23.2
JIS-C5201 4.23.2
IEC60115-1 4.23.4
JIS-C5201 4.23.4
IEC60115-1 4.33
JIS-C5201 4.33
IEC60115-1 4.6
JIS-C5201 4.6
NCLP25 (2512 CASE SIZE 1W, 1.5W and 2W) AVAILABLE VALUES (Ni-Cu)
Part Number
NCLP25_ _ R003TRNF
NCLP25_ _ R004TRNF
NCLP25_ _ R010TRNF
NCLP25_ _ R011TRNF
NCLP25_ _ R012TRNF
NCLP25_ _ R015TRNF
NCLP25_ _ R018TRNF
NCLP25_ _ R020TRNF
NCLP25_ _ R022TRNF
NCLP25_ _ R025TRNF
NCLP25_ _ R030TRNF
NCLP25_ _ R033TRNF
NCLP25_ _ R039TRNF
NCLP25_ _ R040TRNF
NCLP25_ _ R047TRNF
NCLP25_ _ R050TRNF
NCLP25_ _ R057TRNF
NCLP25_ _ R060TRNF
NCLP25_ _ R068TRNF
NCLP25_ _ R070TRNF
NCLP25_ _ R075TRNF
NCLP25_ _ R080TRNF
NCLP25_ _ R085TRNF
NCLP25_ _ R090TRNF
NCLP25_ _ R100TRNF
2
Resistance
Value (mΩ)
3.0
4.0
10
11
12
15
18
20
22
25
30
33
39
40
47
50
57
60
68
70
75
80
85
90
100
Available
Power Ratings
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
NIC COMPONENTS CORP. www.niccomp.com
www.lowESR.com
Available
Tolerance
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
www.RFpassives.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
Available
TCR
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
www.SMTmagnetics.com
Current Sensing Chip Resistors
NCLP Series
NCLP25 (2512 CASE SIZE 1W, 1.5W, 2W and 3W) AVAILABLE VALUES (Mn-Cu)
Part Number
NCLP25_ _ R001TRF
NCLP25_ _ R0011TRF
NCLP25_ _ R002TRF
NCLP25_ _ R003TRF
NCLP25_ _ R005TRF
NCLP25_ _ R007TRF
NCLP25_ _ R008TRF
NCLP25_ _ R010TRF
NCLP25_ _ R015TRF
NCLP25_ _ R020TRF
NCLP25_ _ R027TRF
NCLP25_ _ R030TRF
NCLP25_ _ R033TRF
NCLP25_ _ R050TRF
NCLP25_ _ R060TRF
Resistance
Value (mΩ)
1.0
1.1
2.0
3.0
5.0
7.0
8.0
10
15
20
27
30
33
50
60
Available
Power Ratings
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
1W (C), 1.5W (D), 2W (E), 3W (G)
Available
Tolerance
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
Available
TCR
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
NCLP25 (1W, 1.5W and 2W, 2512 CASE SIZE) AVAILABLE VALUES (Fe-Al-Cr)
Part Number
NCLP25_ _ R120TRAF
NCLP25_ _ R130TRAF
NCLP25_ _ R140TRAF
NCLP25_ _ R150TRAF
NCLP25_ _ R180TRAF
NCLP25_ _ R200TRAF
NCLP25_ _ R220TRAF
NCLP25_ _ R240TRAF
NCLP25_ _ R270TRAF
NCLP25_ _ R280TRAF
NCLP25_ _ R300TRAF
NCLP25_ _ R400TRAF
NCLP25_ _ R500TRAF
Resistance
Value (mΩ)
120
130
140
150
180
200
220
240
270
280
300
400
500
Available
Power Ratings
1W (C), 1.5W (D), 2W (E)
1W (C), 1.5W (D), 2W (E)
1W (C), 1.5W (D), 2W (E)
1W (C), 1.5W (D), 2W (E)
1W (C), 1.5W (D), 2W (E)
1W (C), 1.5W (D), 2W (E)
1W (C), 1.5W (D), 2W (E)
1W (C), 1.5W (D), 2W (E)
1W (C), 1.5W (D), 2W (E)
1W (C), 1.5W (D), 2W (E)
1W (C), 1.5W (D), 2W (E)
1W (C), 1.5W (D), 2W (E)
1W (C), 1.5W (D), 2W (E)
Available
Tolerance
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
±1% (F), ±2% (G), ±5% (J)
Available
TCR
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
±75ppm
Percentage of Power Rating
Power Derating Curve: For operation above 70°C, power rating must be
derated according to the following chart:
100%
80%
60%
40%
20%
-55
+70
+170
Temperature °C
3
NIC COMPONENTS CORP. www.niccomp.com
www.lowESR.com
www.RFpassives.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
www.SMTmagnetics.com
Current Sensing Chip Resistors
NCLP Series
DIMENSIONS AND PART MARKING
Case Size
R < 4mW
2512
R > 4mW
L
W
T
6.4 ± 0.2
3.2 ± 0.2
0.7 ± 0.2
P
2.0 ± 0.2
0.9 ± 0.2
Marking for Values < 4mW
Ni-Cu
Marking for Values > 4mW
Mn-Cu
R004
R004
W
L
R020
W
L
P
T
P
P
2512
A
B
C
1mW ~ 3mW
1.3
3.1
4.0
4mW ~ 500mW
4.1
2.1
4.0
T
P
RECOMMENDED LAND PATTERN DIM. (mm)
Case Size
W
L
T
P
R020
W
L
T
P
Mn-Cu
Ni-Cu/Fe-Al-Cr
P
P
RECOMMENDED REFLOW
SOLDERING TEMPERATURE PROFILE
300
Peak Temperature 260°C
250
10 sec.
230°C, 40 sec. max.
200
150
150°C ~ 180°C
120 Sec.
100
Sensing
Trace
C
50
0
B
B
A
EMBOSSED PLASTIC TAPE DIMENSIONS (mm)
K
2512
3.6 ± 0.2
6.9 ± 0.2
1.25 ± 0.15
P
F
D0
D1
W
Quantity
per Reel
5.5 ± 0.05
1.5 +0.1/-0
1.5 min.
12.0 ± 0.2
4,000
E
P1
4.0 ± 0.05 4.0 ± 0.1 1.75 ± 0.1
P
D0
B
D1
W
B
E
A
F
Case
Size
A
K
4
NIC COMPONENTS CORP. www.niccomp.com
www.lowESR.com
P1
www.RFpassives.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
www.SMTmagnetics.com