Tongue Separator Series 1510 Union Nut Connection Application ounting to Bourdon tube pressure gauges or to M pressure transmitters, for connection to measuring points with external thread. Designed for pressure measurements for which the diaphragm separators of Series 1060 can not be employed. The flow of the medium can damage the tongue separator. This must be taken into consideration when determining the measuring point. Execution The separator is inseparably fixed with the pressure measuring instrument to a hydraulic measuring unit, either directly, via a cooling element or via a capillary tube of stainless steel. Type of construction Tongue separator, diaphragm with longitudinal starshaped profile, all parts made of stainless steel, welded. Connection Union Nut Temperature of medium Up to 80 °C, other temperature limits on request Hydraulic transmission fluid Glycerin for direct mounting Almond oil (sweet) for capillary tube, others on request Selection chart Type Material of separator body Material of diaphragm tube Material of bottom piece Tongue separator Stainless steel 1.4571 Stainless steel 1.4571 G 1 Stainless steel 1.4571 G 3/4 Stainless steel 1.4571 1513 Capillary tube 1.4571 Stainless steel 1.4571 Length m 0,5 1 1,5 2 2,5 3 3,5 4,0 Ordering code 1205 1210 1215 1220 1225 1230 1235 1240 Additional metallic protection hose for capillary tube Temperature of medium (e. g. 100 °C) Ordering example: Union nut Ordering code 1511 1299 9007/0100 DRO 100/811.133/075 / 1512 / 1210 / 1299 / 9007/0100 www.baumer.com Design and specifications subject to change without notice Temperature of medium 100 °C metallic protection hose Capillary tube 1 m Separator ordering code Pressure gauge (see data-sheet D1.131) Data-sheet A 41 D1.226 Page 1 Dimensions Dimension drawing Dimention chart G g øD ød S Sealing ring G1 G 1/2 30 24 41 A25 x 30 DIN 7603 G 3/4 G 1/4 25 18 36 A18 x 24 DIN 7603 d G 83 S 19 14 25 D g UK/2009-10-01 This data-sheet may only be reproduced in full. Ø 15 Pressure ranges (directive values) Mounting to pressure gauge or pressure Transmitter NS 63 2) NS 80 NS 100 NS 160 Transmitter 4...1000 Pressure ranges [bar} with union nut connection G 1 2,5...400 2,5...400 6...1000 10...1000 G 3/4 2,5...100 2,5...400 6...1000 – 2) Only possible with transition piece G 1/4 female and G 1/2 male www.baumer.com Design- und Spezifikationsänderungen vorbehalten Data-sheet A 41 D1.226 Seite 2