Conical Sensor, Pt100 Hygienic, without gasket Compact mounting Fast response time High accuracy Wide temperature range Acid-proof, stainless steel Description The wetted parts of the conical sensor are in acid-proof stainless steel. The conical sensor is ideal for measuring temperature in pipe systems The sensor is available as a cable sensor with high-flexible, 4-wire and tanks. The sensor mounting is hygienic and without gasket in a silicone cable. male nipple part welded into the pipe or the tank wall. The welding nipple is available in both flat and curved versions. www.baumer.com Design and specifications subject to change without notice Data Sheet 2903-1 Page 1 Technical Data Sensor Cable Sensor tube Acid-proof stainless steel AISI 316L (W 1.4404) Type High-flexible silicone, grey Wires 4 (2 x Red, 2 x white) Time constant τ0,5 < 1.0 sec., measured in liquids 0.4 m/sec. Environmental conditions Media pressure < 25 bar (water flow 3 m/sec.) Media temperature -50...205°C Element type Pt100, Class A or B Ambient temperature -50...205°C DIN/EN/IEC 60751 Marking label -30...105°C 1/1 DIN B: ±(0.3 + 0.005 x t) °C Humidity < 95% RH, condensing 1/3 DIN B: ±1/3 x (0.3 + 0.005 x t) °C Protection class IP 65 1/6 DIN B: ±1/6 x (0.3 + 0.005 x t) °C Vibrations GL, test 2 1/1 DIN A: ±(0.15 + 0.002 x t) °C Mechanical tolerances ISO 2768-m 20 mm/25 mm Disposal of product and packing Accuracy Sensor length According to national laws or by returning to Baumer Dimensional Drawings Rotating female nut G1/8“ Red ø6 ø3 UK/2011-01-11 This data sheet may only be reproduced in full. [mm] Red White AF13 5 White Flex, Bending radius min. R50 8 (T) 65 Cable length (L) + 20 mm G1/8“ R1“ ø50 ø16 ø16 Ordering Details - Conical Pt100 Cable Sensor 8155 xx Tip length (T) 20 mm 25 mm As customer specification (Max. 25 mm) 5´ digit Pt100 element (DIN/EN/IEC 60751) 1/1 DIN B 1/1 DIN A 1/3 DIN B 1/6 DIN B 6´ digit xxxx 2 3 S 2 3 4 5 Cable length (L) Length in cm 7...10´ digit xxxx Accessories Welding nipple, male Welding nipple, male Welding nipple, male Blind plug G 1/8, R=1" G 1/8, flat, ø16 mm G 1/8, flat, ø50 mm www.baumer.com Design and specifications subject to change without notice Type no. Type no. Type no. Type no. 81 55-291 81 55-292 81 55-294 81 55-293 Data Sheet 2903-1 Page 2