M1 Series 5x7 mm, 5.0 Volt, HCMOS/TTL Compatible Output, Clock Oscillator Features: • Leadless Chip Carrier (LCC) package • Seam sealed package • Tri-state function option • Stabilities to ±20 ppm • Fully RoHS 6 compliant Applications: • Microprocessors/Controllers, DSP • Gig E, SONET • Industrial Controllers • Broadband Access • Test & Measurement Equipment Electrical Specifications PARAMETER Frequency Range Operating Temperature Storage Temperature Frequency Stability Aging st 1 Year Thereafter (per year) Input Voltage Input Current Symbol F TA TS F/F Vdd Idd Output Type Load 1.500 to 50 MHz 50.001 to 67 MHz 67.001 to 125 MHz Symmetry (Duty Cycle) Logic “1” Level Voh Logic “0” Level Vol Output Current Rise/Fall Time Tr/Tf Tristate Function Environmental Start up Time Random Jitter Mechanical Shock Vibration Hermeticity Thermal Cycle Solderability Max Soldering Conditions Rj Min. Typ. Max. 1.5 125 (See ordering information) -55 +125 (See ordering information) 4.5 ±3 ±2 5.0 5.5 20 35/45 65 Units MHz Condition/Notes See Note 1 °C ppm ppm V mA mA mA 50/10 pF/TTL 50 pF 15 pF (See ordering information) 90% Vdd V Vdd –0.5 V 10% Vdd V 0.5 V mA ±16 10 ns 3 ns Input Logic “1” or floating; output active Input Logic “0”; output disables to high-Z 10 ms 5 12 ps RMS 1.5000 to 20.000 MHz 20.001 to 60.000 MHz 50.001 to 125.000 MHz HCMOS/TTL Compatible See Note 2 ½ Vdd HCMOS Load TTL Load HCMOS Load TTL Load See Note 3 1.5000 to 67.000 MHz 67.001 to 125.000 MHz 1-Sigma Per MIL-STD-202, Method 213, Condition C (100 g’s, 6 mS duration, ½ sinewave) Per MIL-STD-202, Method 201 & 204 (10 g’s from 10-2000 Hz) Per MIL-STD-202, Method 112, (1x10-8 atm. cc/s of Helium) Per MIL-STD-883, Method 1010, Condition B (-55°C to +125°C, 15 min. dwell, 10 cycles) Per EIAJ-STD-002 See solder profile, Figure 1 1. Consult factory for availability of higher frequencies. 2. HCMOS Load - See Load circuit diagram. Consult factory with nonstandard output load requirements. 3. Rise/Fall times are measured between 0.5 V and 2.4 V with TTL load, and between 10% Vdd and 90% Vdd with HCMOS load. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Revision: 12-29-10 M1 Series 5x7 mm, 5.0 Volt, HCMOS/TTL Compatible Output, Clock Oscillator Load Circuit Diagram DUT Output Test Point C Load Note: C Load includes probe and fixturing. Pin Connections PIN Function 1 N/C or Tristate 2 Ground 3 Output 4 +Vdd MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. MtronPTI Lead Free Solder Profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.