M2 Series 5x7 mm, 3.3 Volt, HCMOS/TTL Compatible Output, Clock Oscillator Features: • Leadless Chip Carrier (LCC) package • Seam sealed package • Tri-state or Standby function options • Stabilities to ±20 ppm • Fully RoHS 6 compliant Applications: • Microprocessors/Controllers, DSP • Gig E, SONET • Industrial Controllers • Broadband Access • Test & Measurement Equipment Electrical Specifications PARAMETER Frequency Range Operating Temperature Storage Temperature Frequency Stability Aging st 1 Year Thereafter (per year) Input Voltage Input Current Vdd Idd Standby Current Output Type Load Symmetry (Duty Cycle) Logic “1” Level Voh Logic “0” Level Vol Output Current Rise/Fall Time Tr/Tf Standby/Tristate Function Environmental Symbol F TA TS F/F Start up Time Random Jitter Mechanical Shock Vibration Hermeticity Thermal Cycle Solderability Soldering Conditions Min. 1.5 -55 3.0 Typ. Max. Units 135 MHz (See ordering information) +125 °C (See ordering information) ±3 ±2 3.3 3.6 10 20 30 55 10 ppm ppm V mA mA mA mA µA 15/2 PF/TTL (See ordering information) 90% Vdd V Vdd -0.5 V 10% Vdd V 0.5 V mA ±4 Condition/Notes See Note 1 1.500 to 20.000 MHz 20.001 to 50.000 MHz 50.001 to 67.000 67.001 to 135.000 MHz “Q” Output Type Only HCMOS/TTL Compatible See Note 2 ½ Vdd HCMOS Load TTL Load HCMOS Load TTL Load See Note 3 6 ns 1.500 to 50.000 MHz 4 ns 50.001 to 80.000 MHz 2 ns 80.001 to 135.000 MHz Input Logic “1” or floating: output active Input Logic “0”; output disables to high-Z 10 ms Rj 4 10 ps RMS 1-Sigma Per MIL-STD-202, Method 213, Condition C (100 g’s, 6 mS duration, ½ sinewave) Per MIL-STD-202, Method 201 & 204 (10 g’s from 10-2000 Hz) -8 Per MIL-STD-202, Method 112, (1x10 atm. cc/s of Helium) Per MIL-STD-883, Method 1010, Condition B (-55°C to +125°C, 15 min. dwell, 10 cycles) Per EIAJ-STD-002 See solder profile, Figure 1 1. Consult factory for availability of higher frequencies. 2. HCMOS Load - See Load circuit diagram. Consult factory with nonstandard output load requirements. 3. Rise/Fall times are measured between 0.5 V and 2.4 V with TTL load, and between 10% Vdd and 90% Vdd with HCMOS load. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Revision:12-21-10 M2 Series 5x7 mm, 3.3 Volt, HCMOS/TTL Compatible Output, Clock Oscillator Load Circuit Diagram DUT Output Test Point C Load Note: C Load includes probe and fixturing. Pin Connections PIN Function 1 N/C, Tristate or Standby 2 Ground 3 Output 4 +Vdd MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. MtronPTI Lead Free Solder Profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.