M6029 and M6030 Series 5x7 mm, 3.0 Volt, Clipped Sinewave, TCXO/TCVCXO Miniature Size Ideal for handheld and portable devices DENOTES PIN 1 Electrical Specifications Pin Connections Environmental • • PARAMETER Frequency Range Operating Temperature Storage Temperature Frequency Stability Aging 1st Year Thereafter (per year) Control Voltage Tuning Range Input Voltage Input Current Output Type Load Output Level Start up Time Phase Noise (Typical) Symbol F TA TS ǻF/F Min. Typ. Max. 12.6 26 (See Ordering Information) -30 +75 (See Ordering Information) Vc -1 -1 0.5 ±5 2.85 Vdd Idd 0.8 1.5 3.0 +1 +1 2.5 ±15 3.15 2.5 10 ohms || 10pF 100 Hz -80 5 100 Hz -110 1 kHz -130 Units MHz Condition/Notes qC ppm ppm V ppm/V V mA @25qC @25qC M6030 M6030 V ms 10 kHz -145 pk-pk Shock MIL-STD-202, Method 213, Condition C Vibration MIL-STD-202, Method 201 & 204 Solderability Max Soldering Conditions EIAJ-STD-002 See solder profile, Figure 1 Clipped Sinewave Offset from carrier dBc/Hz 100 g 10 g from 10 to 2000 Hz Clipped Sinewave Load – see load circuit diagram #7. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Revision: 3-13-08 MtronPTI Lead Free Solder Profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.