MHO+ Series 14 pin DIP, 5.0 Volt, HCMOS/TTL, Clock Oscillator This product is not recommended for new designs Features: • Standard 14 DIP Package • RoHS Compliant Version Available (-R) • Tristate Option • Wide Operating Temperature Range Pin Connections Electrical Specifications PARAMETER Frequency Range Operating Temperature Storage Temperature Frequency Stability Aging 1st Year Thereafter (per year) Input Voltage Input Current Symbol F TA TS ∆F/F Vdd Idd Symmetry (Duty Cycle) Logic “1” Level Voh Logic “0” Level Vol Rise/Fall Time 4.5 Max. Units 80 MHz (See ordering information) +125 °C (See ordering information) ±3 ±2 5.0 5.5 15 25 60 ppm ppm V mA mA mA Start up Time Random Jitter 5 TTL or 50 pF 10 TTL or 50 pF 10 TTL or 15 pF (See ordering information) 90% Vdd V Vdd-0.5 V 10% Vdd V 0.5 V ±8 mA ±16 mA Tr/Tf Tristate Function Environmental -55 Typ. Output Type Load Output Current Available Symmetry Min. .732 kHz Rj 20 ns 10 ns Input Logic “1” or floating: output active Input Logic “0”: output to high-Z 10 ms 5 12 ps RMS Condition/Notes See Note 1 .732 kHz to 2.999 MHz 3.000 to 25.999 MHz 26.000 to 80.000 MHz HCMOS/TTL See Note 2 .732 kHz to 2.999 MHz 3.000 to 25.999 MHz 26.000 to 80.000 MHz See Note 3 HCMOS Load TTL Load HCMOS Load TTL Load .732 kHz to 2.999 MHz 3.000 to 80.000 MHz See Note 4 .732 kHz to 2.999 MHz 3.000 to 80.000 MHz 1-Sigma Mechanical Shock Vibration Thermal Cycle Hermeticity Solderability MIL-STD-202, Method 213, C (100 g’s) MIL-STD-202, Method 201 & 204 (10 g’s from 10-2000 Hz) MIL-STD-883, Method 1010, B (-55°C to +125°C, 15 min dwell, 10 cycles) MIL-STD-202, Method 112 Per EIAJ-STD-002 Max Wave Soldering Conditions +260°C for 10 seconds 1. Contact the factory for availability of higher frequencies. 2. TTL load - see Load Circuit Diagram #1. HCMOS load - see Load Circuit Diagram #2. 3. Symmetry is measured at 1.4 V with TTL load and at 50% Vdd with HCMOS load. 4. Rise/fall times are frequency dependent and measured between 0.4 V and 2.4 V with TTL load, and between 10% Vdd and 90% Vdd with HCMOS Load. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Revision: 11-11-10