Specification for the MtronPTI XO550x Series Low G Sensitivity OCXO Electrical Specifications: Parameter Nominal Frequency Initial Set-On Frequency Symbol F FO Min. 10.000 -20 vs. Temperature vs. Supply Voltage vs. Load FT/F FVDD/F FVDD/F -10 -5 -5 Typ. Max. 30.000 +20 Frequency Stabilities +10 +5 +5 Units MHz ppb ppb ppb ppb -11 Short Term Stability 2 x 10 Aging (After 30 days continuous operation) Output Type Output Output Load Output VSWR -0.5 +0.5 ppb -100 +100 ppb -160 +160 ppb +9.0 55 1.5:1 Frequency Adjustment Voltage Tuned 0 +5.0 ±1.0 ±3.0 +4.8 +5.2 dBm Ω +5.0 45 Method Tuning Voltage Tuning Range Reference Voltage Reference Voltage Source Load Tuning Slope VTUNE VREF RF Output Sinewave +7.0 50 1.0 Positive Additional Parameters -30 -80 0.2 Harmonics Spurious G-Sensitivity Phase Noise (10MHz) (under Operational Vibration conditions) @ 25°C after warm-up Note 1 Over the OTR 5% change in voltage 10% change in Load Allan Variance Tau = 1 sec., under static conditions Daily Aging, @ Time of Shipment st 1 Year Aging 20 Years Aging, With Adjustment Any Phase VDC ppm VDC Consult Factory for Additional Options kΩ dBc dBc ppb/G 5 Minutes 30 Minutes -120 -143 -150 -155 -98 -118 -124 -138 -143 -155 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Warm-up Times Phase Noise (10MHz) (under static conditions) Conditions 10Hz to 500Hz, Any Axis Time to be within ±0.1 ppm of the frequency after 1 hour of operation @ 25°C Time to be within full specification compliance @ 10Hz Offset @ 100Hz Offset @ 1kHz Offset @ 10kHz Offset @ 10Hz Offset @ 50Hz Offset @ 100Hz Offset @ 500Hz Offset @ 1kHz Offset @ 10kHz – 1MHz Offset Note 1: Tune voltage at set-on frequency within limits shall be 2 to 3 volts inclusive. 1 of 2 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. Specification for the MtronPTI XO550x Series Low G Sensitivity OCXO Parameter Symbol Operating Voltage VDD Min. Typ. Max. Temperature and Supply Voltage +5.0 Power Consumption (Over the OTR) Units +12.0 VDC 3.0 7.0 Watts Watts +70 +85 °C °C Conditions Consult Factory for Additional Options Steady state @ 25°C @ Warm-up Environmental Conditions: Temperature Operating Temperature Storage Temperature Mechanical Shock (survival) Vibration (survival) Random Vibration (Operational) Solderability OTR STR -15 -55 Consult Factory for Additional Options Per MIL-STD-202, Method 213, (2000 g’s, 0.3 m s duration, ½ sinewave) Per MIL-STD-202, Method 201 & 204 (10 g’s from 20-2000 Hz) 2 10Hz to 40Hz: 0.00075G /Hz 2 50Hz to 500Hz: 0.00125G /Hz 2 1kHz: 0.00030G /Hz 2 2kHz to 40Hz: 0.0010G /Hz Per EIAJ-STD-002 Mechanical, Marking and Layout Information: Line 1 Line 2 Line 3 Line 4 Line 5 Part Marking MtronPTI ‘Model Number’ ‘Center Frequency’ Serial Number Date Code yy ww Legend Year Work Week Pin 1 2 3 7 8 9 10 16 Function VTUNE (Optional) N/C N/C VREF (Optional) Ground Ground RF Output Supply Voltage Data Sheet Revision Table: Date 05/15/14 Rev. A Orig. BRM Details of Revision Original Release. 2 of 2 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI.