Specification for a Sinewave Output 160MHz OCXO MtronPTI P/N: XO5085-160MHz Ultra-Low Phase Noise, High Stability and Low Aging Custom options available: Phase Noise, g-sens (<0.5ppb/ g worst case axis) Supports custom shock and vibe profiles Applications: RADAR and Satcom Electrical Specifications: Parameter Nominal Frequency vs. Temperature vs. Supply voltage variation 1 Year Aging 10-Years Aging Symbol FO Min. FT/F -150 Typ. Max. 160.000000 Frequency Stabilities -30 -1.0 -10.0 Output Type Output Level Output Load Adjustment Method Adjustment Voltage Adjustment Range Adjustment Slope VTUNE Phase Noise (Under Static Conditions) G-sensitivity Harmonics Spurious Units MHz +150 ppb +30 ppb +1.0 +10.0 ppm ppm RF Output Sinewave +8 +10 +12 dBm 50 Ω Frequency Adjustment External Voltage 0 +10 VDC Sufficient for all causes over 10-years Positive Additional Parameters -85 dBc/Hz -120 dBc/Hz -145 dBc/Hz -163 dBc/Hz -170 dBc/Hz -175 dBc/Hz -175 dBc/Hz 1.0 ppb/g -25 dBc -80 dBc Warm-up Time 5 minutes Operating Temperature Temperature, Supply Voltage & Power Consumption OTR -40 +85 °C Storage Temperature Operating Voltage STR VCC -55 +11.75 +12.0 +95 +12.25 °C VDC Conditions Over the Operating Temperature Range +/-250mV change in supply voltage ±10% Over all conditions 10Hz Offset 100Hz Offset 1kHz Offset 10kHz Offset 100kHz Offset 1MHz Offset 10MHz Offset To within ±0.1ppm of the frequency after 1-hour of operation @ 25°C Full Specification Compliance 1 of 3 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. Specification for a Sinewave Output 160MHz OCXO MtronPTI P/N: XO5085-160MHz 1.5 Power Consumption Environmental Conditions: Seal RoHS Vibration (survival) Shock (survival) Solderability 4.0 Watts Watts Steady state @ 25°C, In Still Air @ Warm-up Hermetic * Full RoHS Compliance Per MIL-STD 202G, Method 204, Condition A Per MIL-STD 202G, Method 213, Condition C Per EIAJ-STD-002 *: No pure tin and other material requirements supported Representative Phase Noise Plot: 2 of 3 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. Specification for a Sinewave Output 160MHz OCXO MtronPTI P/N: XO5085-160MHz Mechanical, Marking and Layout Information: Line 1 Line 2 Line 3 Line 4 Line 5 Part Marking MtronPTI XO5085-0XXR 160.0000MHz Serial Number Date Code yy ww Legend Year Work Week Pin 1 2 3 4 5 Function RF Output Case Ground VTUNE N/C Supply Voltage Data Sheet Revision Table: Date 04-12-16 Rev. A Orig. DPD Details of Revision Original release 3 of 3 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI.