Specification for a Low G Sensitivity OCXO MtronPTI P/N: XO5501-001 Electrical Specifications: Parameter Symbol Min. Nominal Frequency F Initial Set-On Frequency FO -20 FT/F FVDD/F FVDD/F -10 -5 -5 vs. Temperature vs. Supply Voltage vs. Load Typ. Max. 10.000 Units MHz +20 Frequency Stabilities +10 +5 +5 ppb ppb ppb ppb -11 Short Term Stability 2 x 10 Aging (After 30 days continuous operation) Output Type Output Output Load Output VSWR -0.5 +0.5 ppb -100 +100 ppb -160 +160 ppb +9.0 55 1.5:1 Frequency Adjustment Voltage Tuned 0 +5.0 ±1.0 ±3.0 +4.8 +5.2 dBm Ω +5.0 45 Method Tuning Voltage Tuning Range Reference Voltage Reference Voltage Source Load Tuning Slope VTUNE VREF RF Output Sinewave +7.0 50 1.0 Positive Additional Parameters -30 -80 0.2 Harmonics Spurious G-Sensitivity Phase Noise (10MHz) (under Operational Vibration conditions) Over the OTR 5% change in voltage 10% change in Load Allan Variance Tau = 1 sec., under static conditions Daily Aging, @ Time of Shipment st 1 Year Aging 20 Years Aging, With Adjustment Any Phase VDC ppm VDC Consult Factory for Additional Options kΩ dBc dBc ppb/G 5 Minutes 30 Minutes -120 -143 -150 -155 -98 -118 -124 -138 -143 -155 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Warm-up Times Phase Noise (10MHz) (under static conditions) Conditions Consult Factory for Other Frequencies (10–30MHz) Note 1 @ 25°C after warm-up 10Hz to 500Hz, Any Axis Time to be within ±0.1 ppm of the frequency after 1 hour of operation @ 25°C Time to be within full specification compliance @ 10Hz Offset @ 100Hz Offset @ 1kHz Offset @ 10kHz Offset @ 10Hz Offset @ 50Hz Offset @ 100Hz Offset @ 500Hz Offset @ 1kHz Offset @ 10kHz – 1MHz Offset Note 1: Tune voltage at set-on frequency within limits shall be 2 to 3 volts inclusive. 1 of 2 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. Specification for a Low G Sensitivity OCXO MtronPTI P/N: XO5501-001 Parameter Symbol Operating Voltage Min. Typ. Max. Temperature and Supply Voltage VDD 12.0 Power Consumption (Over the OTR) Units Conditions Consult Factory for Additional Supply Options Steady state @ 25°C @ Warm-up VDC 3.0 7.0 Watts Watts +70 +85 °C °C Environmental Conditions: Temperature Operating Temperature Storage Temperature Mechanical Shock (survival) Vibration (survival) Random Vibration (Operational) Solderability OTR STR -15 -55 Consult Factory for Additional OTR Options Per MIL-STD-202, Method 213, (2000 g’s, 0.3 m s duration, ½ sinewave) Per MIL-STD-202, Method 201 & 204 (10 g’s from 20-2000 Hz) 2 10Hz to 40Hz: 0.00075G /Hz 2 50Hz to 500Hz: 0.00125G /Hz 2 1kHz: 0.00030G /Hz 2 2kHz to 40Hz: 0.0010G /Hz Per EIAJ-STD-002 Mechanical, Marking and Layout Information: Line 1 Line 2 Line 3 Line 4 Line 5 Part Marking MtronPTI XO5501-001 10.000000 Serial Number Date Code yy ww Legend Year Work Week Pin 1 2 3 7 8 9 10 16 Function VTUNE (Optional) N/C N/C VREF (Optional) Ground Ground RF Output Supply Voltage Data Sheet Revision Table: Date 05/15/14 Rev. A Orig. BRM Details of Revision Original Release. 2 of 2 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI.