DS3106 Reliability Report

11/14/2007
PRODUCT RELIABILITY REPORT
FOR
DS3106, Rev A2
Maxim Integrated Products
4401 South Beltwood Parkway
Dallas, TX 75244-3292
Prepared by:
Ken Wendel
Reliability Engineering Manager
Maxim Integrated Products
4401 South Beltwood Pkwy.
Dallas, TX 75244-3292
Email : [email protected]
ph: 972-371-3726
fax: 972-371-6016
mbl: 214-435-6610
Conclusion:
The following qualification successfully meets the quality and reliability standards required of all
Maxim products:
DS3106, Rev A2
In addition, Maxim's continuous reliability monitor program ensures that all outgoing product will
continue to meet Maxim's quality and reliability standards. The current status of the reliability monitor
program can be viewed at http://www.maxim-ic.com/TechSupport /dsreliability.html.
Device Description:
A description of this device can be found in the product data sheet. You can find the product data
sheet at http://dbserv.maxim-ic.com/l_datasheet3.cfm.
Reliability Derating:
The Arrhenius model will be used to determine the acceleration factor for failure mechanisms that
are temperature accelerated.
AfT = exp((Ea/k)*(1/Tu - 1/Ts)) = tu/ts
AfT = Acceleration factor due to Temperature
tu = Time at use temperature (e.g. 55°C)
ts = Time at stress temperature (e.g. 125°C)
k = Boltzmann’s Constant (8.617 x 10-5 eV/°K)
Tu = Temperature at Use (°K)
Ts = Temperature at Stress (°K)
Ea = Activation Energy (e.g. 0.7 ev)
The activation energy of the failure mechanism is derived from either internal studies or industry
accepted standards, or activation energy of 0.7ev will be used whenever actual failure mechanisms
or their activation energies are unknown. All deratings will be done from the stress ambient
temperature to the use ambient temperature.
An exponential model will be used to determine the acceleration factor for failure mechanisms,
which are voltage accelerated.
AfV = exp(B*(Vs - Vu))
AfV = Acceleration factor due to Voltage
Vs = Stress Voltage (e.g. 7.0 volts)
Vu = Maximum Operating Voltage (e.g. 5.5 volts)
B = Constant related to failure mechanism type (e.g. 1.0, 2.4, 2.7, etc.)
The Constant, B, related to the failure mechanism is derived from either internal studies or industry
accepted standards, or a B of 1.0 will be used whenever actual failure mechanisms or their B are
unknown. All deratings will be done from the stress voltage to the maximum operating voltage.
Failure rate data from the operating life test is reported using a Chi-Squared statistical model at the
60% or 90% confidence level (Cf).
The failure rate, Fr, is related to the acceleration during life test by:
Fr = X/(ts * AfV * AfT * N * 2)
X = Chi-Sq statistical upper limit
N = Life test sample size
Failure Rates are reported in FITs (Failures in Time) or MTTF (Mean Time To Failure). The FIT
rate is related to MTTF by:
MTTF = 1/Fr
NOTE: MTTF is frequently used interchangeably with MTBF.
The calculated failure rate for this device/process is:
FAILURE RATE:
MTTF (YRS):
70460
FITS:
1.6
DEVICE HOURS:
599640
FAILS:
0
Only data from Operating Life or similar stresses are used for this calculation.
The parameters used to calculate this failure rate are as follows:
Cf: 60%
Ea: 0.7
B: 0
Tu: 25
°C
Vu: 5.5
Volts
The reliability data follows. At the start of this data is the device information. The next section is the
detailed reliability data for each stress. The reliability data section includes the latest data available and
may contain some generic data. "*" after DATE CODE denotes specific product data and SEQ No. to
identify specific line items in the report for comments when required.
Device Information:
Process:
Passivation:
Die Size:
Number of Transistors:
Interconnect:
Gate Oxide Thickness:
TSMC Fab8B 0.18um Logic General Purpose 1P6M Salicide 1.8V/3.3V,
Phase II
Laser/TEOS Ox - Pass/Nit -PreLP+GenLP
196 x 196
0
Aluminum / 0.5% Copper
32 Å
ELECTRICAL CHARACTERIZATION
DESCRIPTION
DATE CODE/SEQ CONDITION
READPOINT
QTY FAILS
FA#
ESD SENSITIVITY
0705
EOS/ESD S5.1 HBM 500 VOLTS
1
PUL'S
3
0
ESD SENSITIVITY
0705
EOS/ESD S5.1 HBM 1000 VOLTS
1
PUL'S
3
0
ESD SENSITIVITY
0705
EOS/ESD S5.1 HBM 2000 VOLTS
1
PUL'S
3
1
No FA
ESD SENSITIVITY
0705
EOS/ESD S5.1 HBM 4000 VOLTS
1
PUL'S
3
3
No FA
ESD SENSITIVITY
0705
EOS/ESD S5.1 HBM 8000 VOLTS
1
PUL'S
3
3
No FA
ESD SENSITIVITY
0705
EOS/ESD S5.1 HBM 1500 VOLTS
1
PUL'S
3
0
ESD SENSITIVITY
0705
EOS/ESD S5.1 HBM +/- 2200 VOLTS
1
PUL'S
1
0
ESD SENSITIVITY
0705
EOS/ESD S5.1 HBM + 2000 VOLTS
(POSITIVE ONLY)
1
PUL'S
1
0
ESD SENSITIVITY
0705
EOS/ESD S5.1 HBM - 2000 VOLTS
(NEGATIVE ONLY)
1
PUL'S
1
0
ESD SENSITIVITY
0705
EOS/ESD S5.1 HBM 2000 VOLTS
1
PUL'S
1
0
ESD SENSITIVITY
0705
EOS/ESD S5.1 HBM 2000 VOLTS
1
PUL'S
1
0
ESD SENSITIVITY
0705
EOS/ESD S5.1 HBM 2000 VOLTS
1
PUL'S
1
0
LATCH-UP
0711
JESD78, I-TEST 125C
3
0
LATCH-UP
0711
JESD78, V-SUPPLY TEST 125C
3
0
ESD SENSITIVITY
0731
*1
EOS/ESD S5.1 HBM 500 VOLTS
1
PUL'S
3
0
ESD SENSITIVITY
0731
*2
EOS/ESD S5.1 HBM 1000 VOLTS
1
PUL'S
3
0
ESD SENSITIVITY
0731
*3
EOS/ESD S5.1 HBM 2000 VOLTS
1
PUL'S
3
2
No FA
ESD SENSITIVITY
0731
*4
EOS/ESD S5.1 HBM 4000 VOLTS
1
PUL'S
3
3
No FA
ESD SENSITIVITY
0731
*5
EOS/ESD S5.1 HBM 8000 VOLTS
1
PUL'S
3
3
No FA
LATCH-UP
0731
*6
JESD78, I-TEST 125C
6
0
LATCH-UP
0731
*7
JESD78, V-SUPPLY TEST 125C
6
0
15
Total:
OPERATING LIFE
DESCRIPTION
DATE CODE/SEQ CONDITION
READPOINT
HIGH TEMP OP LIFE
0452
125C, 3.5V (PSA) & 2.0V (PSB)
1000 HRS
45
0
HIGH TEMP OP LIFE
0527
125C, 3.5V (PSA) & 2.0V (PSB)
1000 HRS
45
0
HIGH TEMP OP LIFE
0607
125C, 3.5V (PSA) & 2.0V (PSB)
1000 HRS
45
0
HIGH TEMP OP LIFE
0625
125C, 2.0V (PSA) & 3.5V (PSB)
1000 HRS
45
0
HIGH TEMP OP LIFE
0642
125C, 2.0V (PSA) & 3.5V (PSB)
1000 HRS
45
0
HIGH TEMP OP LIFE
0647
125C, 2.0V (PSB) & 3.5V (PSA)
1000 HRS
45
0
HIGH TEMP OP LIFE
0648
125C, 2.0V (PSB) & 3.5V (PSA)
1000 HRS
45
0
HIGH TEMP OP LIFE
0649
125C, 2.0V (PSB) & 3.5V (PSA)
1000 HRS
45
0
HIGH TEMP OP LIFE
0705
125C, 3.5V (PSA) & 2.0V (PSB)
1000 HRS
45
0
HIGH TEMP OP LIFE
0705
125C, 3.5V (PSA) & 2.0V (PSB)
1000 HRS
48
0
HIGH TEMP OP LIFE
0708
125C, 2.0V (PSA) & 3.5V (PSB)
1000 HRS
45
0
HIGH TEMP OP LIFE
0709
125C, 2.0V (PSB) & 3.5V (PSA)
1000 HRS
48
0
HIGH TEMP OP LIFE
0720
125C, 2.0V (PSB) & 3.5V (PSA)
1000 HRS
45
0
HIGH TEMP OP LIFE
0731
125C, 3.5V (PSA) & 2.0V (PSB)
192
45
0
*1
HRS
Total:
FAILURE RATE:
MTTF (YRS):
70460
FITS:
1.6
DEVICE HOURS:
599640
FAILS:
0
QTY FAILS
0
FA#