Oscilent Corporation PRODUCT SPECIFICATION REV A January 2010 Oscilent Controlled Document Ordering Code / Part Number Product Description 803-RF448.0M-C Wireless, RF SAW Filter Specification Contents o Mechanical Dimensions o Test Circuit o Maximum Ratings o Electrical Specification o Frequency Performance o VSWR o Smith Chart Notes o Electrostatic Sensitive Device (ESD) o Avoid excessive ultrasonic exposure o Solderability compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature o This product complies with EU directive 2002/95/EC (RoHS compliance) Oscilent Corporation Telephone: 1.949.252.0522 Fax: 1.949.252.0522 Email: [email protected] Product Specification www.oscilent.com Oscilent Part Number 803-RF448.0M-C Wireless, RF SAW Filter January 2010 Rev A Mechanical Dimensions (mm) Pin Description A, C, D, F Ground B In E Out Test Circuit Source and Load Impedance: 50 Ω Product Specification P. 1 www.oscilent.com Oscilent Part Number 803-RF448.0M-C Wireless, RF SAW Filter January 2010 Rev A Maximum Ratings Parameters Description Unit Minimum Typical Maximum Operating Temperature Range °C -30 - +65 Storage Temperature Range °C -40 - +85 Maximum DC Voltage V - - 10 Maximum Input Power dBm - - 0 Source Impedance (single ended)(1) Ω - 150 - Load Impedance (single ended)(1) Ω - 150 - Notes: With Matching Network (Ref. Testing Environment Circuit as shown above). Those impedances could be modified with different impedance values and/or structures, if necessary. Electrical Specification Parameters Description Unit Minimum Typical Maximum Center Frequency (Fo) MHz - 448.0 - dB - 1.6 3.5 dBp-p - 0.6 2.0 Fo-200 ~ Fo-42.8 MHz dB 50 55 - Fo+40 ~ Fo+200 MHz dB 50 55 - Insertion Loss within 446 ~ 450 MHz Amplitude Ripple within 446 ~ 450 MHz Attenuation: Product Specification P. 2 www.oscilent.com Oscilent Part Number 803-RF448.0M-C Wireless, RF SAW Filter January 2010 Rev A Frequency Performance Product Specification P. 3 www.oscilent.com