Oscilent Corporation PRODUCT SPECIFICATION REV A January 2011 Oscilent Controlled Document Ordering Code / Part Number Product Description 821-SL160.0M-10B 160.0MHz IF SAW Filter 10.07MHz Bandwidth Specification Contents o Mechanical Dimensions o Test Circuit o Maximum Ratings o Electrical Specification o Frequency Response o Smith Chart o VSWR Notes o Electrostatic Sensitive Device (ESD) o Avoid excessive ultrasonic exposure o Solderability compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature o This product complies with EU directive 2002/95/EC (RoHS compliance) Oscilent Corporation Telephone: 1.949.252.0522 Fax: 1.949.252.0522 Email: [email protected] Product Specification www.oscilent.com Oscilent Part Number 821-SL160.0M-10B 160.0MHz IF SAW Filter 10.07MHz Bandwidth January 2011 Rev A Mechanical Dimensions (mm) Pin Description A, B, C, D, F, G, H, I Ground J Input E Output Test Circuit Test Fixture & Values Input L1=33nH, C1=36pF Output L2=27nH, C2=53pF Source/Load Impedance 50 Ω Product Specification P. 1 www.oscilent.com Oscilent Part Number 821-SL160.0M-10B January 2011 Rev A 160.0MHz IF SAW Filter 10.07MHz Bandwidth Maximum Ratings Parameters Description Unit Minimum Typical Maximum Operating Temperature Range °C 0 - 50 Storage Temperature Range °C -40 - 85 Maximum DC Voltage V - - 10 Maximum Input Power dBm - - 10 Source Impedance (single ended)(1) Ω - 50 - Load Impedance (single ended)(1) Ω - 50 - Notes: With Matching Network (Ref. Testing Environment Circuit as shown above). Those impedances could be modified with different impedance values and/or structures, if necessary. Electrical Specification Parameters Description Unit Minimum Typical Maximum Center Frequency (Fo) MHz - 160.0 - dB - 18.5 22.0 Group Delay Variation (Fo±4.425 MHz) nsec - 62 100 Absolute Delay µsec - 1.45 - dB - 0.35 0.9 Bandwidth at –1.0 dB MHz 8.85 10.07 - Bandwidth at –3.0 dB MHz - 10.6 - Bandwidth at –40.0 dB MHz - 12.8 13.4 Lower Sidelobe dB 40 45 - Upper Sidelobe dB 40 45 - ppm/°C - -20 - Insertion Loss at Fo Passband Ripple (Fo±4.425 MHz) Relative Attenuation Temperature Coefficient Product Specification P. 2 www.oscilent.com Oscilent Part Number 821-SL160.0M-10B January 2011 Rev A 160.0MHz IF SAW Filter 10.07MHz Bandwidth Frequency Response Bandwidth at –1.0 dB Bandwidth at –3.0 dB Bandwidth at –40.0dB Wide Band Product Specification P. 3 www.oscilent.com Oscilent Part Number 821-SL160.0M-10B January 2011 Rev A 160.0MHz IF SAW Filter 10.07MHz Bandwidth Ripple Variation (Fo±4.425 MHz) Group Delay Variation (Fo±4.425 MHz) Smith Chart Product Specification P. 4 www.oscilent.com Oscilent Part Number 821-SL160.0M-10B January 2011 Rev A 160.0MHz IF SAW Filter 10.07MHz Bandwidth VSWR Product Specification P. 5 www.oscilent.com