Oscilent Corporation PRODUCT SPECIFICATION REV A January 2011 Oscilent Controlled Document Ordering Code / Part Number Product Description 835-IF70.0M-30A 70.0 MHz IF SAW Filter 29.08 MHz Bandwidth Specification Contents o Mechanical Dimensions o Test Circuit o Maximum Ratings o Electrical Specification o Frequency Response o Smith Chart Notes o Electrostatic Sensitive Device (ESD) o Avoid excessive ultrasonic exposure o Solderability compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature o This product complies with EU directive 2002/95/EC (RoHS compliance) Oscilent Corporation Telephone: 1.949.252.0522 Fax: 1.949.252.0522 Email: [email protected] Product Specification www.oscilent.com Oscilent Part Number 835-IF70.0M-30A 70.0 MHz IF SAW Filter 29.08 MHz Bandwidth January 2011 Rev A Mechanical Dimensions (mm) Pin Description B, C, D, F Ground A In E Out Test Circuit Test Fixture & Values Input L1 = 180nH, C1 = 2pF Output L2 = 150nH Source/Load Impedance 50 Ω Product Specification P. 1 www.oscilent.com Oscilent Part Number 835-IF70.0M-30A January 2011 Rev A 70.0 MHz IF SAW Filter 29.08 MHz Bandwidth Maximum Ratings Parameters Description Unit Minimum Typical Maximum Operating Temperature Range °C - 25 - Storage Temperature Range °C -40 - 85 Maximum DC Voltage V - - 10 Maximum Input Power dBm - - 10 Source Impedance (single ended)(1) Ω - 50 - Load Impedance (single ended)(1) Ω - 50 - Notes: With Matching Network (Ref. Testing Environment Circuit as shown above). Those impedances could be modified with different impedance values and/or structures, if necessary. Electrical Specification Parameters Description Unit Minimum Typical Maximum Center Frequency (Fo) MHz - 70.0 - dB - 28.1 30.0 Group Delay Variation (Fo±14.42MHz) nsec - 37 70 Absolute Delay at Fo usec - 3.10 - dB - 0.65 - Bandwidth at -1dB MHz - 29.08 - Bandwidth at -3dB MHz - 29.27 - Bandwidth at -40dB MHz - 30.32 - dBc - 27 - Lower Sidelobe dB 50 52 - Upper Sidelobe dB 50 52 - 52.0MHz~54.5MHz dB - 47 - ppm/°C - -72 - Insertion Loss at Fo Passband Ripple Variation (Fo±14.42MHz) Relative attenuation @Fo±15.1MHz Relative Attenuation Temperature Coefficient Product Specification P. 2 www.oscilent.com Oscilent Part Number 835-IF70.0M-30A January 2011 Rev A 70.0 MHz IF SAW Filter 29.08 MHz Bandwidth Frequency Response Bandwidth at –1.0 dB Bandwidth at –40.0 dB Ripple Variation (Fo±14.32MHz) Product Specification Group Delay Variation (Fo±14.32MHz) P. 3 www.oscilent.com Oscilent Part Number 835-IF70.0M-30A January 2011 Rev A 70.0 MHz IF SAW Filter 29.08 MHz Bandwidth Ripple Variation (Fo±14.42MHz) Group Delay Variation (Fo±14.42MHz) Relative Attenuation Product Specification P. 4 www.oscilent.com Oscilent Part Number 835-IF70.0M-30A January 2011 Rev A 70.0 MHz IF SAW Filter 29.08 MHz Bandwidth Smith Chart Product Specification P. 5 www.oscilent.com