Oscilent Corporation PRODUCT SPECIFICATION REV A January 2010 Oscilent Controlled Document Ordering Code / Part Number Product Description 802-RF491.2M-A CDMA 450 F-Band, RF/Rx SAW Filter Specification Contents o Mechanical Dimensions o Test Circuit o Maximum Ratings o Electrical Specification o Frequency Performance o VSWR o Smith Chart Notes o Electrostatic Sensitive Device (ESD) o Avoid excessive ultrasonic exposure o Solderability compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature o This product complies with EU directive 2002/95/EC (RoHS compliance) Oscilent Corporation Telephone: 1.949.252.0522 Fax: 1.949.252.0522 Email: [email protected] Product Specification www.oscilent.com Oscilent Part Number 802-RF491.2M-A CDMA 450 F-Band, RF/Rx SAW Filter January 2010 Rev A Mechanical Dimensions (mm) Pin Description A, C, D, F Ground E In B Out Test Circuit Source and Load Impedance: 50 Ω Product Specification P. 1 www.oscilent.com Oscilent Part Number 802-RF491.2M-A CDMA 450 F-Band, RF/Rx SAW Filter January 2010 Rev A Maximum Ratings Parameters Description Unit Minimum Typical Maximum Operating Temperature Range °C -30 - +80 Storage Temperature Range °C -40 - +85 Maximum DC Voltage V - - 0 Maximum Input Power dBm - - 27 Source Impedance (single ended)(1) Ω - 50 - Load Impedance (single ended)(1) Ω - 50 - Parameters Description Unit Minimum Typical Maximum Center Frequency (Fo) MHz - 491.2 - dB - 2.5 3.5 0.3 ~ 479.0 MHz dB 40 50 - 479.0 ~ 483.5 MHz dB 35 48 - 515.0 ~ 800.0 MHz dB 40 49 - 800.0 ~ 1200 MHz dB 30 43 - 1200 ~ 2000 MHz dB 25 37 - - - 1.5 2.0 Notes: No Matching Network Electrical Specification Insertion Loss within 489.0 ~ 493.5 MHz Attenuation: VSWR within 489.0 ~ 493.5 MHz Product Specification P. 2 www.oscilent.com Oscilent Part Number 802-RF491.2M-A CDMA 450 F-Band, RF/Rx SAW Filter January 2010 Rev A Frequency Performance Product Specification P. 3 www.oscilent.com Oscilent Part Number 802-RF491.2M-A CDMA 450 F-Band, RF/Rx SAW Filter January 2010 Rev A VSWR Smith Chart Product Specification P. 4 www.oscilent.com