OSA Opto Light GmbH Köpenicker Str. 325 / Haus 201 12555 Berlin - Germany Tel. +49 (0)30 65 76 26 83 E-Mail: [email protected] Serie OCL-440 HYG Ceramics green 572nm Features - size 3,8(L) x 3,8(W) x 0,9(H) mm - circuit substrate: AlN Ceramics - devices are ROHS conform - lead free solderable, soldering pads: silver plated - taped in 16 mm blister tape, cathode to transporting perforation - marking at anode - all devices sorted into luminous intensity classes - taping: face-up (T) Electro-Optical Characteristics Measured at 350mA, Ta = 25°C Parameter Symbol Emitting Color Forward Voltage Dominate Wavelength Luminous Intensity VF D IV Type min OCL-440 HYG 710 Values typ green 2.0 572 1000 max 2.6 Units V nm mcd 90 120 1,0 60 0,8 0,6 30 150 0,4 0,2 0,0 180 0 view angle 0,2 0,4 0,6 0,8 1,0 OSA Opto Light GmbH · Tel. +49-(0)30-65762683 · [email protected] 1/6 edition 05/13 Absolute Maximum Ratings Parameter Values Symbol Forward Current Forward Current, pulsed Reverse Voltage Reverse Current Thermal Resistance Operating Temperature Storage Temperature min IF,max IF,p VR IR Rth JC TOp TSt tp ≤ 100µs, = 1:10 -40 -40 max 350 500 5 100 10 +85 +85 Units mA mA V µA K/W °C °C 400 350 300 IF [mA] 250 Maximal forward current (DC) characteristic 200 150 100 50 0 -40 -20 0 20 40 60 80 100 Top[°C] Outline Drawing Recommended Soldering Patterns 1.0 1.6 3.8 3.8 Chip 1.7 3.5 Marking Unit: mm Tolerance: ±0.1 Back Side Marking 3.5 OSA Opto Light GmbH · Tel. +49-(0)30-65762683 · [email protected] 2/6 edition 05/13 Forward Current [mA] 500 50 U F – IF characteristic 5 1,75 1,80 1,85 1,90 1,95 2,00 2,05 Forward Voltage [V] 1 rel Intensity [a.u.] 0,8 0,6 IF – Iv, rel characteristic 0,4 0,2 0 0 50 100 150 200 250 300 350 Forward Current [mA] 1,0 rel Intensity [a.u.] 0,8 0,6 Spectrum @ 350mA 0,4 0,2 0,0 470 490 510 530 550 570 590 610 630 650 670 Wavelength [nm] OSA Opto Light GmbH · Tel. +49-(0)30-65762683 · [email protected] 3/6 edition 05/13 Soldering Conditions 300 10...20s Temperature [°C] 250 230°C 200 170°C IR reflow soldering profile 150 120°C 40s max. 100 3K/s max. 50 4K/s max 0 50 100 150 Time [s] 200 250 300 300 217°C 3K/s max Temperature [°C] 250°C 245°C 250 200 180°C 10...20s IR reflow soldering profile for lead free soldering 60s max 150 120s max 100 4K/s max 50 3K/s max 0 50 100 Manual soldering: 150 Time [s] 200 250 300 max power of iron 25W/ 3s/ 300°C OSA Opto Light GmbH · Tel. +49-(0)30-65762683 · [email protected] 4/6 edition 05/13 Ordering Code For Parts Series Color OCL-440 Encapsulation ????? - ? - Packaging ? T – taped up X – uncoloured clear Type definition, e.g. OCL-440 HYG –X-T LED Luminous Intensity Groups And Subgroups [ mcd ] (general information – not this device specific) Q: 71 - 112 R: 112 - 180 S: 180 - 280 T: 280 - 450 U: 450 - 710 V: 710 - 1120 AW: 1120 - 1800 BW: 1800 - 2800 CW: 2800 - 4500 DW: 4500 - 7100 EW: 7100 - 11 200 Q1 : Q2 : R1 : R2 : S1 : S2 : T1 : T2 : U1 : U2 : V1 : V2 : AA : AB : BA : BB : CA : CB : DA : DB : EA: EB: 71 90 112 140 180 224 280 355 450 560 710 900 1120 1400 1800 2240 2800 3550 4500 5600 7100 9000 - 90 112 140 180 224 280 355 450 560 710 900 1120 1400 1800 2240 2800 3550 4500 5600 7100 9000 11 200 Measured according to CIE 127. All SMD-LEDs are 100% measured and selected on full automated equipment with an accuracy of ± 11 %. Special service: Brightness selection in sub selections possible. Color selection in 3 sub selections possible (each subgroup per reel). OSA Opto Light GmbH · Tel. +49-(0)30-65762683 · [email protected] 5/6 edition 05/13 Tape And Reel Packing D 7’’ Packing: Parts/reel 2000 The reel is sealed in special plastic bag with integrate ESD protection ( MIL - STD 81705 ) including a silica dry-pack MSL level acc. to IPC/JEDEC J-STD 020D: Level 2 for Europe Level 2a for all other countries Label XXXXXXXXX Order No. Customer order No. ?????-??-T Type Intensity group ZZ Color class: CC Charge No. 1122-AAAAAA Quantity 9999 Color class - optional 11 Week – 22 year – A internal identification Attention please: The information describes the type of component and shall not considered as assured characteristics. Terms of delivery and rights to change reserved. Due to technical requirements components may contain dangerous substances. The data sheet may changed without prior information; the valid issue will be on our webpage in internet. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. OSA opto light does not have the responsibility for the reliability and the degradation behaviour of products made with OSA opto light diodes because they depend not only on the diode but also on the conditions of manufacture or design of the final products. Packaging: Please use the recycling operators known to you. Components used in life support devices or systems, toys and safety systems must be expressly authorized for such purpose! OSA Opto Light GmbH · Tel. +49-(0)30-65762683 · [email protected] 6/6