OSA Opto Light GmbH Köpenicker Str. 325 / Haus 201 12555 Berlin - Germany Tel. +49 (0)30 65762683 E-Mail: [email protected] Serie 136 – Duplex Bicolor low current OLS-136-Y/G OLS-136-SR/G OLS-136-SR/Y Features - package 1206 - size: 3.2(L) x 1.6(W) x 1.2(H) mm - circuit substrate: glass laminated epoxy - devices are ROHS conform - lead free solderable. soldering pads: gold plated - taped in 8 mm blister tape. cathodes positions to transporting perforation - all devices sorted into luminous intensity classes - taping: face-up (T) or face-down (TD) possible Electro-Optical Characteristics Die position 1 2 OLS-136 Y/G Yellow Green OLS-136 SR/G Red Green OLS-136 SR/Y Red Yellow Other combinations are possible also Type Measured at 2mA, Ta = 25°C Parameter Forward Voltage Dominate Wavelength Luminous Intensity Parameter Forward Voltage Dominate Wavelength Luminous Intensity Parameter Forward Voltage Peak Wavelength Luminous Intensity Symbol Emitting Color VF D IV G - green Symbol Emitting Color VF D IV Y - yellow Symbol Emitting Color VF P IV SR - red min 0.4 min 0.3 min 0.8 Values typ 1.9 572 1.2 Values typ 1.8 590 0.6 Values typ 1.8 655 2.0 OSA Opto Light GmbH · Tel. +49-(0)30-65762683 · [email protected] max 2.2 max 2.2 max 2.0 Units V nm mcd Units V nm mcd Units V nm mcd 1/6 edition 05/12 Absolute Maximum Ratings Parameter Values Symbol Power dissipation Forward Current, pulsed Reverse Voltage Reverse Current Thermal Resistance Operating Temperature Storage Temperature min PV,max IF,p VR IR Rth JA TOp TSt tp ≤ 100µs, = 1:10 -40 -55 max 65 100 5 100 500 +85 +85 Units mW mA V µA K/W °C °C 90 120 1,0 60 30 150 View angle 0,5 0,0 180 0 80 PD [mW] 60 Maximal forward current (DC) characteristic 40 20 0 -40 -20 0 20 40 60 80 100 Top [°C] OSA Opto Light GmbH · Tel. +49-(0)30-65762683 · [email protected] 2/6 edition 05/12 Outline Drawing Recommended Soldering Patterns IF (mA) 10 UF – I F characteristic SR G Y 1 1,6 1,7 1,8 1,9 2,0 2,1 2,2 UF (V) 1,2 1,0 G SR Y Iv rel (at 10 mA ) 0,8 IF – Iv, rel characteristic 0,6 0,4 0,2 0 2 4 6 8 10 IF (mA) OSA Opto Light GmbH · Tel. +49-(0)30-65762683 · [email protected] 3/6 edition 05/12 Soldering Conditions 300 10...20s Temperature [°C] 250 230°C 200 170°C IR reflow soldering profile 150 120°C 40s max. 100 3K/s max. 50 4K/s max 0 50 100 150 Time [s] 200 250 300 300 217°C 3K/s max Temperature [°C] 250°C 245°C 250 200 180°C 10...20s IR reflow soldering profile for lead free soldering 60s max 150 120s max 100 4K/s max 50 3K/s max 0 50 100 Manual soldering: 150 Time [s] 200 250 300 max power of iron 25W/ 3s/ 300°C OSA Opto Light GmbH · Tel. +49-(0)30-65762683 · [email protected] 4/6 edition 05/12 Ordering Code For Parts Series Color OLS-136 Encapsulation ??????? - ? - Packaging ? T – taped up X – uncolored clear XD – uncolored diffused (standard) Type definition, e.g. OLS-136 SR/Y –XD-T LED Luminous Intensity Groups And Subgroups [ mcd ] (general information – not this device specific) C: 0.28 - 0.45 D: 0.45 - 0.71 E: 0.71 - 1.12 F: 1.12 - 1.80 G: 1.80 - 2.80 H: 2.80 - 4.50 J: 4.50 - 7.10 K: 7.10 - 11.20 L: 11.20 - 18.00 M: 18 - 28 C1: C2: D1: D2: E1: E2: F1: F2: G1: G2: H1: H2: J1: J2: K1: K2: L1: L2: M1: M2: 0.28 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 - 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 Measured according to CIE 127. All SMD-LEDs are 100% measured and selected on full automated equipment with an accuracy of ± 11 %. Special service: Brightness selection in sub selections possible. Color selection in 3 sub selections possible (each subgroup per reel). Tape And Reel Packing OSA Opto Light GmbH · Tel. +49-(0)30-65762683 · [email protected] 5/6 edition 05/12 D 7’’ Packing: Parts/reel 3000 The reel is sealed in special plastic bag with integrate ESD protection ( MIL - STD 81705 ) including a silica dry-pack MSL level acc. to IPC/JEDEC J-STD 020D: Level 2 for Europe Level 2a for all other countries Label XXXXXXXXX Order No. Customer order No. ?????-??-T Type Intensity group ZZ Color class: CC Charge No. 1122-AAAAAA Quantity 9999 Color class - optional 11 Week – 22 year – A internal identification Attention please: The information describes the type of component and shall not considered as assured characteristics. Terms of delivery and rights to change reserved. Due to technical requirements components may contain dangerous substances. The data sheet may changed without prior information; the valid issue will be on our webpage in internet. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. OSA opto light does not have the responsibility for the reliability and the degradation behavior of products made with OSA opto light diodes because they depend not only on the diode but also on the conditions of manufacture or design of the final products. Packaging: Please use the recycling operators known to you. Components used in life support devices or systems, toys and safety systems must be expressly authorized for such purpose! OSA Opto Light GmbH · Tel. +49-(0)30-65762683 · [email protected] 6/6