Renewable Energy Selector Guide CX–SERIES C–SERIES E–SERIES F–SERIES NUMBER OF POLES 1- 2, + Auxiliary Switch Pole 1-6 (handle); 1-3 (rocker) 1-6 1-3 ACTUATOR STYLE Handle, 1 per pole Sealed Metal Toggle Handle, Rocker Handle Handle AVAILABLE DELAYS DC: Instantaneous, Ultrashort, Short, Medium & Long Instantaneous, Ultrashort, Short, Medium & Long, AC, DC, AC/DC High Inrush - Short, Medium & Long AC and DC Instant, Short, Medium & Long - AC, DC, and AC/DC High Inrush Short, Medium & LongAC, DC, and AC/DC Short, Medium & Long DC, AC MAXIMUM CURRENT & VOLTAGE RATINGS UL Recognized .2 -125A, 600VDC UL Listed .2-15A, 250/500VDC UL Listed 0.02-250A@80VDC 0.02-60A@125VDC 0.02-70A@120VAC 0.02-20A@240VAC ULRecognized 0.02-30A@480WYE /277VAC2-pole, 1Ø, 3-pole, 3Ø 0.02-50A@277VAC 0.02-100A@250VAC,80VDC 0.02-100A@120/240VAC, 65VDC UL Listed 0.02-100A@240VAC, 65VDC, 125VDC ULRecognized 0.02-100A@277VAC, 160VDC, 1-pole 0.02-100A@600VAC, 2-pole 1Ø, 3 pole 3Ø 0.02-120A@125VDC, 1-pole UL489 Listed: 50-250A@125VDC 100-250A@120/240VAC 100-250A@277VAC 100-250A@208Y/120 3Ø UL489A Listed 250-700A@125VDC MAXIMUM INTERRUPTING CAPACITY Up to 10,000 UL Listed and UL recognized UL Listed 50000A@80VDC, 10,000A@120VAC, 5000A@125VDC, 240VAC ULRecognized 7500A@80VDC 3000A@125/250VAC, ULonly 5000A@250VAC 5000A@480WYE/277V AC w/fuse backup UL Listed 25000A@65VDC 5000A@125VDC& 240VAC ULRecognized 5000A@125VDC 5000A@600VAC,without fuse backup 10000A@600VAC, w/fuse backup 50000A@125VDC 10000A, 120/240, 277, 208Y/120 AUXILIARY SWITCH RATING 20A, 80VDC (GO circuit) 10.1A@250VAC 0.1A@125VAC (gold contacts) 0.5A@65VDC 10.1A@250VAC 1.0A@65VDC 0.1A@80VDC 10.1A@250VAC 0.5A@65VDC 0.1A@80VDC AVAILABLE CIRCUITS Series Trip Series, Shunt,Relay, Switch Only, Series w/Remote Shutdown, Relay & Shunt Trip Dual Coil, Mid-Trip with Alarm Switch Series, Shunt, Relay, Switch Only, Series w/Remote Shutdown Series & Switch Only with or without Metering Shunt TERMINAL OPTIONS 10-32 or M5 Screw Terminals 1/4-20 or M6 Threaded Stud 10-32 Stud, 1/4-20 Stud, 0-32 Screw w/ saddle clamp, Clip Terminal, 1/4 & 7/16 Push-In 10-32 Stud, 1/4-20 Stud 0-32 Screw, 1/4-20 Screw, Box Wire Connector 3/8-16 Stud, 3/8-16 Screw& Box Wire Connector MOUNTING METHOD Threaded insert: #6-32 UNC-2B, or M3X0.5-6H B ISO (2 per pole) Threaded inserts Rear or Front Panel Rear or Front Panel AGENCY APPROVALS UL489, UL1077, TUV (EN60934-2) UL, CSA, VDE, TUV, UL1500, UL489, UL489A UL, CSA, VDE, UL1500, UL489 CUL,TUV, UL489, UL489A ENVIRONMENTAL PROTECTION MIL-PRF-55629 & MIL-STD-202 Method 213, MIL-PRF-39019F when mounted in panel MIL-PRF-55629 & MIL-STD-202 Method 213, MIL-PRF-39019F when mounted in panel MIL-PRF-55629 & MIL-STD-202F Method 213 MIL-PRF-55629 & MIL-STD-202F Method 213 OPERATING TEMPERATURE -40° C to +85° C -40° C to +85° C -40° C to +85° C -40° C to +85° C RE-SG_01_2014 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: [email protected] • www.carlingtech.com