TLG-Series Rocker Switches The TLG-Series Mini Tippette snap-in rocker switches are single pole, rocker or paddle actuated with an adjacent indicator light. These single-actuator-switches are AC rated to 20 amps and are also suitable for low voltage DC applications, in a wide range of markets including Appliance, HVAC, Food service and Transportation. Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062-1177 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: [email protected] • www.carlingtech.com 2 | TLG-Series Rocker Switches Dielectric Strength Mechanical Life UL/CSA: 1000V - live to dead metal parts 100,000 cycles Operating Temperature Electrical Life 32°F to 185°F (0°C to 85°C) 50,000 cycles - maintained 25,000 cycles - momentary TLG G 1 Base Part Number D R 2 Circuit 3 Lens Design 4 Lens Color TA 20 1 5 Center Position 6 Rating 7 Termination T B 8 Actuator Style B 9 Actuator Color 10 11 Base Color Lens Color / 125N 1 BASE PART NUMBER: SERIES TLG Single Pole with adjacent Indicator Light 8 ACTUATOR STYLE2 PS T 2 CIRCUIT4 See Circuit Designation Chart. 9 ACTUATOR COLOR lighted A Amber C Clear G Green LU Blue R Red P unlighted 2 B Black W White 3 LENS DESIGN D Diamond L Long Line 10 BASE COLOR2 B 4 LENS COLOR A C Paddle G R Amber Clear WWhite Green Red 5 BASIC SWITCH NUMBER TA On-None-Off TB On-None-On 9 LENS COLOR1,3 A C TC LTA On-Off-On On-None-Off, Lighted Amber Clear G LU incandescent 6V 6 volt 12V 12 volt 18V 18 volt 24V 24 volt 28V 28 volt 7 TERMINATION/FUNCTION Solder Lug .250 Tab QC .187 Tab QC Wire Leads On-None-Off 0 1 3 5 (On)-None-Off AB D F On-None-(Off) LM R T On-None-On 01 3 5 On-None-(On) AB D F On-Off-On 01 3 5 neon 125N 250N .156[1.75] DIA .250[6.35] 1.240[31.49] .250 TAB (Q.C.) 6.000[152.40] .250[6.35] .250[6.35] SOLDER LUG .500[12.70] .187[4.74] .187 TAB (Q.C.) TERMINAL TYPE INTEGRATED WIRE LEAD (no exposed conductors) .520[13.20] .220[5.59] 125 volt neon 250 volt neon .055[1.75] DIA .375[9.52] .390[9.90] .050[1.27] RRed WWhite Notes: Imprinting is available. Consult factory. Panel Cut-Out Recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material. 1 Neon Lamps not recommended with green or blue actuators and lenses. 2 Custom colors are available. Consult factory. 3 Specify lens color only if actuator is lighted paddle. 4 Available with circuits G, H, I, J, K only. ( ) Indicates momentary function. .069[1.75] DIA 1.155[29.33] White Green Blue 10 LAMP VOLTAGE1 6 RATING 10 5A 250VAC, 10A 125VAC, 1/2HP 125-250VAC 11 5A 250VAC, 10A 125VAC, 5A 125VAC L 20 10A 250VAC, 15A 125VAC, 3/4HP 125-250VAC 21 10A 250VAC, 15A 125VAC 22 10A 250VAC, 15A 125VAC, 20A 125-250VAC H, 3/4HP 125-250VAC Short Paddle Rocker W Black 12 Lamp Voltage 1.125[28.57] .812[20.62] .275[6.98] .375[9.52] .994[25.24] 1.000[25.40] 1.120[28.44] PADDLE *Manufacturer reserves the right to change product specification without prior notice. SHORT PADDLE MOUNTING HOLE Panel Thickness: .020[.508] min. to .250[6.35] max. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: [email protected] • www.carlingtech.com Circuit Designation Chart | 3 1 1 4 1 2 2 2 5 2 5 2 5 3 3 3 6 3 6 3 6 B 4 2 C 4 5 3 D 4 2 2 3 3 1 E 4 1 2 2 6 4 3 3 6 I J 1 4 1 4 1 4 1 4 2 5 2 5 2 5 2 5 3 6 3 6 3 6 3 6 1 4 1 5 2 6 3 1 4 1 4 2 5 2 5 3 6 3 6 3 4 1 4 5 3 6 1 4 2 5 3 6 T 1 4 1 2 5 2 5 2 3 6 3 6 3 1 4 5 2 5 2 5 6 3 6 3 6 1 Z CONTACT TERMINAL Will make contact with switching lever CONTACT TERMINAL AND SWITCH LEVER ISOLATED TERMINAL BULB Does not make contact with switching lever REV_SW_TLG_0912 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: [email protected] • www.carlingtech.com