LS-Series Softspot - Carling Technologies

LS-Series
Rocker Switches
The LS-Series Softspot illuminated rocker switches feature a three-color high
brightness light sequence, from a single lamp. These switches are designed with a
standard nylon snap-in bracket and “Drip-Dry” construction that protects the front
panel from dust and moisture, and is ideal for Marine and Transportation industry
applications.
Carling Technologies, Inc.
60 Johnson Avenue • Plainville, CT 06062-1177
Phone: (860) 793-9281 • Fax: (860) 793-9231
Email: [email protected] • www.carlingtech.com
2 | LS-Series Rocker Switches
Dielectric Strength
Mechanical Life
1000V - live to dead metal parts
100,000 cycles
Electrical Life
Operating Temperature
50,000 cycles - maintained
25,000 cycles - momentary
0°F to 150°F (-17.8°C to +65.6°C)
LS1511
1
Base Part Number
13
2
Lighting
Sequence
1 BASE PART NUMBER: SERIES/POLES/ILLUMINATION/
CIRCUITRY/RATING/TERMINATION3
10A 250VAC, 15A 125VAC, 3/4 HP 125-250VAC, 15A 15-28VDC
Single Pole
Solder Lug .250 Tab QC .187 Tab QC Wire Leads
On-None-Off
LS1510LS1511 LS1514 LS1515
On-None-(Off)
LS1520
LS1521LS1524LS1525
(On)-None-Off
LS1530
LS1531LS1534LS1535
On-None-On
LS1540
LS1541LS1544LS1545
On-None-(On)
LS1550
LS1551LS1554LS1555
On-Off-On
LS1560
LS1561LS1564LS1565
On--Off-(On)
LS1570
LS1571LS1574LS1575
(On)-Off-(On)
LS1580
LS1581LS1584LS1585
Notes:
1 Independent lamp is standard. Dependent lamp with ON-OFF function
(including momentary) is available with Lighting Sequences 10, 20, 30, 40 and 50.
(No light in OFF position.)
2 Green and blue not recommended with 125 volt or 250 volt neon lamps.
3 Additional terminations available. Consult factory.
4 Custom colors available. Consult factory.
( ) Indicates momentary function.
BL
BL
3
Actuator
Color
1.190[30.22]
.187[4.74]
.830[21.08]
SOLDER LUG
55˚ 4 plcs*
.150[3.81] DIA
1.084[27.53]
.372[9.45]
#6-32NC-2
THREAD
.141[3.58]
.370[9.39]
BL
WH
Black
White
4 BASE COLOR4
BL
WH
Black
White
5 LAMP VOLTAGE2
incandescent
6V
6 volt
12V
12 volt
18V
18 volt
24V
24 volt
28V
28 volt
neon
125N
250N
125 volt neon
250 volt neon
.055[1.40] DIA
.437[11.09]
.394[10.00]
.250[6.35]
.187[4.74]
.250 TAB (Q.C.)
6.000[152.40]
.500[12.70]
.187 TAB (Q.C.)
.187[4.75]
.187[4.75]
.350[8.89]
.286[7.26]
SCREW
(ASSEMBLED)
.422[10.72]
3 ACTUATOR COLOR4
TERMINAL TYPE
1.450[36.83]
MOUNTING HOLE
(Nylon Snap-in Brackets)
Panel Thickness:
.040 min. - .250 max.
Switch should be mounted at 90˚ for
maximum water shedding
(45˚ to 90˚ acceptable)
position 3
red
amber
green
none
red
amber
green
blue
clear
none
red
amber
green
blue
clear
none
red
amber
green
blue
clear
none
red
amber
green
blue
clear
none
red
amber
green
blue
clear
.075[1.91] DIA
.330[8.38]
.680[17.27]
.960[24.38]
5
Lamp Voltage
2 LIGHTING SEQUENCE1,2
position 1 position 2
01red
red
02amber amber
03green
green
10red
---
11red
clear
12red
clear
13red
clear
14red
clear
15red
clear
20amber ---
21amber clear
22amber clear
23amber clear
24amber clear
25amber clear
30green
---
31green
clear
32green
clear
33green
clear
34green
clear
35green
clear
40blue
---
41blue
clear
42blue
clear
43blue
clear
44blue
clear
45blue
clear
50clear
---
51clear
clear
52clear
clear
53clear
clear
54clear
clear
55clear
clear
.125[3.18] DIA
1.700[43.18]
012
4
Base Color
WIRE LEAD
PRINTED
CIRCUIT
* Angled corners are suggested for optimum fit.
Standard rectangular cutout is acceptable.
*Manufacturer reserves the right to change product specification without prior notice.
REV_SW_LS_0912
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com