Pushbutton Switches 110/316-P-Series The 110/316-P-Series pushbutton switches are heavy duty, AC/DC rated and suitable as foot-switches. These switches are available with alternate or momentary action. This series is equipped with a quick-make, quick-break contact mechanism which is both nonteasable and self-cleaning. Typical actuation force ranges from 6-8 lbs. Specifications •Certifications*: UL, CSA •Dielectric Strength: 1,000V (minimum) •Insulation Resistance: 100 Megohms (minimum) •Base Material: Phenolic •Actuator Material: Brass/Nickel Plate •Bushing Material: Brass/Nickel Plate * Due to ongoing technological advances, consult factory for certification specifics. .075[1.90] DIA .250[6.35] .093[2.36] DIA Dimensional Specifications: in. [mm] 15/32-32UNS-2A THREAD KEYWAY SIDE .293[7.44] .437[11.09] .120[3.05] .351[8.92] .250 TAB (Q.C.) (SPST only) SOLDER LUG .406[10.31] DIA .070[1.77] DIA .174[4.42] SOLDER LUG (bottom) TERMINAL TYPE #6-32NC-2 THREAD .270[6.85] .270[6.86] 6.000[152.4] .562[14.27] .080[2.03] DIA .542[13.76] END TERMINAL INTEGRATED WIRE LEAD (no exposed conductors) SCREW (ASSEMBLED) (SPST ONLY) .062[1.57] .500[12.70] DIA .500[12.70] DIA .524[13.31] 1.183[30.04] .500[12.70] .415[10.54] NOTE: .038[9.65] KEYWAY .072[1.82] X .038[.965] DP MOUNTING HOLE 110 - WITH KEYWAY P MAINTAINED (ON) MOMENTARY NORMALLY OPEN (OFF) MOMENTARY NORMALLY CLOSED TERMINAL 110-P 110-BP 110-SP 111-16-P 110-PM-OFF 110-PBM-OFF 110-SPM-OFF 111-PM-OFF 110-PM-ON 110-PBM-ON 110-SPM-ON 111-PM-ON SOLDER LUG-END SOLDER LUG-BTM SCREW TERM. WIRE LEAD SP-ST 3A 250V 6A 125V 160H-P 160H-BP 160H-SP 160H-AP NONE NONE SOLDER LUG SOLDER LUG-BTM SCREW TERM. WIRE LEAD SP-ST 5A 250V 10A 125V 1/4HP 125V 216-PP 216-PPA 216-PM-OFF 216-PAM-OFF 216-PM-ON 216-PAM-ON SOLDER LUG WIRE LEAD DP-ST 1A 250V 3A 125V CIRCUIT & POLES 112-P 112-PA ON-(ON) 112-PM 112-PAM SOLDER LUG WIRE LEAD SP-DT 316-PP 316-PPA ON-(ON) 316-PM 316-PAM SOLDER LUG WIRE LEAD DP-DT DP-DT 516-PP 516-PPA 516-PM 516-PAM SOLDER LUG WIRE LEAD 2 CIRCUIT 1 ON - 1 OFF RATING NOTES: Shading indicates standard configurations. Tab terminals available on all above SPST switches. Add suffix /TABS to end of part number. (ex.) 110-PM-OFF/TABS Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 67