Pushbutton Switches P-Series The P-Series pushbutton switches are heavy-duty, single pole switches. They are alternate action, available in single and double throw construction, with ratings up to 20 amps. Both plunger and bushing are made of plated brass. Typical actuation force is 3-5 lbs. Specifications •Certifications*: UL, CSA, TUV •Dielectric Strength: 1,000 V (minimum) •Insulation Resistance: 100 Megohms (minimum) •Base Material: Phenolic •Actuator Material: Brass/Nickel Plate •Bracket Material: Plated Steel •Bushing Material: Brass/Nickel Plate * Due to ongoing technological advances, consult factory for certification specifics. .075[1.90] DIA Dimensional Specifications: in. [mm] #6-32NC-2 THREAD 6.000[152.4] .365[9.27] 15/32-32UNS-2A THREAD .270[6.86] .317[8.05] DIA .500[12.70] .250[6.35] .283[7.18] KEYWAY .072[1.82] X .038[.965] DP SCREW (ASSEMBLED) .250 TAB (Q.C.) INTEGRATED WIRE LEAD (no exposed conductors) TERMINAL TYPE .562[14.27] .500[12.70] DIA .982[24.94] .062[1.57] .038[.965] MOUNTING HOLE 1.125[28.58] .398[10.11] WITH KEYWAY .602[15.29] P A 35 1 SERIES CIRCUIT RATING1 TERMINATION P A B 30 10A 250VAC 20A 125VAC 1 1/2HP 120-240VAC 34 10A 250VAC 15A 125VAC 3/4HP 120-240VAC 35 10A 250VAC 15A 125VAC 95 10A 250VAC 15A 125VAC 10A(6) 250Vµ T85 1 4 5 SINGLE POLE PUSHBUTTON .500[12.70] DIA ON-OFF ON-ON .250TAB (QC) SCREW TERM. WIRE LEAD NOTES: Shading indicates standard configurations. 1 For TUV approval, use rating 95. 62 Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277