Rocker Switches T-Series The T-Series Mini Tippette snap-in rocker switches are single pole with ratings up to 20 amps. A variety of circuits, actuators and terminations are available. Specifications •Certifications*: UL, CSA, VDE •Dielectric Strength: 1,000 V (minimum) •Insulation Resistance: 100 Megohms (minimum) •Base Material: Nylon •Actuator Material: Nylon •Bezel Material: Nylon * Due to ongoing technological advances, consult factory for certification specifics. .156[3.96] DIA Dimensional Specifications: in. [mm] .069[1.75] DIA .220[5.59] .375[9.52] .390[9.77] .050[1.27] .250[6.35] .055[1.40] DIA 6.000[152.40] .250[6.35] .250[6.35] .187[4.74] SOLDER LUG .250 TAB (Q.C.) .860[21.84] .187 TAB (Q.C.) .500[12.70] INTEGRATED WIRE LEAD (no exposed conductors) TERMINAL TYPE .550[13.97] .375[9.52] .250[6.35] 1.120[28.44] .544[13.81] .275[6.98] SHORT PADDLE 1.125[28.57] 1.156[29.36] .520[13.20] .047[1.19] .453[11.50] .500[12.70] MOUNTING HOLE Panel Thickness: .020[.508] min. to .250[6.35] max. .430[10.92] MOMENTARY ROCKER T OPERATING POINT A PADDLE 20 1 PLUNGER - T B SERIES RATING1 TERMINATION/FUNCTION T 10 5A 250VAC 10A 125VAC 1/2HP 125-250VAC 11 5A 250VAC 10A 125VAC 5A (TUNGSTEN) 125VAC L 20 10A 250VAC 15A 125VAC 3/4HP 125-250VAC 22 10A 250VAC 15A 125VAC 20A 125-250VAC H 3/4HP 125-250VAC 25 10A 250VAC 16A 125VAC 1/2HP 125-250VAC .250 SOLDER TAB FUNCTION LUG (QC) ON-NONE-OFF 0 1 (ON)-NONE-OFF A B ON-NONE-(OFF) L M ON-NONE-ON 0 1 ON-NONE-(ON) A B ON-OFF-ON 0 1 SINGLE POLE CIRCUIT A B C ON-NONE-OFF ON-NONE-ON ON-OFF-ON - B ACTUATOR COLOR3 .187 TAB (QC) 3 D R 3 D 3 WIRE LEAD 5 F T 5 F 5 B BLACK W WHITE BASE COLOR3 B BLACK W WHITE ACTUATOR STYLE2 P PL PS T TL PADDLE PLUNGER PADDLE - SHORT ROCKER MOMENTARY ROCKER NOTES: Shading indicates standard configurations. Stainless steel bezels are available. Add suffix “Bezel” to the end of the catalog number. (ex.) TA201-TB-B/BEZEL Imprinting is available. Please specify when ordering. (ex. TA201-TB-B/ON-OFF) Panel Cut-Out Recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material. 1 Rating Code 22 is 20A 125VAC inductive when momentary function is specified. Rating Code 22 only available with circuits A & B. Rating Code 25 only available with PL-Plunger actuator. 2 PL-Plunger actuator available only in T Series with circuit A, termination/function B or F, and terminals at T1 and 2. 3 Custom colors are available. Consult factory. 34 Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277